Austrian Standards plus GmbH

🇦🇹 Austria · WIEN Active

www.austrian-standards.at

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active

Designated since2006-09-19

Full scope text from the register

Product families

Membranes (1/3)
Membranes (2/3)
Flat glass, profiled glass and glass-block products (1/6)
Flat glass, profiled glass and glass-block products (4/6)
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
Thermal insulating products (2/2)
Masonry and related products (1/3)
Precast normal/lightweight/autoclaved aerated concrete products (1/1)
Curtain wallings (1/1)
Internal and external wall and ceiling finishes (3/5)
Structural timber products (1/3)
Structural timber products (2/3)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Geotextiles (1/2)
Floorings (2/2)
Products related to concrete, mortar and grout (1/2)
Products related to concrete, mortar and grout (2/2)
Wood-based panels (1/2)
Wood-based panels (2/2)
Systems of mechanically fastened flexible roof waterproofing membranes (1/1)
Internal partition kits (1/5)
Aggregates for uses with high safety requirements (2/2)
Chimneys, flues and specific products (1/1)
Structural sealant glazing kits of types (curtain walling)
Cements, building limes and other hydraulic binders
External thermal insulation composite systems/kits with rendering (ETICS)(1/1)
Liquid applied roof waterproofing kits (3/3)
Roof coverings, rooflights, roof windows and ancillary products (2/6)

Functions

Product Certification Body
FPC Certification Body

Intended use

for railway works
for bridges and buildings
in external wall not subject to fire regulations
for non structural elements in internal or external applications
chimneys
for use in a glazed assembly intended specifically to provide fire resistance
for roads and other civil engineering works
for concrete, mortar and grout
as internal finishes in walls or ceilings subject to reaction to fire regulations
for other uses in buildings and civil engineering works
for internal uses
as internal or external finishes in walls or ceilings subject to reaction to fire regulations
in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal
for structural elements in internal or external application
as external walls subject to reaction to fire requirements
in external wall subject to fire regulations
for uses subject to regulations on reaction to fire
for use as anti-bullet, or anti-explosion glazing
for external walls and roofs
preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products
in buildings
fire/smoke compartmentation and on escape routes
bridges, railtracks and buildings
for structural use
in buildings, roads and other civil engineering work
for roof waterproofing
for structural elements in internal or external applications
fire safety
for hydraulic structures and other civil engineering works
in walls, columns and partitions
for uses subject to reaction to fire regulations
as internal or external finishes in ceilings subject to reaction to fire regulations
for uses subject to reaction to fire requirements

