Efectis Nederland BV (/Centrum voor Brandveiligheid)

🇳🇱 Netherlands · BLEISWIJK Withdrawn

www.efectis.com

Designations

CPR Construction products · Regulation (EU) No 305/2011 Withdrawn

Designated since2006-04-09

Full scope text from the register

Product families

Gypsum products (2/4)
Structural sealant glazing kits of types (curtain walling)
External thermal insulation composite systems/kits with rendering (ETICS)(1/1)
Masonry and related products (2/3)
Internal partition kits (1/5)
Internal partition kits (2/5)
Internal partition kits (3/5)
Internal partition kits (4/5)
Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1)
Self-supporting translucent roof kits (except glass-based kits) (1/3)
Self-supporting translucent roof kits (except glass-based kits) (2/3)
Self-supporting translucent roof kits (except glass-based kits) (3/3)
Thermal insulating products (2/2)
Light composite wood-based beams and columns (1/1)
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Fire stopping, fire sealing and fire protection products (1/2)
Timber frame and log prefabricated building kits (1/1)
Flat glass, profiled glass and glass-block products (1/6)
Flat glass, profiled glass and glass-block products (2/6)

Functions

Testing Laboratory

Intended use

fire safety
for uses subject to regulations on reaction to fire
for external walls and roofs
in building works
in external wall subject to fire regulations
for use in a glazed assembly intended specifically to provide fire resistance
for fire compartmentation
in walls and partitions
fire/smoke compartmentation and on escape routes
for uses subject to external fire performance regulations
for use in roofs and roof finishes
for uses subject to reaction to fire requirements
for the construction of external and internal walls subject to fire regulations, in buildings
in external wall not subject to fire regulations
for fire compartmentation and/or fire protection or fire performance
for uses subject to regulations on dangerous substances
in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings
in buildings
for uses liable to present "safety-in-use" risks and subject to such regulations
for uses subject to reaction to fire regulations

Standards

Building hardware - Controlled door closing devices - Requirement and test methods
Building hardware - Door coordinator devices - Requirements and test methods
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods
Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods
Building hardware - Single-axis hinges - Requirements and tests methods
EN 1096-4:2004
EN 1125:1997/A1:2001
EN 1154:1996/A1:2002
EN 1155:1997/A1:2002
EN 1158:1997/A1:2002
EN 12101-2:2003
EN 12150-2:2004
EN 12337-2:2004
EN 12859:2001
EN 12859:2001/A1:2004
EN 12860:2001
EN 13024-2:2004
EN 13162:2001
EN 13163:2001
EN 13164:2001
EN 13165:2001
EN 13166:2001
EN 13167:2001
EN 13168:2001
EN 13169:2001
EN 13170:2001
EN 13171:2001
EN 14178-2:2004
EN 1748-1-2:2004
EN 1748-2-2:2004
EN 179:1997/A1:2001
EN 1863-2:2004
EN 1935:2002
EN 520:2004
EN 572-9:2004
EN 845-1:2003
EN 845-2:2003
EN 845-3:2003
Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum plasterboards - Definitions, requirements and test methods
Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators
Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets
Specification for ancillary components for masonry - Part 2: Lintels
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=1234

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.