AENOR CONFIA, S.A.U.

🇪🇸 Spain · MADRID Suspended

www.aenor.com

Designations

CPR Construction products · Regulation (EU) No 305/2011 Suspended

Designated since2012-06-14

Full scope text from the register

Product families

Curtain wallings (1/1)
Products related to concrete, mortar and grout (1/2)
Products related to concrete, mortar and grout (2/2)
Structural timber products (1/3)
Floorings (2/2)
Structural metallic products and ancillaries (1/4)
Structural metallic products and ancillaries (2/4)
Structural metallic products and ancillaries (3/4)
Internal and external wall and ceiling finishes (3/5)
Cements, building limes and other hydraulic binders
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
Wood-based panels (1/2)
Road construction products (2/2)
Road construction products (1/2)
Precast normal/lightweight/autoclaved aerated concrete products (1/1)
Thermal insulating products (2/2)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Masonry and related products (1/3)
Masonry and related products (3/3)
Aggregates for uses with high safety requirements (2/2)
Flat glass, profiled glass and glass-block products (1/6)
Chimneys, flues and specific products (1/1)
Circulation fixtures (1/2)
Geotextiles (1/2)
Roof coverings, rooflights, roof windows and ancillary products (2/6)
Fasteners for structural timber products (1/1)
Construction adhesives (1/2)
Membranes (1/3)
Membranes (2/3)

Functions

FPC Certification Body
Product Certification Body

Intended use

to be used in metal structures or in composite metal and concrete structures
for use in a glazed assembly intended specifically to provide fire resistance
for uses in structural metallic works
as internal or external finishes in walls or ceilings subject to reaction to fire regulations
in walls and partitions subject to reaction to fire regulations
for structural elements in internal or external applications
for railway works
for circulation areas
for uses subject to regulations on reaction to fire
in buildings, roads and other civil engineering work
as internal finishes in walls or ceilings subject to reaction to fire regulations
chimneys
preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products
for circulation area
for uses subject to reaction to fire regulations
for roads and other civil engineering works
for structural uses in buildings and other civil engineering works
as internal or external finishes in ceilings subject to reaction to fire regulations
for structural timber products
for road construction and surface treatment of roads
in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal
as external walls subject to reaction to fire requirements
preparation of concrete, mortar, grout and other mixes for road bases stabilisation
for internal uses
in buildings
for surface treatments of roads
fire/smoke compartmentation and on escape routes
for other uses in buildings and civil engineering works
bridges, railtracks and buildings
for internal uses including enclosed public transport premises
in walls, columns and partitions
for structural use
for structural uses in concrete, mortar and grout
for bridge decks
fire safety
for hydraulic structures and other civil engineering works
for uses in work's frames and foundations
for concrete, mortar and grout

