Warringtonfire Testing and Certification Limited, trading as Warringtonfire

🇬🇧 United Kingdom · 4ND HIGH WYCOMBE Active

www.element.com

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active

Designated since2006-04-09

Full scope text from the register

Product families

Gypsum products (2/4)
Curtain wallings (1/1)
Structural sealant glazing kits of types (curtain walling)
Structural timber products (1/3)
Wood-based panels (1/2)
Wood-based panels (2/2)
Waste water engineering products inside buildings (2/2)
Waste water engineering products outside buildings (1/3)
Waste water engineering products outside buildings (2/3)
External thermal insulation composite systems/kits with rendering (ETICS)(1/1)
Masonry and related products (2/3)
Floorings (2/2)
Internal partition kits (1/5)
Internal partition kits (2/5)
Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1)
Roof coverings, rooflights, roof windows and ancillary products (2/6)
Internal and external wall and ceiling finishes (1/5)
Internal and external wall and ceiling finishes (3/5)
Liquid applied roof waterproofing kits (3/3)
Self-supporting translucent roof kits (except glass-based kits) (3/3)
Prefabricated stair kits (1/2)
Prefabricated stair kits (2/2)
Membranes (2/3)
Thermal insulating products (2/2)
Light composite wood-based beams and columns (1/1)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Precast normal/lightweight/autoclaved aerated concrete products (1/1)
Fire stopping, fire sealing and fire protection products (1/2)
Fire stopping, fire sealing and fire protective products (2/2)
Timber frame and log prefabricated building kits (1/1)
Products related to concrete, mortar and grout (2/2)
Space heating appliances (2/2)
Flat glass, profiled glass and glass-block products (1/6)
Flat glass, profiled glass and glass-block products (2/6)
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (2/6)
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (3/6)

Functions

Testing Laboratory

Intended use

for external uses
for the construction of external and internal walls not subject to fire regulations, in buildings
for the construction of external and internal walls subject to fire regulations, in buildings
for internal uses including enclosed public transport premises
for dwellings and other buildings
for use inside building
as internal or external finishes in ceilings subject to reaction to fire regulations
fire/smoke compartmentation and on escape routes
in external wall not subject to fire regulations
for non structural elements in internal or external applications
as internal or external finishes in walls or ceilings subject to reaction to fire regulations
in buildings
as internal finishes in walls or ceilings subject to reaction to fire regulations
for uses subject to regulations on reaction to fire
for uses subject to resistance to fire regulations (eg fire compartmentation)
for structural use
to be used outside buildings, for waste water from buildings and civil engineering works including roads
for use in a glazed assembly intended specifically to provide fire resistance
for fire compartmentation
as internal or external finishes used for fire protection of ceilings
as external walls subject to reaction to fire requirements
for structural elements in internal or external applications
for non-structural use or light structural use
in walls and partitions
in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings
for internal uses
for uses subject to reaction to fire regulations
for fire compartmentation and/or fire protection or fire performance
bridges, railtracks and buildings
in building works
as external walls not subject to reaction to fire requirements
in external wall subject to fire regulations
for structural elements in internal or external application
as external finishes in walls or ceilings subject to reaction to fire regulations
as internal or external finishes, as complete elements, used for fire protection of walls or ceilings
for external walls and roofs
to be used outside buildings, for rain water, faecal and organic effluents
for uses subject to reaction to fire requirements

Standards

Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements
Building hardware - Controlled door closing devices - Requirement and test methods
Building hardware - Door coordinator devices - Requirements and test methods
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods
Building hardware - Single-axis hinges - Requirements and tests methods
Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
Curtain walling - Product standard
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
EN 1096-4:2004
EN 1125:1997/A1:2001
EN 1154:1996/A1:2002
EN 1155:1997/A1:2002
EN 1158:1997/A1:2002
EN 12050-1:2001
EN 12050-2:2000
EN 12050-3:2000
EN 12050-4:2000
EN 12057:2004
EN 12058:2004
EN 12150-2:2004
EN 12209:2003
EN 12337-2:2004
EN 12859:2001
EN 12859:2001/A1:2004
EN 12860:2001
EN 13024-2:2004
EN 13101:2002
EN 13162:2001
EN 13163:2001
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13170:2001
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13224:2004
EN 13225:2004
EN 13454-1:2004
EN 13707:2004
EN 13813:2002
EN 13830:2003
EN 13859-2:2004
EN 13964:2004
EN 13967:2004
EN 13969:2004
EN 13970:2004
EN 13984:2004
EN 13986:2004
EN 14016-1:2004
EN 14041:2004
EN 14178-2:2004
EN 1433:2002
EN 14374:2004
EN 1469:2004
EN 14716:2004
EN 1504-2:2004
EN 1504-4:2004
EN 1520:2002
EN 1748-1-2:2004
EN 1748-2-2:2004
EN 179:1997/A1:2001
EN 1863-2:2004
EN 1935:2002
EN 438-7:2005
EN 442-1:1995/ A1:2003
EN 490:2004
EN 520:2004
EN 572-9:2004
EN 845-2:2003
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum plasterboards - Definitions, requirements and test methods
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
Natural stone products - Modular tiles - Requirements
Natural stone products - Slabs for cladding - Requirements
Natural stone products - Slabs for floors and stairs - Requirements
Precast concrete products - Linear structural elements
Precast concrete products - Ribbed floor elements
Prefabricated reinforced components of lightweight aggregate concrete with open structure
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
Radiators and convectors - Part 1: Technical specifications and requirements
Resilient, textile and laminate floor coverings - Essential characteristics
Screed material and floor screeds - Screed materials - Properties and requirements
Specification for ancillary components for masonry - Part 2: Lintels
Steps for underground man entry chambers - Reguirements, marking, testing and evaluation of conformity
Stretched ceilings - Requirements and test methods
Suspended ceilings - Requirements and test methods
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Timber structures - Structural laminated veneer lumber - Requirements
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4 : Non-return valves for faecal-free wastewater and wastewater containing faecal matter
Wastewater lifting plants for buildings and sites- Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=1314

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.