SINTEF AS by its institute SINTEF Community

🇳🇴 Norway · OSLO Active

www.sintefcertification.no/

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active

Designated since2006-09-21

Full scope text from the register

Product families

Masonry and related products (1/3)
Masonry and related products (2/3)
Internal partition kits (1/5)
Internal partition kits (2/5)
Internal partition kits (3/5)
Internal partition kits (4/5)
Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1)
Post-tensioning kits for the prestressing of structures (1/1)
Aggregates for uses with high safety requirements (2/2)
Liquid applied roof waterproofing kits (1/3)
Self-supporting translucent roof kits (except glass-based kits) (1/3)
Self-supporting translucent roof kits (except glass-based kits) (2/3)
Self-supporting translucent roof kits (except glass-based kits) (3/3)
Thermal insulating products (1/2)
Thermal insulating products (2/2)
Gypsum products (2/4)
Gypsum products (3/4)
Structural sealant glazing kits of types (curtain walling)
Metal anchors for use in concrete (mechanical fasteners)
Metal anchors for use in concrete for fixing lightweight systems (1/1)
Metal injection anchors for use in masonry (1/1)
Plastic anchors for use in concrete and masonry (1/1)
Cements, building limes and other hydraulic binders
External thermal insulation composite systems/kits with rendering (ETICS)(1/1)
Fasteners for structural timber products (1/1)
Systems of mechanically fastened flexible roof waterproofing membranes (1/1)
Roof coverings, rooflights, roof windows and ancillary products (2/6)
Roof coverings, rooflights, roof windows and ancillary products (3/6)
Roof coverings, rooflights, roof windows and ancillary products (5/6)
Internal and external wall and ceiling finishes (4/5)
Timber frame and log prefabricated building kits (1/1)
Products related to concrete, mortar and grout (1/2)
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (1/6)
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (2/6)
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (3/6)
Structural timber products (1/3)
Wood-based panels (1/2)
Wood-based panels (2/2)
Waste water engineering products inside buildings (2/2)
Waste water engineering products outside buildings (1/3)
Floorings (2/2)
Pipes, tanks and ancillaries not in contact with water intended for human consumption (1/5)
Light composite wood-based beams and columns (1/1)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Membranes (2/3)
Curtain wallings (1/1)

Functions

Inspection Body
Testing Laboratory
Product Certification Body
FPC Certification Body

Intended use

in buildings, roads and other civil engineering work
for use in systems, such as facade systems, for fixing or supporting elements which contribute to the stability of the systems
for internal uses including enclosed public transport premises
in buildings
for structural timber products
for the prestressing of structures
for the construction of external and internal walls not subject to fire regulations, in buildings
for external walls and roofs
for concrete, mortar and grout
for use in reduntant systems for fixing and/or supporting to concrete elements such as lightweight suspended ceilings, as well as installations
for non structural elements in internal or external applications
for structural elements in internal or external applications
in external wall subject to fire regulations
any
for uses subject to external fire performance regulations
in building works
for use inside building
for external uses
for railway works
for uses liable to present "safety-in-use" risks and subject to such regulations
for use in roofs and roof finishes
as external walls subject to reaction to fire requirements
as external walls not subject to reaction to fire requirements
fixing and/or supporting to masonry, structural elements (which contribute to the stability of the works) or heavy units such as claddings as well as installations
preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products
for structural elements in internal or external application
for roads and other civil engineering works
for all roof waterproofing uses
in walls, columns and partitions
fire/smoke compartmentation and on escape routes
in installations for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building
for stiffening timber-framed windload bearing walls or timber roof struss structures
for hydraulic structures and other civil engineering works
for the construction of external and internal walls subject to fire regulations, in buildings
as internal or external finishes in walls or ceilings, as relevant, subject to regulations on dangerous substances
for uses subject to regulations on reaction to fire
for uses subject to resistance to fire regulations (eg fire compartmentation)
for uses with low performance requirements in buildings and civil engineering works
in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings
for fixing and/or supporting concrete structural elements or heavy units such as cladding and suspended ceilings
for uses subject to reaction to fire regulations
for fire compartmentation
for uses contributing to stiffening the structure
for roof waterproofing
in external wall not subject to fire regulations
for uses subject to reaction to fire requirements
for internal uses
for uses subject to regulations on dangerous substances
in walls and partitions
bridges, railtracks and buildings
for other uses in buildings and civil engineering works
to be used outside buildings, for rain water, faecal and organic effluents

