BUILDWISE - CENTRE SCIENTIFIQUE ET TECHNIQUE DE LA CONSTRUCTION (CSTC) - WETENSCHAPPELIJK EN TECHNISCH CENTRUM VOOR HET BOUWBEDRIJF (WTCB) - BELGIAN BUILDING RESEARCH INSTITUTE (BBRI)

🇧🇪 Belgium · ZAVENTEM Active

www.buildwise.be

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active

Designated since2006-04-09

Full scope text from the register

Product families

Thermal insulating products (2/2)
Circulation fixtures (2/2)
Curtain wallings (1/1)
Waste water engineering products inside buildings (2/2)
Waste water engineering products outside buildings (2/3)
Masonry and related products (2/3)
Floorings (2/2)
Internal and external wall and ceiling finishes (2/5)
Internal and external wall and ceiling finishes (3/5)
Internal and external wall and ceiling finishes (4/5)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Construction adhesives (1/2)
Pipes, tanks and ancillaries not in contact with water intended for human consumption (1/5)
Structural sealant glazing kits of types (curtain walling)
Metal anchors for use in concrete (mechanical fasteners)
Liquid applied roof waterproofing kits (3/3)
Self-supporting translucent roof kits (except glass-based kits) (1/3)
Light composite wood-based beams and columns (1/1)
Fire stopping, fire sealing and fire protection products (1/2)
Timber frame and log prefabricated building kits (1/1)
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (1/6)
Internal partition kits (4/5)
Flat glass, profiled glass and glass-block products (4/6)
Flat glass, profiled glass and glass-block products (5/6)

Functions

Testing Laboratory

Intended use

as internal or external finishes in ceilings subject to reaction to fire regulations
in walls and partitions
in buildings
for use in roofs and roof finishes
for external walls and roofs
in building works
for use inside building
for use as anti-bullet, or anti-explosion glazing
other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use (i.e. NOT for fire/smoke compartmentation, NOT for escape routes)
as external walls subject to reaction to fire requirements
for internal uses including enclosed public transport premises
for external uses
as internal or external finishes in walls or ceilings subject to regulations on dangerous substances
for other uses liable to present "safety-in-use" risks and subject to such regulations
for uses contributing to stiffening the structure
as external walls not subject to reaction to fire requirements
for internal uses
fire/smoke compartmentation and on escape routes
in installations for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building
for uses relating to energy conservation and/or noise reduction
for circulation areas
for uses contributing to the load-bearing capacity of the structure
for fixing and/or supporting concrete structural elements or heavy units such as cladding and suspended ceilings
for uses subject to regulations on reaction to fire
for uses subject to reaction to fire regulations
for internal and external uses in buildings and other civil engineering works
to be used outside buildings, for waste water from buildings and civil engineering works including roads
for fire compartmentation and/or fire protection or fire performance
for uses liable to present "safety-in-use" risks and subject to such regulations
as internal or external finish in ceilings subject to safety in use requirements

Standards

Adhesives for tiles - Definitions and specifications
Anti-glare screens for roads - Part 1: Performance and characteristics
Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements
Building hardware - Controlled door closing devices - Requirement and test methods
Building hardware - Door coordinator devices - Requirements and test methods
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods
Building hardware - Single-axis hinges - Requirements and tests methods
Ceramic tiles - Definitions, classification, characteristics and marking (ISO 13006:1998, modified)
Curtain walling - Product standard
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
EN 1096-4:2004
EN 1125:1997/A1:2001
EN 1154:1996/A1:2002
EN 1155:1997/A1:2002
EN 1158:1997/A1:2002
EN 12004:2001/A1:2002
EN 12050-1:2001
EN 12050-2:2000
EN 12050-3:2000
EN 12050-4:2000
EN 12150-2:2004
EN 12209:2003
EN 12337-2:2004
EN 12676-1:2000/A1:2003
EN 13024-2:2004
EN 13160-1:2003
EN 13162:2001
EN 13163:2001
EN 13164:2001
EN 13165:2001
EN 13166:2001
EN 13167:2001
EN 13168:2001
EN 13169:2001
EN 13170:2001
EN 13171:2001
EN 13241-1:2003
EN 13813:2002
EN 13830:2003
EN 13964:2004
EN 14016-1:2004
EN 14178-2:2004
EN 1433:2002
EN 14411:2003
EN 1748-1-2:2004
EN 1748-2-2:2004
EN 179:1997/A1:2001
EN 1863-2:2004
EN 1935:2002
EN 572-9:2004
EN 682:2002
EN 845-1:2003
EN 845-2:2003
EN 845-3:2003
Elastomeric Seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics
Leak detection systems Part 1: General Principles
Screed material and floor screeds - Screed materials - Properties and requirements
Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets
Specification for ancillary components for masonry - Part 2: Lintels
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
Suspended ceilings - Requirements and test methods
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4 : Non-return valves for faecal-free wastewater and wastewater containing faecal matter
Wastewater lifting plants for buildings and sites- Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=1136

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.