0037
ZURICH ENGINEERING
Designations
Conformity assessment annexesAnnex VI Art.8, 2(c), 2nd indent, Annex VI Art.8, 2(c), 1st indent, Annex VI Art.8, 2(b) and 2c, 3rd indent
Designated since2006-04-09
Full scope text from the register
Annexes
- Annex VI Art.8, 2(c), 2nd indent, Annex VI Art.8, 2(c), 1st indent, Annex VI Art.8, 2(b) and 2c, 3rd indent
Procedures
- Certification of adequacy for the technical file, EC type-examination, Receipt of technical file
Products
- Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)
- Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)
- Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s. (section A9 of annex IV)
- Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A16 of annex IV)
- Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)
- Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A13 of annex IV)
Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=0037
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=0037
This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.