Karlsruher Institut für Technologie (KIT) Materialprüfungs- und Forschungsanstalt, MPA Karlsruhe

🇩🇪 Germany · Karlsruhe Active

www.betoninstitut.de

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active

Designated since2006-09-08

Full scope text from the register

Product families

Masonry and related products (1/3)
Masonry and related products (2/3)
Floorings (2/2)
Aggregates for uses with high safety requirements (2/2)
Thermal insulating products (2/2)
Construction adhesives (1/2)
Products related to concrete, mortar and grout (1/2)
Products related to concrete, mortar and grout (2/2)
Post-tensioning kits for the prestressing of structures (1/1)
Precast normal/lightweight/autoclaved aerated concrete products (1/1)
Waste water engineering products outside buildings (2/3)
Cements, building limes and other hydraulic binders
Chimneys, flues and specific products (1/1)
Structural bearings (1/1)
Metal anchors for use in concrete (mechanical fasteners)
Plastic anchors for use in concrete and masonry (1/1)

Functions

Inspection Body
Testing Laboratory
Product Certification Body
FPC Certification Body

Intended use

for structural use
in buildings and civil engineering works where requirements on individual bearings are critical
in buildings, roads and other civil engineering work
for internal uses
for uses subject to regulations on reaction to fire
for fixing and/or supporting concrete structural elements or heavy units such as cladding and suspended ceilings
preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products
for roads and other civil engineering works
for internal and external uses in buildings and other civil engineering works
in walls and partitions
in walls, columns and partitions
for non-structural use or light structural use
for the prestressing of structures
in buildings and civil engineering works where requirements on individual beraings are not critical
for uses subject to reaction to fire regulations
to be used outside buildings, for waste water from buildings and civil engineering works including roads
for use in systems, such as facade systems, for fixing or supporting elements which contribute to the stability of the systems
for other uses in buildings and civil engineering works
for uses with low performance requirements in buildings and civil engineering works
chimneys
for concrete, mortar and grout

Standards

Adhesives for tiles - Definitions and specifications
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
Aggregates for concrete
Aggregates for mortar
Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
Building lime - Part 1: Definitions, specifications and conformity criteria
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements
Chimneys - Components - Concrete flue blocks
Chimneys - Components - Concrete flue liners
Chimneys - Components - Concrete outer wall elements
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
EN 12004:2001/A1:2002
EN 12446:2003
EN 12620:2002
EN 13043:2002
EN 13055-1:2002
EN 13139:2002
EN 13162:2001
EN 13242:2002
EN 1337-3:2005
EN 1337-4:2004
EN 1337-5:2005
EN 1337-6:2004
EN 1337-7:2004
EN 13813:2002
EN 1433:2002
EN 1504-2:2004
EN 1504-4:2004
EN 1504-5:2004
EN 1520:2002
EN 1857:2003
EN 1858:2003
EN 197-1:2000
EN 197-1:2000/ A1:2004
EN 197-4:2004
EN 413-1:2004
EN 459-1:2001
EN 771-1:2003
EN 771-1:2003/A1:2005
EN 771-2:2003
EN 771-2:2003/A1:2005
EN 771-3:2003
EN 771-3:2003/A1:2005
EN 771-4:2003
EN 771-4:2003/A1:2005
EN 845-1:2003
EN 845-2:2003
EN 845-3:2003
EN 934-2:2001
EN 934-4:2001
EN 998-2:2003
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
Masonry cement - Part 1: Composition, specifications and conformity criteria
Prefabricated reinforced components of lightweight aggregate concrete with open structure
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
Screed material and floor screeds - Screed materials - Properties and requirements
Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets
Specification for ancillary components for masonry - Part 2: Lintels
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 2: Calcium silicate masonry units
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for mortar for masonry - Part 2: Masonry mortar
Structural bearings - Part 3: Elastomeric bearings
Structural bearings - Part 4: Roller bearings
Structural bearings - Part 5: Pot bearings
Structural bearings - Part 6: Rocker bearings
Structural bearings - Part 7: Spherical and cylindrical PTFE bearings
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=0754

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.