Shirley Technologies Limited, trading as BTTG

🇬🇧 United Kingdom · M17 1EH Withdrawn

www.bttg.co.uk

Designations

CPR Construction products · Regulation (EU) No 305/2011 Withdrawn

Designated since2006-06-29

Full scope text from the register

Product families

Self-supporting translucent roof kits (except glass-based kits) (2/3)
Light composite wood-based beams and columns (1/1)
Fire stopping, fire sealing and fire protection products (1/2)
Timber frame and log prefabricated building kits (1/1)
Products related to concrete, mortar and grout (2/2)
Space heating appliances (2/2)
Flat glass, profiled glass and glass-block products (2/6)
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (3/6)
Roof coverings, rooflights, roof windows and ancillary products (2/6)
Structural sealant glazing kits of types (curtain walling)
External thermal insulation composite systems/kits with rendering (ETICS)(1/1)
Waste water engineering products inside buildings (2/2)
Waste water engineering products outside buildings (2/3)
Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1)
Internal and external wall and ceiling finishes (1/5)
Internal and external wall and ceiling finishes (2/5)
Internal and external wall and ceiling finishes (3/5)
Internal and external wall and ceiling finishes (4/5)
Thermal insulating products (1/2)
Thermal insulating products (2/2)
Gypsum products (1/4)
Gypsum products (2/4)
Curtain wallings (1/1)
Structural timber products (1/3)
Wood-based panels (1/2)
Wood-based panels (2/2)
Internal partition kits (1/5)
Internal partition kits (2/5)
Internal partition kits (3/5)
Internal partition kits (4/5)
Liquid applied roof waterproofing kits (1/3)
Liquid applied roof waterproofing kits (2/3)
Liquid applied roof waterproofing kits (3/3)
Prefabricated stair kits (1/2)
Prefabricated stair kits (2/2)
Floorings (2/2)
Membranes (1/3)
Membranes (2/3)
Membranes (3/3)
Geotextiles (1/2)

Functions

FPC Certification Body
Testing Laboratory
Product Certification Body

Intended use

as external walls not subject to reaction to fire requirements
for structural elements in internal or external applications
bridges, railtracks and buildings
in building works
for use inside building
for external uses
as internal or external finishes in walls or ceilings subject to reaction to fire regulations
as internal or external stiffening elements in walls or ceilings
for internal uses
as internal or external finishes in walls or ceilings, as relevant, subject to regulations on dangerous substances
for fire compartmentation and/or fire protection or fire performance
in buildings
for uses liable to present "safety-in-use" risks and subject to such regulations
in internal or external suspended ceilings subject to safety in use requirements
as internal finishes in walls or ceilings subject to reaction to fire regulations
in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal
for uses subject to reaction to fire requirements
for dwellings and other buildings
as internal or external finish in ceilings subject to safety in use requirements
for uses subject to regulations on reaction to fire
for the construction of external and internal walls subject to fire regulations, in buildings
as internal or external finishes, as complete elements, used for fire protection of walls or ceilings
to be used outside buildings, for waste water from buildings and civil engineering works including roads
in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings
for uses subject to external fire performance regulations
as internal or external finishes in ceilings subject to reaction to fire regulations
as internal or external finishes in walls or ceilings subject to requirements against accidental injuries from cutting objects
as internal or external finishes used for fire protection of ceilings
for uses subject to reaction to fire regulations
as external finishes in walls or ceilings subject to reaction to fire regulations
for non structural elements in internal or external applications
for uses subject to regulations on dangerous substances
as internal or external finishes in walls or ceilings subject to regulations on dangerous substances
for external walls and roofs
as external walls subject to reaction to fire requirements
for structural elements in internal or external application
any
for internal uses including enclosed public transport premises
in walls, partitions or ceilings (or lining thereof) subject to reaction to fire requirements
for all roof waterproofing uses
for fire compartmentation
in external wall subject to fire regulations

Standards

Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements
Ceramic tiles - Definitions, classification, characteristics and marking (ISO 13006:1998, modified)
Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
Curtain walling - Product standard
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
EN 1096-4:2004
EN 12050-1:2001
EN 12050-2:2000
EN 12050-3:2000
EN 12050-4:2000
EN 12057:2004
EN 12058:2004
EN 12150-2:2004
EN 12337-2:2004
EN 12859:2001
EN 12859:2001/A1:2004
EN 12860:2001
EN 13024-2:2004
EN 13162:2001
EN 13163:2001
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13170:2001
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13249:2000
EN 13249:2000/A1:2005
EN 13250:2000
EN 13251:2000
EN 13252:2000
EN 13253:2000
EN 13254:2000
EN 13255:2000
EN 13256:2000
EN 13257:2000
EN 13265:2000
EN 13361:2004
EN 13362:2005
EN 13454-1:2004
EN 13491:2004
EN 13492:2004
EN 13493:2005
EN 13707:2004
EN 13813:2002
EN 13830:2003
EN 13859-1:2005
EN 13859-2:2004
EN 13964:2004
EN 13967:2004
EN 13969:2004
EN 13970:2004
EN 13984:2004
EN 13986:2004
EN 14016-1:2004
EN 14041:2004
EN 14178-2:2004
EN 1433:2002
EN 14374:2004
EN 14411:2003
EN 1469:2004
EN 14716:2004
EN 1504-2:2004
EN 1504-4:2004
EN 1504-5:2004
EN 1748-1-2:2004
EN 1748-2-2:2004
EN 1863-2:2004
EN 438-7:2005
EN 442-1:1995/ A1:2003
EN 490:2004
EN 492:2004
EN 492:2004/A1:2005
EN 520:2004
EN 572-9:2004
Fibre-cement slates and fittings - Product specification and test methods
Fibre-cement slates and fittings - Product specification and test methods
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
Geosynthetic Barriers - Characteristics required for use in the construction of canals
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
Geotextiles and geotextile-related products -Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion )
Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum plasterboards - Definitions, requirements and test methods
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
Natural stone products - Modular tiles - Requirements
Natural stone products - Slabs for cladding - Requirements
Natural stone products - Slabs for floors and stairs - Requirements
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
Radiators and convectors - Part 1: Technical specifications and requirements
Required characteristics for geotextiles and geotextile-related products used in the construction of railways
Resilient, textile and laminate floor coverings - Essential characteristics
Screed material and floor screeds - Screed materials - Properties and requirements
Stretched ceilings - Requirements and test methods
Suspended ceilings - Requirements and test methods
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Timber structures - Structural laminated veneer lumber - Requirements
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4 : Non-return valves for faecal-free wastewater and wastewater containing faecal matter
Wastewater lifting plants for buildings and sites- Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=0338

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.