Centre Scientifique et Technique du Bâtiment (CSTB)

🇫🇷 France · Marne-la-Vallée Cedex 2 Withdrawn

www.cstb.fr

Designations

CPR Construction products · Regulation (EU) No 305/2011 Withdrawn

Designated since2006-04-09

Full scope text from the register

Product families

Chimneys, flues and specific products (1/1)
Gypsum products (2/4)
Structural sealant glazing kits of types (curtain walling)
Metal anchors for use in concrete (mechanical fasteners)
Plastic anchors for use in concrete and masonry (1/1)
Waste water engineering products inside buildings (2/2)
Waste water engineering products outside buildings (1/3)
Waste water engineering products outside buildings (2/3)
External thermal insulation composite systems/kits with rendering (ETICS)(1/1)
Internal partition kits (1/5)
Internal partition kits (2/5)
Internal partition kits (3/5)
Internal partition kits (4/5)
Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1)
Thermal insulating products (2/2)
Light composite wood-based beams and columns (1/1)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Pipes, tanks and ancillaries not in contact with water intended for human consumption (1/5)
Masonry and related products (1/3)
Masonry and related products (2/3)
Timber frame and log prefabricated building kits (1/1)
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
Fasteners for structural timber products (1/1)
Floorings (2/2)
Systems of mechanically fastened flexible roof waterproofing membranes (1/1)
Post-tensioning kits for the prestressing of structures (1/1)
Liquid applied roof waterproofing kits (1/3)
Liquid applied roof waterproofing kits (2/3)
Liquid applied roof waterproofing kits (3/3)
Self-supporting translucent roof kits (except glass-based kits) (1/3)
Self-supporting translucent roof kits (except glass-based kits) (2/3)
Self-supporting translucent roof kits (except glass-based kits) (3/3)
Prefabricated stair kits (1/2)
Prefabricated stair kits (2/2)
Construction adhesives (1/2)
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (1/6)
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (2/6)
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (3/6)
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (4/6)
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (5/6)
Curtain wallings (1/1)
Metal anchors for use in concrete for fixing lightweight systems (1/1)
Internal and external wall and ceiling finishes (3/5)
Roof coverings, rooflights, roof windows and ancillary products (2/6)
Roof coverings, rooflights, roof windows and ancillary products (3/6)
Roof coverings, rooflights, roof windows and ancillary products (5/6)
Precast normal/lightweight/autoclaved aerated concrete products (1/1)
Structural timber products (1/3)

Functions

Testing Laboratory
Product Certification Body
Inspection Body

Intended use

for external walls and roofs
in external wall not subject to fire regulations
for the construction of external and internal walls subject to fire regulations, in buildings
for internal uses
for uses subject to reaction to fire regulations
for all roof waterproofing uses
in walls, columns and partitions
for uses subject to external fire performance regulations
chimneys
for uses subject to resistance to fire regulations (eg fire compartmentation)
in building works
for the prestressing of structures
for use inside building
in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings
for fire compartmentation
for internal and external uses in buildings and other civil engineering works
fire/smoke compartmentation and on escape routes
in installations for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building
bridges, railtracks and buildings
other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use (i.e. NOT for fire/smoke compartmentation, NOT for escape routes)
to be used outside buildings, for waste water from buildings and civil engineering works including roads
in walls and partitions
as internal finishes in walls or ceilings subject to reaction to fire regulations
for uses contributing to stiffening the structure
as external walls subject to reaction to fire requirements
for roof waterproofing
for uses subject to reaction to fire requirements
fire safety
for uses subject to regulations on reaction to fire
for use in roofs and roof finishes
for non-structural use or light structural use
for dwellings and other buildings
for the construction of external and internal walls not subject to fire regulations, in buildings
for use in reduntant systems for fixing and/or supporting to concrete elements such as lightweight suspended ceilings, as well as installations
in external wall subject to fire regulations
for structural timber products
as external walls not subject to reaction to fire requirements
for fixing and/or supporting concrete structural elements or heavy units such as cladding and suspended ceilings
for use in systems, such as facade systems, for fixing or supporting elements which contribute to the stability of the systems
for internal uses including enclosed public transport premises
for uses liable to present "safety-in-use" risks and subject to such regulations
for uses subject to regulations on dangerous substances
for structural use
for external uses
in buildings
to be used outside buildings, for rain water, faecal and organic effluents

Standards

Adhesives for tiles - Definitions and specifications
Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements
Building hardware - Controlled door closing devices - Requirement and test methods
Building hardware - Door coordinator devices - Requirements and test methods
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods
Building hardware - Single-axis hinges - Requirements and tests methods
Ceramic tiles - Definitions, classification, characteristics and marking (ISO 13006:1998, modified)
Chimneys - Clay/ceramic flue liners - Requirements and test methods
Chimneys - Components - Concrete flue blocks
Chimneys - Components - Concrete flue liners
Chimneys - Components - Concrete outer wall elements
Chimneys - Requirements for metal chimneys - Part 1: System chimney products
Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes
Clay roofing tiles and fittings - Product definitions and specifications
Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
Curtain walling - Product standard
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
EN 1125:1997/A1:2001
EN 1154:1996/A1:2002
EN 1155:1997/A1:2002
EN 1158:1997/A1:2002
EN 12004:2001/A1:2002
EN 12050-1:2001
EN 12050-2:2000
EN 12050-3:2000
EN 12050-4:2000
EN 12101-3:2002
EN 12209:2003
EN 12326-1:2014
EN 12446:2003
EN 12566-1:2000/A1:2003
EN 12859:2001
EN 12859:2001/A1:2004
EN 12860:2001
EN 1304:2005
EN 13162:2001
EN 13163:2001
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13170:2001
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13241-1:2003
EN 13813:2002
EN 13830:2003
EN 14016-1:2004
EN 14041:2004
EN 14041:2004/AC:2006
EN 14250:2004
EN 1433:2002
EN 14374:2004
EN 14411:2003
EN 1457:1999/A1:2002
EN 14716:2004
EN 1520:2002
EN 179:1997/A1:2001
EN 1856-1:2003
EN 1856-2:2004
EN 1857:2003
EN 1858:2003
EN 1935:2002
EN 490:2004
EN 682:2002
EN 771-1:2003
EN 771-2:2003
EN 771-3:2003
EN 771-4:2003
EN 771-5:2003
EN 845-1:2003
EN 845-2:2003
EN 845-3:2003
EN 998-2:2003
Elastomeric Seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics
Prefabricated reinforced components of lightweight aggregate concrete with open structure
Resilient, textile and laminate floor coverings - Essential characteristics
Resilient, textile and laminate floor coverings - Essential characteristics
Screed material and floor screeds - Screed materials - Properties and requirements
Slate and stone products for discontinuous roofing and cladding - Part 1: Product specification
Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks
Smoke and heat control systems - Part 3 : Specification for powered smoke and heat exhaust ventilators
Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets
Specification for ancillary components for masonry - Part 2: Lintels
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 2: Calcium silicate masonry units
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 5: Manufactured stone masonry units
Specification for mortar for masonry - Part 2: Masonry mortar
Stretched ceilings - Requirements and test methods
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
Timber structures - Structural laminated veneer lumber - Requirements
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4 : Non-return valves for faecal-free wastewater and wastewater containing faecal matter
Wastewater lifting plants for buildings and sites- Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=0679

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.