Finder EU notified body intelligence
0957

SKG-IKOB Certificatie B.V.

🇳🇱 Netherlands · GELDERMALSEN Active

www.skgikob.nl

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active
Designated since2006-10-19
Full scope text from the register
Product families
  • Internal partition kits (1/5)
  • Roof coverings, rooflights, roof windows and ancillary products (5/6)
  • Internal and external wall and ceiling finishes (3/5)
  • Aggregates for uses with high safety requirements (2/2)
  • Membranes (1/3)
  • Membranes (2/3)
  • Curtain wallings (1/1)
  • Gypsum products (2/4)
  • External thermal insulation composite systems/kits with rendering (ETICS)(1/1)
  • Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1)
  • Thermal insulating products (2/2)
  • Wood-based panels (2/2)
  • Cements, building limes and other hydraulic binders
  • Masonry and related products (1/3)
  • Masonry and related products (2/3)
Functions
  • Testing Laboratory
  • Product Certification Body
  • FPC Certification Body
  • Inspection Body
Intended use
  • as external walls subject to reaction to fire requirements
  • for hydraulic structures and other civil engineering works
  • for the construction of external and internal walls subject to fire regulations, in buildings
  • for non structural elements in internal or external applications
  • in external wall subject to fire regulations
  • in external wall not subject to fire regulations
  • for uses subject to regulations on dangerous substances
  • in walls and partitions
  • in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings
  • preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products
  • for roads and other civil engineering works
  • in buildings, roads and other civil engineering work
  • for railway works
  • for the construction of external and internal walls not subject to fire regulations, in buildings
  • as external walls not subject to reaction to fire requirements
  • as internal or external finishes in ceilings subject to reaction to fire regulations
  • in buildings
  • in walls, columns and partitions
  • for uses subject to reaction to fire requirements
  • for uses subject to reaction to fire regulations
  • for uses subject to regulations on reaction to fire
Standards
  • Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
  • Aggregates for concrete
  • Aggregates for mortar
  • Aggregates for railway ballast
  • Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
  • Building lime - Part 1: Definitions, specifications and conformity criteria
  • Cement - Composition, specifications and conformity criteria for very low heat special cements
  • Cement - Part 1: Composition, specifications and conformity criteria for common cements
  • Cement - Part 1: Composition, specifications and conformity criteria for common cements
  • Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements
  • Curtain walling - Product standard
  • EN 12326-1:2014
  • EN 12620:2002
  • EN 12859:2001
  • EN 12859:2001/A1:2004
  • EN 12860:2001
  • EN 13043:2002
  • EN 13055-1:2002
  • EN 13055-2:2004
  • EN 13139:2002
  • EN 13162:2001
  • EN 13163:2001
  • EN 13164:2001
  • EN 13164:2001/ A1:2004
  • EN 13165:2001
  • EN 13165:2001/ A1:2004
  • EN 13166:2001
  • EN 13166:2001/ A1:2004
  • EN 13167:2001
  • EN 13167:2001/ A1:2004
  • EN 13168:2001
  • EN 13168:2001/ A1:2004
  • EN 13169:2001
  • EN 13169:2001/ A1:2004
  • EN 13170:2001
  • EN 13171:2001
  • EN 13171:2001/ A1:2004
  • EN 13242:2002
  • EN 13450:2002
  • EN 13707:2004
  • EN 13830:2003
  • EN 13964:2004
  • EN 13986:2004
  • EN 14216:2004
  • EN 197-1:2000
  • EN 197-1:2000/ A1:2004
  • EN 197-4:2004
  • EN 413-1:2004
  • EN 459-1:2001
  • EN 520:2004
  • EN 771-1:2003
  • EN 771-1:2003/A1:2005
  • EN 771-2:2003
  • EN 771-2:2003/A1:2005
  • EN 771-3:2003
  • EN 771-3:2003/A1:2005
  • EN 771-4:2003
  • EN 771-4:2003/A1:2005
  • EN 771-5:2003
  • EN 771-5:2003/A1:2005
  • EN 845-1:2003
  • EN 845-2:2003
  • EN 845-3:2003
  • EN 998-2:2003
  • Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
  • Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
  • Gypsum blocks - Definitions, requirements and test methods
  • Gypsum blocks - Definitions, requirements and test methods
  • Gypsum plasterboards - Definitions, requirements and test methods
  • Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
  • Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
  • Masonry cement - Part 1: Composition, specifications and conformity criteria
  • Slate and stone products for discontinuous roofing and cladding - Part 1: Product specification
  • Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets
  • Specification for ancillary components for masonry - Part 2: Lintels
  • Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
  • Specification for masonry units - Part 1: Clay masonry units
  • Specification for masonry units - Part 1: Clay masonry units
  • Specification for masonry units - Part 1: Clay masonry units
  • Specification for masonry units - Part 2: Calcium silicate masonry units
  • Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
  • Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
  • Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
  • Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
  • Specification for masonry units - Part 5: Manufactured stone masonry units
  • Specification for masonry units - Part 5: Manufactured stone masonry units
  • Specification for mortar for masonry - Part 2: Masonry mortar
  • Suspended ceilings - Requirements and test methods
  • Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
  • Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
  • Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
  • Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
  • Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
  • Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
  • Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
  • Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
  • Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
  • Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
  • Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
  • Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification
  • Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
  • Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
  • Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
  • Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
  • Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
  • Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=0957

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.