Standards

Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
Aggregates for concrete
Aggregates for mortar
Aggregates for railway ballast
Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
Armourstone - Part 1: Specification
Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements
Building hardware - Controlled door closing devices - Requirement and test methods
Building hardware - Door coordinator devices - Requirements and test methods
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods
Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods
Building hardware - Single-axis hinges - Requirements and tests methods
Building lime - Part 1: Definitions, specifications and conformity criteria
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Ceramic tiles - Definitions, classification, characteristics and marking (ISO 13006:1998, modified)
Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
Curtain walling - Product standard
EN 1125:1997/A1:2001
EN 1154:1996/A1:2002
EN 1155:1997/A1:2002
EN 1158:1997/A1:2002
EN 12050-1:2001
EN 12050-2:2000
EN 12050-3:2000
EN 12050-4:2000
EN 12057:2004
EN 12058:2004
EN 12326-1:2014
EN 12566-1:2000/A1:2003
EN 12620:2002
EN 12859:2001
EN 12860:2001
EN 13043:2002
EN 13055-1:2002
EN 13139:2002
EN 13162:2001
EN 13163:2001
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13170:2001
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13242:2002
EN 13383-1:2002
EN 13450:2002
EN 13454-1:2004
EN 13707:2004
EN 13813:2002
EN 13830:2003
EN 13859-2:2004
EN 13967:2004
EN 13969:2004
EN 13970:2004
EN 13984:2004
EN 13986:2004
EN 14016-1:2004
EN 14041:2004
EN 14041:2004/AC:2006
EN 14250:2004
EN 14374:2004
EN 14411:2003
EN 1469:2004
EN 1504-2:2004
EN 1504-4:2004
EN 1504-5:2004
EN 179:1997/A1:2001
EN 1935:2002
EN 197-1:2000
EN 197-1:2000/ A1:2004
EN 459-1:2001
EN 490:2004
EN 520:2004
EN 682:2002
EN 771-1:2003
EN 771-1:2003/A1:2005
EN 771-2:2003
EN 771-2:2003/A1:2005
EN 771-3:2003
EN 771-3:2003/A1:2005
EN 771-4:2003
EN 771-4:2003/A1:2005
EN 845-1:2003
EN 845-2:2003
EN 845-3:2003
EN 934-2:2001
EN 934-2:2001/A1:2004
EN 934-3:2003
EN 934-4:2001
EN 998-2:2003
Elastomeric Seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum plasterboards - Definitions, requirements and test methods
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
Natural stone products - Modular tiles - Requirements
Natural stone products - Slabs for cladding - Requirements
Natural stone products - Slabs for floors and stairs - Requirements
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
Resilient, textile and laminate floor coverings - Essential characteristics
Resilient, textile and laminate floor coverings - Essential characteristics
Screed material and floor screeds - Screed materials - Properties and requirements
Slate and stone products for discontinuous roofing and cladding - Part 1: Product specification
Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks
Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets
Specification for ancillary components for masonry - Part 2: Lintels
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 2: Calcium silicate masonry units
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for mortar for masonry - Part 2: Masonry mortar
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
Timber structures - Structural laminated veneer lumber - Requirements
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4 : Non-return valves for faecal-free wastewater and wastewater containing faecal matter
Wastewater lifting plants for buildings and sites- Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=1071

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.