BELGIAN CONSTRUCTION CERTIFICATION ASSOCIATION ASBL (BCCA)

🇧🇪 Belgium · Diegem Active

www.bcca.be

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active

Designated since2006-08-31

Full scope text from the register

Product families

Flat glass, profiled glass and glass-block products (1/6)
Flat glass, profiled glass and glass-block products (4/6)
Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1)
Thermal insulating products (2/2)
Structural sealant glazing kits of types (curtain walling)
Metal anchors for use in concrete (mechanical fasteners)
Chimneys, flues and specific products (1/1)
External thermal insulation composite systems/kits with rendering (ETICS)(1/1)
Plastic anchors for use in concrete and masonry (1/1)
Internal partition kits (1/5)
Geotextiles (1/2)
Internal and external wall and ceiling finishes (3/5)
Membranes (1/3)
Membranes (2/3)
Liquid applied roof waterproofing kits (3/3)
Self-supporting translucent roof kits (except glass-based kits) (3/3)
Fire stopping, fire sealing and fire protection products (1/2)
Products related to concrete, mortar and grout (1/2)
Curtain wallings (1/1)
Masonry and related products (1/3)
Floorings (2/2)
Systems of mechanically fastened flexible roof waterproofing membranes (1/1)
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (3/6)
Roof coverings, rooflights, roof windows and ancillary products (2/6)

Functions

Product Certification Body
FPC Certification Body

Intended use

in external wall subject to fire regulations
chimneys
for use as anti-bullet, or anti-explosion glazing
for roof waterproofing
for use in a glazed assembly intended specifically to provide fire resistance
in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal
for the construction of external and internal walls subject to fire regulations, in buildings
for fire compartmentation and/or fire protection or fire performance
as external walls subject to reaction to fire requirements
for external walls and roofs
for internal uses
for fixing and/or supporting concrete structural elements or heavy units such as cladding and suspended ceilings
for use in systems, such as facade systems, for fixing or supporting elements which contribute to the stability of the systems
for uses subject to regulations on reaction to fire
for the construction of external and internal walls not subject to fire regulations, in buildings
in external wall not subject to fire regulations
in buildings
as internal finishes in walls or ceilings subject to reaction to fire regulations
in walls, columns and partitions
for uses subject to reaction to fire regulations
as internal or external finishes in ceilings subject to reaction to fire regulations
for uses subject to reaction to fire requirements
for other uses in buildings and civil engineering works

Standards

Chimneys - Clay/ceramic flue liners - Requirements and test methods
Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
Chimneys - Requirements for metal chimneys - Part 1: System chimney products
Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes
Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance
Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions
Chimneys - System chimneys with plastic flue liners - Requirements and test methods
Curtain walling - Product standard
EN 1096-4:2004
EN 12150-2:2004
EN 12337-2:2004
EN 1279-5:2005
EN 13024-2:2004
EN 13063-1:2005
EN 13063-2:2005
EN 13069:2005
EN 13084-5:2005
EN 13084-7:2005
EN 13162:2001
EN 13163:2001
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13164:2001/AC:2005
EN 13164:2001/AC:2005 - Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13165:2001/A2:2004
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13170:2001
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13361:2004
EN 13362:2005
EN 13491:2004
EN 13492:2004
EN 13493:2005
EN 13707:2004
EN 13813:2002
EN 13830:2003
EN 13859-1:2005
EN 13859-2:2004
EN 13956:2005
EN 13964:2004
EN 13967:2004
EN 13969:2004
EN 13970:2004
EN 13984:2004
EN 14041:2004
EN 14041:2004/AC:2006
EN 14063-1:2004
EN 14178-2:2004
EN 14179-2:2005
EN 14316-1:2004
EN 14317-1:2004
EN 14321-2:2005
EN 14449:2005
EN 14471:2005
EN 1457:1999/A1:2002
EN 14716:2004
EN 1504-2:2004
EN 1504-3:2005
EN 1504-4:2004
EN 1504-5:2004
EN 1748-1-2:2004
EN 1748-2-2:2004
EN 1856-1:2003
EN 1856-2:2004
EN 1863-2:2004
EN 1873:2005
EN 572-9:2004
EN 771-1:2003
EN 771-1:2003/A1:2005
EN 771-6:2005
Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
Free-standing chimneys - Part 5: Material for brick liners - Product specifications
Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
Geosynthetic Barriers - Characteristics required for use in the construction of canals
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Insulating glass units - Part 5: Evaluation of conformity
Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
Resilient, textile and laminate floor coverings - Essential characteristics
Resilient, textile and laminate floor coverings - Essential characteristics
Screed material and floor screeds - Screed materials - Properties and requirements
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 6: Natural stone masonry units
Stretched ceilings - Requirements and test methods
Suspended ceilings - Requirements and test methods
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=0749

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.