ÉMI Építésügyi Minoségellenőrző Innovációs Nonprofit Kft.

🇭🇺 Hungary · Szentendre Active

www.emi.hu

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active

Designated since2006-04-09

Full scope text from the register

Product families

Cements, building limes and other hydraulic binders
Chimneys, flues and specific products (1/1)
Gypsum products (1/4)
Floorings (2/2)
Construction adhesives (1/2)
Construction adhesives (2/2)
Thermal insulating products (1/2)
Thermal insulating products (2/2)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
Circulation fixtures (1/2)
Curtain wallings (1/1)
Geotextiles (1/2)
Structural sealant glazing kits of types (curtain walling)
Metal anchors for use in concrete for fixing lightweight systems (1/1)
Structural timber products (1/3)
Wood-based panels (1/2)
Wood-based panels (2/2)
External thermal insulation composite systems/kits with rendering (ETICS)(1/1)
Masonry and related products (1/3)
Masonry and related products (2/3)
Systems of mechanically fastened flexible roof waterproofing membranes (1/1)
Internal partition kits (1/5)
Internal partition kits (2/5)
Internal partition kits (3/5)
Internal partition kits (4/5)
Structural metallic products and ancillaries (1/4)
Structural metallic products and ancillaries (3/4)
Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1)
Roof coverings, rooflights, roof windows and ancillary products (2/6)
Roof coverings, rooflights, roof windows and ancillary products (3/6)
Internal and external wall and ceiling finishes (2/5)
Internal and external wall and ceiling finishes (3/5)
Internal and external wall and ceiling finishes (4/5)
Aggregates for uses with high safety requirements (2/2)
Prefabricated stair kits (1/2)
Membranes (1/3)
Membranes (2/3)
Light composite wood-based beams and columns (1/1)
Precast normal/lightweight/autoclaved aerated concrete products (1/1)
Timber frame and log prefabricated building kits (1/1)
Products related to concrete, mortar and grout (1/2)

Functions

Inspection Body
Testing Laboratory
FPC Certification Body
Product Certification Body

Intended use

in buildings, roads and other civil engineering work
for hydraulic structures and other civil engineering works
as external walls not subject to reaction to fire requirements
for uses in structural metallic works
for fire compartmentation
for uses subject to external fire performance regulations
for other uses in buildings and civil engineering works
for uses with low performance requirements in buildings and civil engineering works
in external wall not subject to fire regulations
for non structural elements in internal or external applications
for external uses
for railway works
for roof waterproofing
for the construction of external and internal walls subject to fire regulations, in buildings
in walls, partitions or ceilings (or lining thereof) subject to reaction to fire requirements
fire safety
in walls, columns and partitions
chimneys
as external walls subject to reaction to fire requirements
for use in reduntant systems for fixing and/or supporting to concrete elements such as lightweight suspended ceilings, as well as installations
preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products
for structural elements in internal or external applications
any
for uses subject to regulations on dangerous substances
as internal or external finishes in walls or ceilings subject to requirements against accidental injuries from cutting objects
other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use (i.e. NOT for fire/smoke compartmentation, NOT for escape routes)
for non-structural use or light structural use
for dwellings and other buildings
to be used in metal structures or in composite metal and concrete structures
for external walls and roofs
for structural elements in internal or external application
for internal uses including enclosed public transport premises
in buildings
for uses subject to regulations on reaction to fire
in building works
for uses subject to reaction to fire regulations
for circulation areas
for roads and other civil engineering works
for uses liable to present "safety-in-use" risks and subject to such regulations
as internal or external finishes in walls or ceilings, as relevant, subject to regulations on dangerous substances
bridges, railtracks and buildings
in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal
for structural use
for uses subject to reaction to fire requirements
in external wall subject to fire regulations
in internal or external suspended ceilings subject to safety in use requirements
for concrete, mortar and grout
for the construction of external and internal walls not subject to fire regulations, in buildings
for internal uses
as internal or external finishes in walls or ceilings subject to reaction to fire regulations
for internal and external uses in buildings and other civil engineering works
in walls and partitions