Standards

Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling
Agglomerated stone - Modular tiles for flooring and stairs (internal and external)
Aggregates for concrete
Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
Aggregates for mortar
Aggregates for railway ballast
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
Armourstone - Part 1: Specification
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements
Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions
Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders
Bitumen and bituminous binders - Specifications for hard paving grade bitumens
Bitumen and bituminous binders - Specifications for paving grade bitumen
Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete
Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers
Bituminous mixtures - Material specifications - Part 3: Soft Asphalt
Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt
Bituminous mixtures - Material specifications - Part 7: Porous Asphalt
Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
Building hardware - Controlled door closing devices - Requirement and test methods
Building hardware - Door coordinator devices - Requirements and test methods
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods
Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
Building hardware - Single-axis hinges - Requirements and tests methods
Calcium aluminate cement - Composition, specifications and conformity criteria
Cement - Composition, specifications and conformity criteria for very low heat special cements
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements
Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods
Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods
Chimneys - Clay/ceramic flue liners - Requirements and test methods
Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances
Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances
Chimneys - System chimneys with plastic flue liners - Requirements and test methods
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
Curtain walling - Product standard
Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
EN 1020:2009
EN 10025-1:2004
EN 10088-4:2009
EN 10088-5:2009
EN 10210-1:2006
EN 10219-1:2006
EN 10340:2007
EN 10340:2007/AC:2008
EN 10340:2007/AC:2008 Steel casting for structural uses
EN 10343:2009
EN 1036-2:2008
EN 1090-1:2009
EN 1090-1:2009 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
EN 1090-1:2009+A1:2011
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
EN 1090-1:2009/AC:2010
EN 1090-1:2009/AC:2010 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
EN 1096-4:2004
EN 1125:2008
EN 1154:1996/A1:2002
EN 1154:1996/A1:2002/AC:2006
EN 1154:1996/A1:2002/AC:2006 Building hardware - Controlled door closing devices - Requirements and test methods
EN 1155:1996/A1:2002/AC:2006
EN 1155:1996/A1:2002/AC:2006 Building hardware - Electrically powered hold-open devices for swin doors - Requirements and test methods
EN 1155:1997/A1:2002
EN 1158:1997/A1:2002
EN 1158:1997/A1:2002/AC:2006
EN 1158:1997/A1:2002/AC:2006 - Building hardware - Door coordinator devices - Requirements and test methods
EN 1168:2005+A2:2009
EN 1168:2005+A2:2009 Precast concrete products - Hollow core slabs
EN 1168:2005+A3:2011
EN 1168:2005+A3:2011 Precast concrete products - Hollow core slabs
EN 12094-10:2003
EN 12094-11:2003
EN 12094-12:2003
EN 12094-13:2001
EN 12094-13:2001/AC:2002
EN 12094-13:2001/AC:2002 Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves
EN 12094-1:2003
EN 12094-2:2003
EN 12094-3:2003
EN 12094-4:2004
EN 12094-5:2006
EN 12094-5:2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems
EN 12094-6:2006
EN 12094-6:2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices for CO2 systems
EN 12094-7:2000
EN 12094-7:2000/A1:2005
EN 12094-8:2006
EN 12094-9:2003
EN 12101-10:2005
EN 12101-10:2005/AC:2007
EN 12101-10:2005/AC:2007 Smoke and heat control systems - Part 10: Power supplies
EN 12101-1:2005
EN 12101-1:2005/A1:2006
EN 12101-1:2005/A1:2006 - Smoke and heat control systems - Part 1: Specification for smoke barriers
EN 12101-2:2003
EN 12101-3:2002
EN 12101-3:2002/AC:2005
EN 12101-6:2005
EN 12101-6:2005/AC:2006
EN 12101-6:2005/AC:2006 Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits
EN 12101-7:2011
EN 12101-8:2011
EN 12150-2:2004
EN 12209:2003
EN 12209:2003/AC:2005
EN 12209:2003/AC:2005 Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
EN 12259-1:1999 + A1:2001
EN 12259-1:1999 + A1:2001/A3:2006 - Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers
