CERTIF ASSOCIAÇÃO PARA A CERTIFICAÇÃO

🇵🇹 Portugal · LARANJEIRO-ALMADA Active

www.certif.pt

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active

Designated since2006-09-29

Full scope text from the register

Product families

Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Precast normal/lightweight/autoclaved aerated concrete products (1/1)
Products related to concrete, mortar and grout (1/2)
Circulation fixtures (1/2)
Geotextiles (1/2)
Wood-based panels (1/2)
Wood-based panels (2/2)
Masonry and related products (1/3)
Aggregates for uses with high safety requirements (2/2)
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
Chimneys, flues and specific products (1/1)
Structural bearings (1/1)
Structural metallic products and ancillaries (1/4)
Structural metallic products and ancillaries (3/4)
Structural metallic products and ancillaries (4/4)

Functions

Product Certification Body
FPC Certification Body

Intended use

for railway works
for circulation areas
fire/smoke compartmentation and on escape routes
for structural elements in internal or external applications
for structural elements in internal or external application
fire safety
in walls, columns and partitions
in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal
for concrete, mortar and grout
chimneys
for hydraulic structures and other civil engineering works
for non structural elements in internal or external applications
for structural use
for uses in structural metallic works
for roads and other civil engineering works
in buildings and civil engineering works where requirements on individual bearings are critical
for non-structural use or light structural use
for circulation area
in buildings, roads and other civil engineering work
to be used in metal structures or in composite metal and concrete structures

Standards

Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
Aggregates for concrete
Aggregates for mortar
Aggregates for railway ballast
Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
Armourstone - Part 1: Specification
Building hardware - Controlled door closing devices - Requirement and test methods
Building hardware - Door coordinator devices - Requirements and test methods
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods
Building hardware - Single-axis hinges - Requirements and tests methods
Chimneys - Clay/ceramic flue liners - Requirements and test methods
Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
Chimneys - Components - Concrete flue blocks
Chimneys - Components - Concrete flue liners
Chimneys - Components - Concrete outer wall elements
Chimneys - Requirements for metal chimneys - Part 1: System chimney products
Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes
Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance
Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions
Chimneys - System chimneys with plastic flue liners - Requirements and test methods
EN 10025-1:2004
EN 1125:1997/A1:2001
EN 1154:1996/A1:2002
EN 1155:1997/A1:2002
EN 1158:1997/A1:2002
EN 12094-10:2003
EN 12094-11:2003
EN 12094-12:2003
EN 12094-13:2001
EN 12094-1:2003
EN 12094-2:2003
EN 12094-3:2003
EN 12094-4:2004
EN 12094-5:2000
EN 12094-6:2000
EN 12094-7:2000
EN 12094-9:2003
EN 12101-2:2003
EN 12101-3:2002
EN 12209:2003
EN 12259-1:1999 + A1:2001
EN 12259-1:1999+A1:01/A2:04
EN 12259-2:1999/A1:2001
EN 12259-3:2000/A1:2001
EN 12259-4:2000/A1:2001
EN 12259-5:2002
EN 12416-1:2001
EN 12416-2:2001
EN 12446:2003
EN 12620:2002
EN 13043:2002
EN 13055-1:2002
EN 13055-2:2004
EN 13063-1:2005
EN 13063-2:2005
EN 13069:2005
EN 13084-5:2005
EN 13084-7:2005
EN 13139:2002
EN 13242:2002
EN 13249:2000
EN 13250:2000
EN 13251:2000
EN 13252:2000
EN 13253:2000
EN 13254:2000
EN 13255:2000
EN 13256:2000
EN 13257:2000
EN 13265:2000
EN 1337-3:2005
EN 1337-4:2004
EN 1337-5:2005
EN 1337-6:2004
EN 1337-7:2000
EN 1337-7:2004
EN 13383-1:2002
EN 13450:2002
EN 13479:2004
EN 13565-1:2003
EN 13986:2002
EN 1423:1997/A1:2003
EN 14399-1:2005
EN 14471:2005
EN 1457:1999/A1:2002
EN 1463-1:1997/ A1:2003
EN 15088:2005
EN 1520:2002
EN 179:1997/A1:2001
EN 1856-1:2003
EN 1856-2:2004
EN 1857:2003
EN 1858:2003
EN 1935:2002
EN 40-5:2002
EN 40-6:2002
EN 40-7:2002
EN 54-12:2002
EN 54-3:2001/A1:2002
EN 54-4:1997/A1:2002
EN 54-4:1997/AC:1999
EN 54-5:2000/A1:2002
EN 54-7:2000/A1:2002
EN 671-1:2001
EN 671-2: 2001
EN 771-1:2003
EN 771-1:2003/A1:2005
EN 771-2:2003
EN 771-2:2003/A1:2005
EN 771-3:2003
EN 771-3:2003/A1:2005
EN 771-4:2003
EN 771-4:2003/A1:2005
EN 771-5:2003
EN 771-5:2003/A1:2005
EN 771-6:2005
EN 934-2:2001
EN 934-4:2001
EN 998-2:2003
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors - Line detectors using an optical beam
Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 5: Heat detectors - Point detectors
Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization
Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches
Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves
Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators
Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems
Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices for CO2 systems
Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO2 systems
Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors
Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
Fixed firefighting systems - Powder systems - Part 2: Design, construction and maintenance
Fixed firefighting systems - Powder systems- Part 1: Requirements and test methods for components
Fixed firefighting systems components for sprinkler and waterspray systems - Part 1:Sprinklers
Free-standing chimneys - Part 5: Material for brick liners - Product specifications
Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
Geotextiles and geotextile-related products -Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion )
High-strength structural bolting assemblies for preloading - Part 1: General requirements
Hot rolled products of structural steels - Part 1: General technical delivery conditions
Lighting columns - Part 5: Requirements for steel lighting columns
Lighting columns - Part 6: Requirements for aluminium lighting columns
Lighting columns -Part 7: Requirements for fibre reinforced polymer composite lighting columns
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
Prefabricated reinforced components of lightweight aggregate concrete with open structure
Required characteristics for geotextiles and geotextile-related products used in the construction of railways
Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two
Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators
Smoke and heat control systems - Part 3 : Specification for powered smoke and heat exhaust ventilators
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 2: Calcium silicate masonry units
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 5: Manufactured stone masonry units
Specification for masonry units - Part 5: Manufactured stone masonry units
Specification for masonry units - Part 6: Natural stone masonry units
Specification for mortar for masonry - Part 2: Masonry mortar
Structural bearings - Part 3: Elastomeric bearings
Structural bearings - Part 4: Roller bearings
Structural bearings - Part 5: Pot bearings
Structural bearings - Part 6: Rocker bearings
Structural bearings - Part 7: Spherical and cylindrical PTFE bearings
Structural bearings - Part 7: Spherical and cylindrical PTFE bearings
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=1328

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.