Standards

Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
Aggregates for concrete
Aggregates for mortar
Aggregates for railway ballast
Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
Armourstone - Part 1: Specification
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements
Building hardware - Controlled door closing devices - Requirement and test methods
Building hardware - Door coordinator devices - Requirements and test methods
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods
Building hardware - Single-axis hinges - Requirements and tests methods
Building lime - Part 1: Definitions, specifications and conformity criteria
Calcium aluminate cement - Composition, specifications and conformity criteria
Cement - Composition, specifications and conformity criteria for very low heat special cements
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements
Chimneys - Clay/ceramic flue liners - Requirements and test methods
Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
Chimneys - Components - Concrete flue blocks
Chimneys - Components - Concrete flue liners
Chimneys - Components - Concrete outer wall elements
Chimneys - Requirements for metal chimneys - Part 1: System chimney products
Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes
Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance
Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions
Chimneys - System chimneys with plastic flue liners - Requirements and test methods
Curtain walling - Product standard
EN 1096-4:2004
EN 1125:1997/A1:2001
EN 1154:1996/A1:2002
EN 1155:1997/A1:2002
EN 1158:1997/A1:2002
EN 1168:2005
EN 12094-10:2003
EN 12094-11:2003
EN 12094-12:2003
EN 12094-13:2001
EN 12094-1:2003
EN 12094-2:2003
EN 12094-3:2003
EN 12094-4:2004
EN 12094-5:2000
EN 12094-6:2000
EN 12094-7:2000
EN 12094-7:2000/A1:2005
EN 12094-9:2003
EN 12150-2:2004
EN 12209:2003
EN 12259-1:1999 + A1:2001
EN 12259-1:1999+A1:01/A2:04
EN 12259-2:1999/A1:2001
EN 12259-3:2000/A1:2001
EN 12259-4:2000/A1:2001
EN 12259-5:2002
EN 12337-2:2004
EN 12416-1:2001
EN 12416-1:2001/A1:2004
EN 12416-2:2001
EN 12446:2003
EN 12620:2002
EN 1279-5:2005
EN 12794:2005
EN 12843:2004
EN 12878:2005
EN 13024-2:2004
EN 13043:2002
EN 13055-1:2002
EN 13055-2:2004
EN 13063-1:2005
EN 13063-2:2005
EN 13069:2005
EN 13084-5:2005
EN 13084-7:2005
EN 13139:2002
EN 13162:2001
EN 13163:2001
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13170:2001
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13224:2004
EN 13225:2004
EN 13242:2002
EN 13249:2000
EN 13249:2000/A1:2005
EN 13250:2000
EN 13251:2000
EN 13252:2000
EN 13253:2000
EN 13254:2000
EN 13255:2000
EN 13256:2000
EN 13257:2000
EN 13263-1:2005
EN 13265:2000
EN 13361:2004
EN 13362:2005
EN 13383-1:2002
EN 13450:2002
EN 13454-1:2004
EN 13491:2004
EN 13492:2004
EN 13493:2005
EN 13693:2004
EN 13707:2004
EN 13747:2005
EN 13813:2002
EN 13830:2003
EN 13859-1:2005
EN 13956:2005
EN 13964:2004
EN 13967:2004
EN 13969:2004
EN 13970:2004
EN 13978-1:2005
EN 13984:2004
EN 13986:2004
EN 14041:2004
EN 14063-1:2004
EN 14080:2005
EN 14081-1:2005
EN 14178-2:2004
EN 14179-2:2005
EN 14216:2004
EN 14250:2004
EN 14321-2:2005
EN 14339:2005
EN 14374:2004
EN 14384:2005
EN 14449:2005
EN 14471:2005
EN 1457:1999/A1:2002
EN 14647:2005
EN 14716:2004
EN 1504-2:2004
EN 1504-3:2005
EN 1504-4:2004
EN 1504-5:2004
EN 1520:2002
EN 1748-1-2:2004
EN 1748-2-2:2004
EN 179:1997/A1:2001
EN 1856-1:2003
EN 1856-2:2004
EN 1857:2003
EN 1858:2003
EN 1863-2:2004
EN 1873:2005
EN 1935:2002
EN 197-1:2000
EN 197-1:2000/ A1:2004
EN 197-4:2004
EN 413-1:2004
EN 438-7:2005
EN 450-1:2005
EN 459-1:2001
EN 572-9:2004
EN 671-1:2001
EN 671-2: 2001
EN 771-1:2003
EN 771-1:2003/A1:2005
EN 771-2:2003
EN 771-2:2003/A1:2005
EN 771-3:2003
EN 771-3:2003/A1:2005
EN 771-4:2003
EN 771-4:2003/A1:2005
EN 771-5:2003
EN 771-5:2003/A1:2005
EN 771-6:2005
EN 934-2:2001
EN 934-2:2001/A1:2004
EN 934-3:2003
EN 934-4:2001
EN 998-2:2003
Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches
Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves
Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators
Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems
Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices for CO2 systems
Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO2 systems
Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO2 systems
Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors
Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components
Fixed firefighting systems - Powder systems - Part 2: Design, construction and maintenance
Fixed firefighting systems - Powder systems- Part 1: Requirements and test methods for components
Fixed firefighting systems components for sprinkler and waterspray systems - Part 1:Sprinklers
Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
Free-standing chimneys - Part 5: Material for brick liners - Product specifications
Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
Geosynthetic Barriers - Characteristics required for use in the construction of canals
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
Geotextiles and geotextile-related products -Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion )
Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Insulating glass units - Part 5: Evaluation of conformity
Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
Masonry cement - Part 1: Composition, specifications and conformity criteria
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
Pillar fire hydrants
Precast concrete products - Floor plates for floor systems
Precast concrete products - Foundation piles
Precast concrete products - Hollow core slabs
Precast concrete products - Linear structural elements
Precast concrete products - Masts and poles
Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
Precast concrete products - Ribbed floor elements
Precast concrete products - Special roof elements
Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods
Prefabricated reinforced components of lightweight aggregate concrete with open structure
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
Required characteristics for geotextiles and geotextile-related products used in the construction of railways
Resilient, textile and laminate floor coverings - Essential characteristics
Screed material and floor screeds - Screed materials - Properties and requirements
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 2: Calcium silicate masonry units
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 5: Manufactured stone masonry units
Specification for masonry units - Part 5: Manufactured stone masonry units
Specification for masonry units - Part 6: Natural stone masonry units
Specification for mortar for masonry - Part 2: Masonry mortar
Stretched ceilings - Requirements and test methods
Suspended ceilings - Requirements and test methods
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Timber structures - Glued laminated timber - Requirements
Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
Timber structures - Structural laminated veneer lumber - Requirements
Underground fire hydrants
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=0988

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.