Magistratsabteilung 39 - Prüf-, Überwachungs- und Zertifizierungsstelle der Stadt Wien

🇦🇹 Austria · Wien Active

www.ma39.wien.gv.at

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active

Designated since2006-11-30

Full scope text from the register

Product families

Products related to concrete, mortar and grout (1/2)
Masonry and related products (1/3)
Masonry and related products (2/3)
Floorings (2/2)
Aggregates for uses with high safety requirements (2/2)
Construction adhesives (1/2)
Waste water engineering products inside buildings (2/2)
Internal and external wall and ceiling finishes (1/5)
Internal and external wall and ceiling finishes (2/5)
Internal and external wall and ceiling finishes (3/5)
Internal and external wall and ceiling finishes (4/5)
Cements, building limes and other hydraulic binders
Gypsum products (2/4)
Gypsum products (3/4)
External thermal insulation composite systems/kits with rendering (ETICS)(1/1)
Thermal insulating products (1/2)
Thermal insulating products (2/2)
Curtain wallings (1/1)
Roof coverings, rooflights, roof windows and ancillary products (2/6)
Roof coverings, rooflights, roof windows and ancillary products (3/6)
Membranes (1/3)
Membranes (2/3)
Membranes (3/3)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Flat glass, profiled glass and glass-block products (1/6)
Flat glass, profiled glass and glass-block products (2/6)
Flat glass, profiled glass and glass-block products (3/6)
Flat glass, profiled glass and glass-block products (5/6)

Functions

Testing Laboratory
Inspection Body

Intended use

in walls, columns and partitions
for use inside building
for railway works
in external wall not subject to fire regulations
as internal or external finishes in ceilings subject to reaction to fire regulations
for use in a glazed assembly intended specifically to provide fire resistance
for concrete, mortar and grout
other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use (i.e. NOT for fire/smoke compartmentation, NOT for escape routes)
in external wall subject to fire regulations
in buildings
for uses subject to regulations on reaction to fire
as external walls subject to reaction to fire requirements
in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings
as external walls not subject to reaction to fire requirements
any
for uses relating to energy conservation and/or noise reduction
for uses subject to reaction to fire regulations
as internal or external finish in ceilings subject to safety in use requirements
for stiffening timber-framed windload bearing walls or timber roof struss structures
in buildings, roads and other civil engineering work
for hydraulic structures and other civil engineering works
preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products
as internal or external finishes in walls or ceilings subject to regulations on dangerous substances
as internal or external finishes used for fire protection of ceilings
in walls and partitions
for internal and external uses in buildings and other civil engineering works
for internal uses
for uses subject to external fire performance regulations
for roads and other civil engineering works

Standards

Adhesives for tiles - Definitions and specifications
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
Aggregates for concrete
Aggregates for mortar
Aggregates for railway ballast
Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
Armourstone - Part 1: Specification
Building lime - Part 1: Definitions, specifications and conformity criteria
Cement - Composition, specifications and conformity criteria for very low heat special cements
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements
Clay roofing tiles and fittings - Product definitions and specifications
Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
Curtain walling - Product standard
EN 1096-4:2004
EN 12004:2001/A1:2002
EN 12050-1:2001
EN 12150-2:2004
EN 12620:2002
EN 12859:2001
EN 12859:2001/A1:2004
EN 12860:2001
EN 13043:2002
EN 1304:2005
EN 13055-1:2002
EN 13055-2:2004
EN 13139:2002
EN 13162:2001
EN 13162:2001/AC:2005
EN 13162:2001/AC:2005 - Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
EN 13163:2001
EN 13163:2001/AC:2005
EN 13163:2001/AC:2005 - Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13164:2001/AC:2005
EN 13164:2001/AC:2005 - Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13165:2001/A2:2004
EN 13165:2001/AC:2005
EN 13165:2001/AC:2005 - Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13166:2001/AC:2005
EN 13166:2001/AC:2005 - Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13167:2001/AC:2005
EN 13167:2001/AC:2005 - Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13168:2001/AC:2005
EN 13168:2001/AC:2005 - Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13169:2001/AC:2005
EN 13169:2001/AC:2005 - Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
EN 13170:2001
EN 13170:2001/AC:2005
EN 13170:2001/AC:2005 - Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13171:2001/AC:2005
EN 13171:2001/AC:2005 - Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
EN 13241-1:2003
EN 13242:2002
EN 13383-1:2002
EN 13450:2002
EN 13707:2004
EN 13813:2002
EN 13830:2003
EN 13859-1:2005
EN 13956:2005
EN 13964:2004
EN 13967:2004
EN 13969:2004
EN 13970:2004
EN 13984:2004
EN 14179-2:2005
EN 14216:2004
EN 14449:2005
EN 1863-2:2004
EN 197-1:2000
EN 197-1:2000/ A1:2004
EN 197-4:2004
EN 413-1:2004
EN 459-1:2001
EN 490:2004
EN 492:2004
EN 492:2004/A1:2005
EN 494:2004
EN 494:2004/A1:2005
EN 520:2004
EN 572-9:2004
EN 771-1:2003
EN 771-1:2003/A1:2005
EN 771-3:2003
EN 771-3:2003/A1:2005
EN 771-4:2003
EN 771-4:2003/A1:2005
EN 771-5:2003
EN 771-5:2003/A1:2005
EN 845-2:2003
EN 934-2:2001
EN 934-4:2001
EN 998-2:2003
Fibre-cement profiled sheets and fittings - Product specification and test methods
Fibre-cement profiled sheets and fittings - Product specification and test methods
Fibre-cement slates and fittings - Product specification and test methods
Fibre-cement slates and fittings - Product specification and test methods
Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum plasterboards - Definitions, requirements and test methods
Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
Masonry cement - Part 1: Composition, specifications and conformity criteria
Screed material and floor screeds - Screed materials - Properties and requirements
Specification for ancillary components for masonry - Part 2: Lintels
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 5: Manufactured stone masonry units
Specification for masonry units - Part 5: Manufactured stone masonry units
Specification for mortar for masonry - Part 2: Masonry mortar
Suspended ceilings - Requirements and test methods
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Wastewater lifting plants for buildings and sites- Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=1140

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.