EN 12259-1:1999+A1:01/A2:04
EN 12259-1:1999+A1:01/A3:06
EN 12259-2:1999/A1:2001
EN 12259-2:1999/A2:2005
EN 12259-2:1999/A2:2005 - Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies
EN 12259-2:1999/AC:2002
EN 12259-3:2000/A1:2001
EN 12259-3:2000/A2:2005
EN 12259-3:2000/A2:2005 - Fixed firefighting systems - Components for automatic sprinkler and water spray systems - Part 3: Dry alarm valve assemblies
EN 12259-4:2000/A1:2001
EN 12259-5:2002
EN 12271:2006
EN 12273:2008
EN 12337-2:2004
EN 12352:2006
EN 12368:2006
EN 12416-1:2001
EN 12416-1:2001/A1:2004
EN 12416-2:2001
EN 12446:2011
EN 12446:2011 Chimneys - Components - Concrete outer wall elements
EN 12591:2009
EN 12620:2002+A1:2008
EN 12737:2004+A1:2007
EN 1279-5:2005+A2:2010
EN 1279-5:2005+A2:2010 Glass in building - Insulating glass units - Part 5: Evaluation of conformity
EN 12794:2005+A1:2007
EN 12794:2005+A1:2007 - Precast concrete products - Foundation piles
EN 12794:2005+A1:2007/AC:2008
EN 12794:2005+A1:2007/AC:2008 Precast concrete products - Foundation piles
EN 12843:2004
EN 12878:2005
EN 12878:2005/AC:2006
EN 12878:2005/AC:2006 Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
EN 12899-1:2007
EN 12899-2:2007
EN 12899-3:2007
EN 12966-1:2005+A1:2009
EN 12966-1:2005+A1:2009 Road vertical signs - Variable message traffic signs - Part 1: Product standard
EN 13024-2:2004
EN 13043:2002
EN 13043:2002/AC:2004
EN 13043:2002/AC:2004 - Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
EN 13055-1:2002
EN 13055-1:2002/AC:2004
EN 13055-1:2002/AC:2004 Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
EN 13055-2:2004
EN 13063-1:2005+A1:2007
EN 13063-1:2005+A1:2007 - Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance
EN 13063-2:2005+A1:2007
EN 13063-2:2005+A1:2007 - Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions
EN 13063-3:2007
EN 13063-3:2007 - Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys
EN 13069:2005
EN 13084-5:2005
EN 13084-5:2005/AC:2006
EN 13084-5:2005/AC:2006 Free-standing chimneys - Part 5: Material for brick liners - Product specifications
EN 13084-7:2005
EN 13084-7:2005/AC:2009
EN 13084-7:2005/AC:2009 Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
EN 13108-1:2006
EN 13108-1:2006/AC:2008
EN 13108-1:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete
EN 13108-2:2006
EN 13108-2:2006/AC:2008
EN 13108-2:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers
EN 13108-3:2006
EN 13108-3:2006/AC:2008
EN 13108-3:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 3: Soft Asphalt
EN 13108-4:2006
EN 13108-4:2006/AC:2008
EN 13108-4:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
EN 13108-5:2006
EN 13108-5:2006/AC:2008
EN 13108-5:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
EN 13108-6:2006
EN 13108-6:2006/AC:2008
EN 13108-6:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt
EN 13108-7:2006
EN 13108-7:2006/AC:2008
EN 13108-7:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 7: Porous Asphalt
EN 13139:2002
EN 13139:2002/AC:2004
EN 13139:2002/AC:2004 Aggregates for mortar
EN 13162:2008
EN 13162:2008 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
EN 13163:2008
EN 13163:2008 Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
EN 13164:2008
EN 13164:2008 Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
EN 13165:2008
EN 13165:2008 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
EN 13166:2008
EN 13166:2008 Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
EN 13167:2008
EN 13167:2008 Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
EN 13168:2008
EN 13168:2008 Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
EN 13169:2008
EN 13169:2008 Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
EN 1317-5:2007+A2:2012
EN 1317-5:2007+A2:2012 Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
EN 1317-5:2007+A2:2012/AC:2012
EN 1317-5:2007+A2:2012/AC:2012 Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
EN 13170:2008
EN 13170:2008 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
EN 13171:2008
EN 13171:2008 Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
EN 1319:2009
EN 13224:2004+A1:2007
EN 13224:2004+A1:2007- Precast concrete products - Ribbed floor elements
EN 13224:2011
EN 13224:2011 Precast concrete products - Ribbed floor elements
EN 13225:2004
EN 13225:2004/AC:2006
EN 13225:2004/AC:2006 Precast concrete products - Linear structural elements
EN 13242:2002+A1:2007
EN 13249:2000
EN 13249:2000/A1:2005
EN 13250:2000
EN 13250:2000/A1:2005
