Materialprüfanstalt für das Bauwesen (MPA BS)

🇩🇪 Germany · Braunschweig Active

www.mpa.tu-bs.de

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active

Designated since2007-01-19

Full scope text from the register

Product families

Light composite wood-based beams and columns (1/1)
Precast normal/lightweight/autoclaved aerated concrete products (1/1)
Fire stopping, fire sealing and fire protection products (1/2)
Fire stopping, fire sealing and fire protective products (2/2)
Products related to concrete, mortar and grout (1/2)
Products related to concrete, mortar and grout (2/2)
Systems of mechanically fastened flexible roof waterproofing membranes (1/1)
Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1)
Post-tensioning kits for the prestressing of structures (1/1)
Timber frame and log prefabricated building kits (1/1)
Construction adhesives (1/2)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Wood-based panels (1/2)
Wood-based panels (2/2)
Internal and external wall and ceiling finishes (1/5)
Internal and external wall and ceiling finishes (2/5)
Internal and external wall and ceiling finishes (3/5)
Internal and external wall and ceiling finishes (4/5)
Membranes (1/3)
Membranes (2/3)
Masonry and related products (1/3)
Masonry and related products (2/3)
Internal partition kits (1/5)
Aggregates for uses with high safety requirements (2/2)
Liquid applied roof waterproofing kits (1/3)
Liquid applied roof waterproofing kits (3/3)
Thermal insulating products (2/2)
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
Floorings (2/2)
Gypsum products (1/4)
Gypsum products (2/4)
Gypsum products (3/4)
Cements, building limes and other hydraulic binders
External thermal insulation composite systems/kits with rendering (ETICS)(1/1)

Functions

Inspection Body
FPC Certification Body
Testing Laboratory
Product Certification Body

Intended use

in walls, columns and partitions
for uses subject to reaction to fire requirements
for stiffening timber-framed windload bearing walls or timber roof struss structures
in external wall not subject to fire regulations
for uses subject to reaction to fire regulations
as internal or external finishes in walls or ceilings subject to regulations on dangerous substances
for internal and external uses in buildings and other civil engineering works
for other uses in buildings and civil engineering works
preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products
in buildings, roads and other civil engineering work
in external wall subject to fire regulations
fire/smoke compartmentation and on escape routes
as internal or external finishes used for fire protection of ceilings
in building works
for roof waterproofing
for the construction of external and internal walls not subject to fire regulations, in buildings
for the construction of external and internal walls subject to fire regulations, in buildings
for structural elements in internal or external applications
as internal or external finishes in ceilings subject to reaction to fire regulations
in walls and partitions
for non structural elements in internal or external applications
for uses subject to regulations on reaction to fire
for structural elements in internal or external application
in walls, partitions or ceilings (or lining thereof) subject to reaction to fire requirements
in buildings
for all roof waterproofing uses
for the prestressing of structures
for fire compartmentation and/or fire protection or fire performance
as internal or external finish in ceilings subject to safety in use requirements
fire safety
in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings
for internal uses
for structural use

Standards

Adhesives for tiles - Definitions and specifications
Aggregates for concrete
Aggregates for mortar
Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods
Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods
Building hardware - Single-axis hinges - Requirements and tests methods
Building lime - Part 1: Definitions, specifications and conformity criteria
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 1125:1997/A1:2001
EN 12004:2001/A1:2002
EN 12101-2:2003
EN 12101-3:2002
EN 12101-6:2005
EN 12620:2002
EN 12859:2001
EN 12859:2001/A1:2004
EN 12860:2001
EN 13055-1:2002
EN 13139:2002
EN 13162:2001
EN 13163:2001
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13170:2001
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13813:2002
EN 13859-1:2005
EN 13859-2:2004
EN 13963:2005
EN 13964:2004
EN 13967:2004
EN 13984:2004
EN 13986:2004
EN 1504-2:2004
EN 1504-4:2004
EN 1504-5:2004
EN 1520:2002
EN 179:1997/A1:2001
EN 1935:2002
EN 197-1:2000
EN 197-1:2000/ A1:2004
EN 459-1:2001
EN 520:2004
EN 771-1:2003
EN 771-1:2003/A1:2005
EN 771-2:2003
EN 771-2:2003/A1:2005
EN 771-3:2003
EN 771-3:2003/A1:2005
EN 771-4:2003
EN 771-4:2003/A1:2005
EN 771-5:2003
EN 771-5:2003/A1:2005
EN 845-1:2003
EN 845-2:2003
EN 845-3:2003
EN 998-2:2003
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum plasterboards - Definitions, requirements and test methods
Jointing materials for gypsum plasterboards - Definitions, requirements and test methods
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
Prefabricated reinforced components of lightweight aggregate concrete with open structure
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
Screed material and floor screeds - Screed materials - Properties and requirements
Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators
Smoke and heat control systems - Part 3 : Specification for powered smoke and heat exhaust ventilators
Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits
Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets
Specification for ancillary components for masonry - Part 2: Lintels
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 2: Calcium silicate masonry units
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 5: Manufactured stone masonry units
Specification for masonry units - Part 5: Manufactured stone masonry units
Specification for mortar for masonry - Part 2: Masonry mortar
Suspended ceilings - Requirements and test methods
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=0761

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.