Universität Stuttgart Materialprüfungsanstalt (MPA Stuttgart, Otto-Graf-Institut, (FMPA))

🇩🇪 Germany · Stuttgart Active

www.mpa.uni-stuttgart.de

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active

Designated since2006-04-09

Full scope text from the register

Product families

Chimneys, flues and specific products (1/1)
Gypsum products (2/4)
Gypsum products (3/4)
Structural bearings (1/1)
Structural sealant glazing kits of types (curtain walling)
Metal anchors for use in concrete (mechanical fasteners)
Metal injection anchors for use in masonry (1/1)
Cements, building limes and other hydraulic binders
External thermal insulation composite systems/kits with rendering (ETICS)(1/1)
Fasteners for structural timber products (1/1)
Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1)
Thermal insulating products (2/2)
Light composite wood-based beams and columns (1/1)
Masonry and related products (1/3)
Masonry and related products (2/3)
Aggregates for uses with high safety requirements (2/2)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Plastic anchors for use in concrete and masonry (1/1)
Wood-based panels (1/2)
Wood-based panels (2/2)
Floorings (2/2)
Curtain wallings (1/1)
Internal and external wall and ceiling finishes (1/5)
Internal and external wall and ceiling finishes (2/5)
Internal and external wall and ceiling finishes (3/5)
Internal and external wall and ceiling finishes (4/5)
Internal partition kits (1/5)
Internal partition kits (2/5)
Internal partition kits (3/5)
Internal partition kits (4/5)
Liquid applied roof waterproofing kits (1/3)
Liquid applied roof waterproofing kits (2/3)
Liquid applied roof waterproofing kits (3/3)
Precast normal/lightweight/autoclaved aerated concrete products (1/1)
Products related to concrete, mortar and grout (1/2)

Functions

Testing Laboratory
Inspection Body
Product Certification Body
FPC Certification Body

Intended use

as external walls subject to reaction to fire requirements
for railway works
for the construction of external and internal walls not subject to fire regulations, in buildings
as external walls not subject to reaction to fire requirements
for fixing and/or supporting concrete structural elements or heavy units such as cladding and suspended ceilings
for the construction of external and internal walls subject to fire regulations, in buildings
for external uses
as internal or external finishes in ceilings subject to reaction to fire regulations
for fire compartmentation
in walls, columns and partitions
for uses subject to external fire performance regulations
in buildings and civil engineering works where requirements on individual beraings are not critical
in buildings, roads and other civil engineering work
in external wall not subject to fire regulations
for structural elements in internal or external applications
for internal uses
for uses liable to present "safety-in-use" risks and subject to such regulations
chimneys
in buildings and civil engineering works where requirements on individual bearings are critical
for non structural elements in internal or external applications
in external wall subject to fire regulations
as internal or external finishes in walls or ceilings, as relevant, subject to regulations on dangerous substances
for all roof waterproofing uses
for concrete, mortar and grout
in walls and partitions
in buildings
as internal or external finishes used for fire protection of ceilings
fixing and/or supporting to masonry, structural elements (which contribute to the stability of the works) or heavy units such as claddings as well as installations
for use in systems, such as facade systems, for fixing or supporting elements which contribute to the stability of the systems
fire/smoke compartmentation and on escape routes
for structural use
for hydraulic structures and other civil engineering works
for roads and other civil engineering works
for uses subject to regulations on dangerous substances
as internal or external finishes in walls or ceilings subject to regulations on dangerous substances
for uses subject to regulations on reaction to fire
for non-structural use or light structural use
for stiffening timber-framed windload bearing walls or timber roof struss structures
preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products
for uses subject to reaction to fire requirements
as internal or external finish in ceilings subject to safety in use requirements
for structural timber products
as internal or external stiffening elements in walls or ceilings
as internal or external finishes, as complete elements, used for fire protection of walls or ceilings
in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings
for external walls and roofs
for structural elements in internal or external application
as internal or external finishes in walls or ceilings subject to reaction to fire regulations
for uses subject to reaction to fire regulations

Standards

Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
Aggregates for concrete
Aggregates for mortar
Aggregates for railway ballast
Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
Armourstone - Part 1: Specification
Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements
Building hardware - Controlled door closing devices - Requirement and test methods
Building hardware - Door coordinator devices - Requirements and test methods
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
Building lime - Part 1: Definitions, specifications and conformity criteria
Cement - Composition, specifications and conformity criteria for very low heat special cements
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Chimneys - Clay/ceramic flue liners - Requirements and test methods
Curtain walling - Product standard
EN 1154:1996/A1:2002
EN 1155:1997/A1:2002
EN 1158:1997/A1:2002
EN 12620:2002
EN 12843:2004
EN 12859:2001
EN 12859:2001/A1:2004
EN 12860:2001
EN 12878:2005
EN 13043:2002
EN 13055-1:2002
EN 13139:2002
EN 13162:2001
EN 13163:2001
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13170:2001
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13224:2004
EN 13225:2004
EN 13242:2002
EN 13263-1:2005
EN 1337-4:2004
EN 1337-6:2004
EN 1337-7:2004
EN 13383-1:2002
EN 13450:2002
EN 13813:2002
EN 13830:2003
EN 13964:2004
EN 13986:2004
EN 14016-1:2004
EN 14041:2004
EN 14216:2004
EN 1457:1999/A1:2002
EN 1520:2002
EN 197-1:2000
EN 197-1:2000/ A1:2004
EN 413-1:2004
EN 438-7:2005
EN 450-1:2005
EN 459-1:2001
EN 520:2004
EN 771-1:2003
EN 771-1:2003/A1:2005
EN 771-2:2003
EN 771-2:2003/A1:2005
EN 771-3:2003
EN 771-3:2003/A1:2005
EN 771-4:2003
EN 771-4:2003/A1:2005
EN 845-1:2003
EN 845-2:2003
EN 845-3:2003
EN 934-2:2001
EN 934-2:2001/A1:2004
EN 934-3:2003
EN 934-4:2001
EN 998-2:2003
Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum plasterboards - Definitions, requirements and test methods
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
Masonry cement - Part 1: Composition, specifications and conformity criteria
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
Precast concrete products - Linear structural elements
Precast concrete products - Masts and poles
Precast concrete products - Ribbed floor elements
Prefabricated reinforced components of lightweight aggregate concrete with open structure
Resilient, textile and laminate floor coverings - Essential characteristics
Screed material and floor screeds - Screed materials - Properties and requirements
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets
Specification for ancillary components for masonry - Part 2: Lintels
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 2: Calcium silicate masonry units
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for mortar for masonry - Part 2: Masonry mortar
Structural bearings - Part 4: Roller bearings
Structural bearings - Part 6: Rocker bearings
Structural bearings - Part 7: Spherical and cylindrical PTFE bearings
Suspended ceilings - Requirements and test methods
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=0672

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.