EN 13250:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
EN 13251:2000
EN 13251:2000/A1:2005
EN 13251:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
EN 13252:2000
EN 13252:2000/A1:2005
EN 13252:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
EN 13253:2000
EN 13253:2000/A1:2005
EN 13253:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
EN 13254:2000
EN 13254:2000/A1:2005
EN 13254:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
EN 13254:2000/AC:2003
EN 13254:2000/AC:2003 Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
EN 13255:2000
EN 13255:2000/A1:2005
EN 13255:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
EN 13255:2000/AC:2003
EN 13255:2000/AC:2003 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
EN 13256:2000
EN 13256:2000/A1:2005
EN 13256:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
EN 13256:2000/AC:2003
EN 13256:2000/AC:2003 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
EN 13257:2000
EN 13257:2000/A1:2005
EN 13257:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
EN 13257:2000/AC:2003
EN 13257:2000/AC:2003 - Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
EN 13263-1:2005+A1:2009
EN 13263-1:2005+A1:2009 Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
EN 13265:2000
EN 13265:2000/A1:2005
EN 13265:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
EN 13265:2000/AC:2003
EN 13265:2000/AC:2003 - Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
EN 13361:2004
EN 13361:2004/A1:2006
EN 13361:2004/A1:2006 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
EN 13362:2005
EN 13383-1:2002
EN 13383-1:2002/AC:2004
EN 13383-1:2002/AC:2004 Armourstone - Part 1: Specification
EN 13450:2002
EN 13450:2002/AC:2004
EN 13450:2002/AC:2004 Aggregates for railway ballast
EN 13454-1:2004
EN 13479:2004
EN 13491:2004
EN 13491:2004/A1:2006
EN 13491:2004/A1:2006 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
EN 13492:2004
EN 13492:2004/A1:2006
EN 13492:2004/A1:2006 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
EN 13493:2005
EN 13693:2004+A1:2009
EN 13693:2004+A1:2009 Precast concrete products - Special roof elements
EN 13707:2004+A2:2009
EN 13707:2004+A2:2009 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
EN 13747:2005+A2:2010
EN 13808:2005
EN 13813:2002
EN 13830:2003
EN 13859-1:2010
EN 13859-1:2010 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
EN 13859-2:2010
EN 13859-2:2010 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
EN 13924:2006
EN 13924:2006/AC:2006
EN 13924:2006/AC:2006 Bitumen and bituminous binders - Specifications for hard paving grade bitumens
EN 13956:2005
EN 13956:2005/AC:2006
EN 13956:2005/AC:2006 Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
EN 13956:2012
EN 13956:2012 Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
EN 13964:2004
EN 13964:2004/A1:2006
EN 13964:2004/A1:2006 Suspended ceilings - Requirements and test methods
EN 13967:2004
EN 13967:2004/A1:2006
EN 13967:2004/A1:2006 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
EN 13969:2004
EN 13969:2004/A1:2006
EN 13969:2004/A1:2006 Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
EN 13970:2004
EN 13970:2004/A1:2006
EN 13970:2004/A1:2006 Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
EN 13978-1:2005
EN 13984:2004
EN 13984:2004/A1:2006
EN 13984:2004/A1:2006 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
EN 13984:2013
EN 13984:2013 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
EN 13986:2004
EN 14023:2010
EN 14023:2010 Bitumen and bituminous binders - Specification framework for polymer modified bitumens
EN 14041:2004
EN 14041:2004/AC:2006
EN 14063-1:2004
EN 14063-1:2004/AC:2006
EN 14063-1:2004/AC:2006 Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation
EN 14064-1:2010
EN 14081-1:2005+A1:2011
EN 14081-1:2005+A1:2011 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
EN 14178-2:2004
EN 14179-2:2005
EN 14216:2004
EN 14229:2010
EN 1423:2012
EN 1423:2012 Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two
EN 1423:2012/AC:2013
EN 1423:2012/AC:2013 Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two
EN 14250:2010
EN 14303:2009
EN 14303:2009+A1:2013
EN 14303:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification
EN 14304:2009
EN 14304:2009+A1:2013
EN 14304:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification
EN 14305:2009
EN 14305:2009+A1:2013
EN 14305:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification
EN 14306:2009
EN 14306:2009+A1:2013
EN 14306:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification
EN 14307:2009
