LAPI LABORATORIO PREVENZIONE INCENDI SPA

🇮🇹 Italy · - PRATO Withdrawn

www.laboratoriolapi.it

Designations

CPR Construction products · Regulation (EU) No 305/2011 Withdrawn

Designated since2006-04-09

Full scope text from the register

Product families

Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Gypsum products (2/4)
Gypsum products (3/4)
Gypsum products (4/4)
Wood-based panels (1/2)
Wood-based panels (2/2)
Floorings (2/2)
Thermal insulating products (1/2)
Thermal insulating products (2/2)
Internal and external wall and ceiling finishes (1/5)
Internal and external wall and ceiling finishes (2/5)
Internal and external wall and ceiling finishes (3/5)
Internal and external wall and ceiling finishes (4/5)

Functions

Product Certification Body
Testing Laboratory
Inspection Body

Intended use

for non structural elements in internal or external applications
as internal or external stiffening elements in walls or ceilings
as internal or external finishes, as complete elements, used for fire protection of walls or ceilings
as internal or external finishes in walls or ceilings, as relevant, subject to regulations on dangerous substances
for external uses
in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings
as internal or external finishes in walls or ceilings subject to reaction to fire regulations
any
in walls, partitions or ceilings, as relevant for situations and uses not mentioned in (1/4), (2/4), or (3/4)
for internal uses
for structural elements in internal or external applications
fire/smoke compartmentation and on escape routes
for stiffening timber-framed windload bearing walls or timber roof struss structures
for structural elements in internal or external application
for uses subject to regulations on reaction to fire

Standards

Building hardware - Controlled door closing devices - Requirement and test methods
Building hardware - Door coordinator devices - Requirements and test methods
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods
Building hardware - Single-axis hinges - Requirements and tests methods
EN 1125:1997/A1:2001
EN 1154:1996/A1:2002
EN 1155:1997/A1:2002
EN 1158:1997/A1:2002
EN 12209:2003
EN 12859:2001
EN 12859:2001/A1:2004
EN 12860:2001
EN 13162:2001
EN 13163:2001
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13170:2001
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13813:2002
EN 13986:2002
EN 14041:2004
EN 179:1997/A1:2001
EN 1935:2002
EN 438-7:2005
EN 520:2004
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum plasterboards - Definitions, requirements and test methods
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
Resilient, textile and laminate floor coverings - Essential characteristics
Screed material and floor screeds - Screed materials - Properties and requirements
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=0987

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.