Standards

Adhesives for tiles - Definitions and specifications
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
Aggregates for concrete
Aggregates for mortar
Aggregates for railway ballast
Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
Armourstone - Part 1: Specification
Building lime - Part 1: Definitions, specifications and conformity criteria
Cement - Composition, specifications and conformity criteria for very low heat special cements
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements
Ceramic tiles - Definitions, classification, characteristics and marking (ISO 13006:1998, modified)
Chimneys - Clay/ceramic flue liners - Requirements and test methods
Chimneys - Components - Concrete flue blocks
Chimneys - Components - Concrete flue liners
Chimneys - Components - Concrete outer wall elements
Chimneys - Requirements for metal chimneys - Part 1: System chimney products
Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes
Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
Curtain walling - Product standard
EN 10025-1:2004
EN 12004:2001/A1:2002
EN 12101-3:2002
EN 12259-1:1999 + A1:2001
EN 12259-1:1999+A1:01/A2:04
EN 12446:2003
EN 12620:2002
EN 12843:2004
EN 12859:2001
EN 12860:2001
EN 13043:2002
EN 13055-1:2002
EN 13055-2:2004
EN 13139:2002
EN 13162:2001
EN 13163:2001
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13170:2001
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13224:2004
EN 13225:2004
EN 13241-1:2003
EN 13242:2002
EN 13249:2000
EN 13249:2000/A1:2005
EN 13250:2000
EN 13251:2000
EN 13252:2000
EN 13253:2000
EN 13254:2000
EN 13255:2000
EN 13256:2000
EN 13257:2000
EN 13265:2000
EN 13361:2004
EN 13383-1:2002
EN 13450:2002
EN 13479:2004
EN 13491:2004
EN 13492:2004
EN 13693:2004
EN 13707:2004
EN 13813:2002
EN 13830:2003
EN 13967:2004
EN 13969:2004
EN 13970:2004
EN 13984:2004
EN 13986:2004
EN 14041:2004
EN 14216:2004
EN 14250:2004
EN 14374:2004
EN 14411:2003
EN 1457:1999/A1:2002
EN 1504-2:2004
EN 1504-4:2004
EN 1504-5:2004
EN 1520:2002
EN 1856-1:2003
EN 1856-2:2004
EN 1857:2003
EN 1858:2003
EN 197-1:2000
EN 197-1:2000/ A1:2004
EN 197-4:2004
EN 40-5:2002
EN 413-1:2004
EN 459-1:2001
EN 490:2004
EN 54-12:2002
EN 54-3:2001/A1:2002
EN 54-4:1997/A1:2002
EN 54-5:2000/A1:2002
EN 54-7:2000/A1:2002
EN 771-1:2003
EN 771-1:2003/A1:2005
EN 771-2:2003
EN 771-2:2003/A1:2005
EN 771-3:2003
EN 771-3:2003/A1:2005
EN 771-4:2003
EN 771-4:2003/A1:2005
EN 771-5:2003
EN 771-5:2003/A1:2005
EN 845-2:2003
EN 934-2:2001
EN 934-2:2001/A1:2004
EN 934-3:2003
EN 934-4:2001
EN 998-2:2003
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors - Line detectors using an optical beam
Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 5: Heat detectors - Point detectors
Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers
Fixed firefighting systems components for sprinkler and waterspray systems - Part 1:Sprinklers
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
Geotextiles and geotextile-related products -Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion )
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Hot rolled products of structural steels - Part 1: General technical delivery conditions
Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics
Lighting columns - Part 5: Requirements for steel lighting columns
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
Masonry cement - Part 1: Composition, specifications and conformity criteria
Precast concrete products - Linear structural elements
Precast concrete products - Masts and poles
Precast concrete products - Ribbed floor elements
Precast concrete products - Special roof elements
Prefabricated reinforced components of lightweight aggregate concrete with open structure
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
Required characteristics for geotextiles and geotextile-related products used in the construction of railways
Resilient, textile and laminate floor coverings - Essential characteristics
Screed material and floor screeds - Screed materials - Properties and requirements
Smoke and heat control systems - Part 3 : Specification for powered smoke and heat exhaust ventilators
Specification for ancillary components for masonry - Part 2: Lintels
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 2: Calcium silicate masonry units
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 5: Manufactured stone masonry units
Specification for masonry units - Part 5: Manufactured stone masonry units
Specification for mortar for masonry - Part 2: Masonry mortar
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
Timber structures - Structural laminated veneer lumber - Requirements
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=1415

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.