EN 14307:2009+A1:2013
EN 14307:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification
EN 14308:2009
EN 14308:2009+A1:2013
EN 14308:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification
EN 14309:2009
EN 14309:2009+A1:2013
EN 14309:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification
EN 14313:2009
EN 14313:2009+A1:2013
EN 14313:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
EN 14314:2009
EN 14314:2009+A1:2013
EN 14314:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification
EN 14321-2:2005
EN 14339:2005
EN 14342:2005+A1:2008
EN 14351-1:2006+A1:2010
EN 14384:2005
EN 14449:2005
EN 14449:2005/AC:2005
EN 14449:2005/AC:2005 - Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
EN 14471:2005
EN 14545:2008
EN 1457:1999/A1:2002
EN 1457:1999/A1:2002/AC:2007
EN 1457:1999/AC:2006
EN 14604:2005
EN 14604:2005/AC:2008
EN 14604:2005/AC:2008 Smoke alarm devices
EN 1463-1:2009
EN 14647:2005
EN 14647:2005/AC:2006
EN 14647:2005/AC:2006 Calcium aluminate cement - Composition, specifications and conformity criteria
EN 14695:2010
EN 14716:2004
EN 14843:2007
EN 14843:2007 - Precast concrete products - Stairs
EN 14844:2006+A1:2008
EN 14844:2006+A1:2008 Precast concrete products - Box culverts
EN 14844:2006+A2:2011
EN 14844:2006+A2:2011 Precast concrete products - Box culverts
EN 14846:2008
EN 14889-1:2006
EN 14889-2:2006
EN 14904:2006
EN 14909:2006
EN 14915:2006
EN 14915:2006/AC:2007
EN 14933:2007
EN 14933:2007 - Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification
EN 14934:2007
EN 14934:2007 - Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification
EN 14967:2006
EN 14989-1:2007
EN 14989-2:2007
EN 14991:2007
EN 14992:2007
EN 15037-1:2008
EN 15037-2:2009+A1:2011
EN 15037-3:2009+A1:2011
EN 15037-4:2010
EN 1504-2:2004
EN 1504-3:2005
EN 1504-4:2004
EN 1504-5:2004
EN 1504-6:2006
EN 1504-7:2006
EN 15048-1:2007
EN 15050:2007+A1:2012
EN 15050:2007+A1:2012 Precast concrete products - Bridge elements
EN 15088:2005
EN 15167-1:2006
EN 1520:2011
EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
EN 15258:2008
EN 15274:2007
EN 15275:2007
EN 15275:2007/AC:2010
EN 15275:2007/AC:2010 Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
EN 15285:2008
EN 15285:2008/AC:2008
EN 15285:2008/AC:2008 - Agglomerated stone - Modular tiles for flooring and stairs (internal and external)
EN 15322:2009
EN 15368:2008+A1:2010
EN 15381:2008
EN 15382:2008
EN 15650:2010
EN 15743:2010
EN 15824:2009
EN 1748-1-2:2004
EN 1748-2-2:2004
EN 179:2008
EN 1806:2006
EN 1856-1:2009
EN 1856-1:2009 Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 1856-2:2009
EN 1856-2:2009 Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes
EN 1857:2010
EN 1857:2010 Chimneys - Components - Concrete flue liners
EN 1858:2008+A1:2011
EN 1858:2008+A1:2011 Chimneys - Components - Concrete flue blocks
EN 1863-2:2004
EN 1935:2002
EN 1935:2002/AC:2003
EN 1935:2002/AC:2003 Building hardware - Single-axis hinges - Requirements and test methods
EN 197-1:2000
EN 197-1:2000/ A1:2004
EN 197-1:2000/A3:2007
EN 197-1:2011
EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 197-4:2004
EN 40-4:2005
EN 40-4:2005/AC:2006
EN 40-4:2005/AC:2006 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
EN 40-5:2002
EN 40-6:2002
EN 40-7:2002
EN 413-1:2011
EN 413-1:2011 Masonry cement - Part 1: Composition, specifications and conformity criteria
EN 416-1:2009
EN 438-7:2005
EN 450-1:2005+A1:2007
EN 450-1:2012
EN 450-1:2012 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
EN 54-10:2002
EN 54-10:2002/A1:2005
EN 54-10:2002/A1:2005 - Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors
EN 54-11:2001
EN 54-11:2001/A1:2005
EN 54-11:2001/A1:2005 - Fire detection and fire alarm systems - Part 11: Manual call points
EN 54-12:2002
EN 54-16:2008
EN 54-17:2005
EN 54-17:2005/AC:2007
EN 54-17:2005/AC:2007 - Fire detection and fire alarm systems - Part 17: Short-circuit isolators
EN 54-18:2005
EN 54-18:2005/AC:2007
EN 54-18:2005/AC:2007 - Fire detection and fire alarm systems - Part 18: Input/output devices
EN 54-20:2006
EN 54-20:2006/AC:2008
EN 54-20:2006/AC:2008 Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
EN 54-21:2006
EN 54-23:2010
EN 54-24:2008
EN 54-25: 2008/AC:2012 Fire detection and fire alarm systems - Part 25: Components using radio links
EN 54-25:2008
EN 54-25:2008/AC:2012
EN 54-2:1997
EN 54-2:1997/A1:2006
EN 54-2:1997/A1:2006 - Fire detection and fire alarm systems - Part 2: Control and indicating equipment
EN 54-2:1997/AC:1999
