0393
DGUV Test Prüf- und Zertifizierungsstelle Hebezeuge, Sicherheitskomponenten und Maschinen Fachbereich Holz und Metall der Deutschen Gesetzlichen Unfallversicherung e.V. (DGUV)
Designations
Conformity assessment annexesArticle 8, Article 9
Designated since2006-04-09
Full scope text from the register
Annexes
- Article 8, Article 9
Procedures
- Report consequent on a challenge (Art 8), Opinion on a safeguard action (Art 9)
Products
- Electrical equipment designed for use within certain voltage limits
Conformity assessment annexesAnnex IX - Art. 12 (3) (b) and (4) (a), Annex X - Art. 12 (3) (c) and (4) (b)
Designated since2016-07-07
Full scope text from the register
Annexes
- Annex IX - Art. 12 (3) (b) and (4) (a), Annex X - Art. 12 (3) (c) and (4) (b)
Procedures
- Full quality assurance, EC type-examination
Products
- 20. Power-operated interlocking movable guards designed to be used as safeguards in machinery referred to in points 9, 10 and 11
- 10. Injection or compression plastics-moulding machinery with manual loading or unloading
- 19. Protective devices designed to detect the presence of persons
- 17. Devices for the lifting of persons or of persons and goods involving a hazard of falling from a vertical height of more than three metres
- 9. Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s
- 11. Injection or compression rubber-moulding machinery with manual loading or unloading
- 21. Logic units to ensure safety functions
Conformity assessment annexesAnnex IX - Art. 12 (3) (b) and (4) (a), Annex X - Art. 12 (3) (c) and (4) (b)
Designated since2016-07-07
Full scope text from the register
Annexes
- Annex IX - Art. 12 (3) (b) and (4) (a), Annex X - Art. 12 (3) (c) and (4) (b)
Procedures
- Full quality assurance, EC type-examination
Products
- 20. Power-operated interlocking movable guards designed to be used as safeguards in machinery referred to in points 9, 10 and 11
- 10. Injection or compression plastics-moulding machinery with manual loading or unloading
- 19. Protective devices designed to detect the presence of persons
- 17. Devices for the lifting of persons or of persons and goods involving a hazard of falling from a vertical height of more than three metres
- 9. Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s
- 11. Injection or compression rubber-moulding machinery with manual loading or unloading
- 21. Logic units to ensure safety functions
Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=0393
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=0393
This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.