DANISH TECHNOLOGICAL INSTITUTE

🇩🇰 Denmark · TAASTRUP Active

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active

Designated since2006-04-09

Full scope text from the register

Product families

Wood-based panels (1/2)
Wood-based panels (2/2)
Cements, building limes and other hydraulic binders
Thermal insulating products (2/2)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Space heating appliances (1/2)
Structural timber products (1/3)
Internal and external wall and ceiling finishes (4/5)
Prefabricated stair kits (1/2)
Timber frame and log prefabricated building kits (1/1)
Gypsum products (3/4)

Functions

Testing Laboratory

Intended use

bridges, railtracks and buildings
for non structural elements in internal or external applications
preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products
in building works
for stiffening timber-framed windload bearing walls or timber roof struss structures
for structural elements in internal or external application
in buildings
for uses subject to regulations on reaction to fire
as internal or external finishes in walls or ceilings subject to regulations on dangerous substances
other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use (i.e. NOT for fire/smoke compartmentation, NOT for escape routes)
for dwellings and other buildings

Standards

Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 12809:2001
EN 12809:2001/A1:2004
EN 12815:2001
EN 12815:2001/A1:2004
EN 12815:2001/A1:2004 Residential cookers fired by solid fuel - Requirements and test methods
EN 13162:2001
EN 13163:2001
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13170:2001
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13229:2001
EN 13229:2001/A2:2004
EN 13229:2001/A2:2004 Inset appliances including open fires fired by solid fuels - Requirements and test methods
EN 13240:2001
EN 13240:2001/A2:2004
EN 13240:2001/A2:2004 Room heaters fired by solid fuel - Requirements and test methods
EN 13241-1:2003
EN 13964:2004
EN 13986:2004
EN 14374:2004
EN 197-1:2000/ A1:2004
EN 442-1:1995/ A1:2003
EN 520:2004
Gypsum plasterboards - Definitions, requirements and test methods
Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics
Inset appliances including open fires fired by solid fuels - Requirements and test methods
Radiators and convectors - Part 1: Technical specifications and requirements
Residential cookers fired by solid fuel - Requirements and test methods
Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
Room heaters fired by solid fuel - Requirements and test methods
Suspended ceilings - Requirements and test methods
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Timber structures - Structural laminated veneer lumber - Requirements
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=1235

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.