EN 54-2:1997/AC:1999 - Fire detection and fire alarm systems - Part 2: Control and indicating equipment
EN 54-3:2001/A1:2002
EN 54-3:2001/A2:2006
EN 54-4:1997
EN 54-4:1997/A1:2002
EN 54-4:1997/A2:2006
EN 54-4:1997/A2:2006 Fire detection and fire alarm systems - Part 4: Power supply equipment
EN 54-4:1997/AC:1999
EN 54-5:2000/A1:2002
EN 54-7:2000/A1:2002
EN 54-7:2000/A2:2006
EN 54-7:2000/A2:2006 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization
EN 572-9:2004
EN 621:2009
EN 671-1:2001
EN 671-1:2001/AC:2002
EN 671-1:2001/AC:2002 Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
EN 671-2: 2001
EN 671-2:2001/A1:2004
EN 671-2:2001/A1:2004 Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
EN 771-1:2011
EN 771-1:2011 Specification for masonry units - Part 1: Clay masonry units
EN 771-2:2011
EN 771-2:2011 Specification for masonry units - Part 2: Calcium silicate masonry units
EN 771-3:2011
EN 771-3:2011 Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
EN 771-4:2011
EN 771-4:2011 Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
EN 771-5:2011
EN 771-5:2011 Specification for masonry units - Part 5: Manufactured stone masonry units
EN 771-6:2011
EN 771-6:2011 Specification for masonry units - Part 6: Natural stone masonry units
EN 777-1:2009
EN 777-2:2009
EN 777-3:2009
EN 777-4:2009
EN 778:2009
EN 934-2:2009
EN 934-2:2009 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
EN 934-3:2009
EN 934-3:2009 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling
EN 934-4:2009
EN 934-4:2009 Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
EN 934-5:2007
EN 998-2:2010
EN 998-2:2010 Specification for mortar for masonry – Part 2: Masonry mortar
Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity
Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors
Fire detection and fire alarm systems - Part 11: Manual call points
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors - Line detectors using an optical beam
Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
Fire detection and fire alarm systems - Part 17: Short-circuit isolators
Fire detection and fire alarm systems - Part 18: Input/output devices
Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment
Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices
Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers
Fire detection and fire alarm systems - Part 25: Components using radio links
Fire detection and fire alarm systems - Part 2: Control and indicating equipment
Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders
Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders.
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 5: Heat detectors - Point detectors
Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization
Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches
Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves
Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators
Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO2 systems
Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO2 systems
Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors
Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components
Fixed firefighting systems - Powder systems - Part 2: Design, construction and maintenance
Fixed firefighting systems - Powder systems- Part 1: Requirements and test methods for components
Fixed firefighting systems components for sprinkler and waterspray systems - Part 1:Sprinklers
Fixed, vertical road traffic signs - Part 1: Fixed signs
Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors
Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics
Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
Free-standing chimneys - Part 5: Material for brick liners - Product specifications
Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
General purpose adhesives for structural assembly - Requirements and test methods
Geosynthetic Barriers - Characteristics required for use in the construction of canals
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
Geosynthetic barriers - Characteristics required for use in transportation infrastructure
Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
Geotextiles and geotextile-related products - Characteristics required fro use in pavements and asphalt overlays
Geotextiles and geotextile-related products -Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion )
Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity
product standard
Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
Hot rolled products of structural steels - Part 1: General technical delivery conditions
Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria
Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
Lighting columns - Part 5: Requirements for steel lighting columns
Lighting columns - Part 6: Requirements for aluminium lighting columns
Lighting columns -Part 7: Requirements for fibre reinforced polymer composite lighting columns
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety
Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety
Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety
Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety
Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
Non-preloaded structural bolting assemblies - Part 1: General requirements
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
Pillar fire hydrants
Precast concrete products - Floor slats for livestock
Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks
Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks
Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks
Precast concrete products - Beam-and-block floor systems - Part 1: Beams
Precast concrete products - Floor plates for floor systems
Precast concrete products - Foundation elements
Precast concrete products - Linear structural elements
Precast concrete products - Masts and poles
Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
Precast concrete products - Retaining wall elements
Precast concrete products - Wall elements
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
Required characteristics for geotextiles and geotextile-related products used in the construction of railways
Resilient, textile and laminate floor coverings - Essential characteristics
Resilient, textile and laminate floor coverings - Essential characteristics
Road marking materials - Retroflecting road studs - Part 1: Initial performance requirements
Screed material and floor screeds - Screed materials - Properties and requirements
Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety
Slurry surfacing - Requirements
Smoke alarm devices
Smoke and heat control systems - Part 10: Power supplies
Smoke and heat control systems - Part 1: Specification for smoke barriers
Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators
Smoke and heat control systems - Part 3 : Specification for powered smoke and heat exhaust ventilators
Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators
Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits
Smoke and heat control systems - Part 7: Smoke duct sections
Smoke and heat control systems - Part 8: Smoke control dampers
Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking
Solid wood panelling and cladding — Characteristics, evaluation of conformity and marking (AC)
Specification for external renders and internal plasters based on organic binders
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
Steel casting for structural uses
Steels for quenching and tempering for construction purposes - Technical delivery conditions
Stretched ceilings - Requirements and test methods
Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
Structural timber – Wood poles for overhead lines
Supersulfated cement - Composition, specifications and conformity criteria
Surface dressing - Requirements
Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
Suspended ceilings - Requirements and test methods
Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation
Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification
Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation
Timber structures - Connectors - Requirements
Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
Traffic control equipment - Signal heads
Traffic control equipment - Warning and safety light devices
Underground fire hydrants
Ventilation for buildings - Fire dampers
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
Wood flooring - Characteristics, evaluation of conformity and marking
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

LVD Low voltage electrical equipment · Directive 2014/35/EU Suspended

Conformity assessment annexesArticle 8, Article 9

Designated since2006-04-09

Full scope text from the register

Annexes

Article 8, Article 9

Procedures

Report consequent on a challenge (Art 8), Opinion on a safeguard action (Art 9)

Products

Electrical equipment designed for use within certain voltage limits

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=0099

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.