Building Test Centre

🇬🇧 United Kingdom · Leicestershire, LE12 6NP Active

www.btconline.co.uk

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active

Designated since2006-11-10

Full scope text from the register

Product families

Roof coverings, rooflights, roof windows and ancillary products (1/6)
Roof coverings, rooflights, roof windows and ancillary products (2/6)
Fire stopping, fire sealing and fire protection products (1/2)
Fire stopping, fire sealing and fire protective products (2/2)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Products related to concrete, mortar and grout (2/2)
Space heating appliances (2/2)
Flat glass, profiled glass and glass-block products (1/6)
Flat glass, profiled glass and glass-block products (2/6)
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (2/6)
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (3/6)
Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1)
Prefabricated stair kits (2/2)
Curtain wallings (1/1)
Structural timber products (1/3)
Structural timber products (2/3)
Internal and external wall and ceiling finishes (1/5)
Internal and external wall and ceiling finishes (3/5)
Light composite wood-based beams and columns (1/1)
Timber frame and log prefabricated building kits (1/1)
Membranes (2/3)
Gypsum products (1/4)
Gypsum products (2/4)
Gypsum products (3/4)
Thermal insulating products (2/2)
Structural sealant glazing kits of types (curtain walling)
Wood-based panels (1/2)
Wood-based panels (2/2)
Waste water engineering products inside buildings (2/2)
Waste water engineering products outside buildings (1/3)
Waste water engineering products outside buildings (2/3)
External thermal insulation composite systems/kits with rendering (ETICS)(1/1)
Masonry and related products (2/3)
Floorings (2/2)
Internal partition kits (1/5)
Internal partition kits (2/5)
Liquid applied roof waterproofing kits (3/3)
Self-supporting translucent roof kits (except glass-based kits) (3/3)

Functions

Testing Laboratory

Intended use

for structural elements in internal or external application
as internal or external finishes in walls or ceilings subject to reaction to fire regulations
for the construction of external and internal walls subject to fire regulations, in buildings
for uses subject to regulations on reaction to fire
as internal or external finishes, as complete elements, used for fire protection of walls or ceilings
for external walls and roofs
as external walls subject to reaction to fire requirements
as internal or external finishes in ceilings subject to reaction to fire regulations
for use in a glazed assembly intended specifically to provide fire resistance
in external wall subject to fire regulations
in walls and partitions
to be used outside buildings, for rain water, faecal and organic effluents
as external finishes in walls or ceilings subject to reaction to fire regulations
for uses subject to resistance to fire regulations (e.g. fire compartmentation)
in buildings
for non structural elements in internal or external applications
for use inside building
for uses subject to reaction to fire requirements
to be used outside buildings, for waste water from buildings and civil engineering works including roads
for stiffening timber-framed windload bearing walls or timber roof struss structures
for bridges and buildings
for internal uses including enclosed public transport premises
in building works
for internal uses
for uses subject to reaction to fire regulations
for fire compartmentation and/or fire protection or fire performance
fire/smoke compartmentation and on escape routes
bridges, railtracks and buildings
as internal finishes in walls or ceilings subject to reaction to fire regulations
as internal or external finishes used for fire protection of ceilings
in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings
in walls, partitions or ceilings (or lining thereof) subject to reaction to fire requirements
for fire compartmentation
for uses subject to resistance to fire regulations (eg fire compartmentation)

Standards

Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements
Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods
Building hardware - Controlled door closing devices - Requirement and test methods
Building hardware - Door coordinator devices - Requirements and test methods
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods
Building hardware - Single-axis hinges - Requirements and tests methods
Clay roofing tiles and fittings - Product definitions and specifications
Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
Curtain walling - Product standard
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
EN 1096-4:2004
EN 1125:1997/A1:2001
EN 1154:1996/A1:2002
EN 1155:1997/A1:2002
EN 1158:1997/A1:2002
EN 12050-1:2001
EN 12050-2:2000
EN 12050-3:2000
EN 12050-4:2000
EN 12057:2004
EN 12058:2004
EN 12150-2:2004
EN 12209:2003
EN 12337-2:2004
EN 1279-5:2005
EN 12859:2001
EN 12859:2001/A1:2004
EN 12860:2001
EN 13024-2:2004
EN 1304:2005
EN 13101:2002
EN 13162:2001
EN 13163:2001
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13170:2001
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13279-1:2005
EN 13454-1:2004
EN 13707:2004
EN 13813:2002
EN 13830:2003
EN 13859-1:2005
EN 13859-2:2004
EN 13950:2005
EN 13956:2005
EN 13964:2004
EN 13967:2004
EN 13969:2004
EN 13970:2004
EN 13984:2004
EN 13986:2004
EN 14016-1:2004
EN 14041:2004
EN 14080:2005
EN 14178-2:2004
EN 14179-2:2005
EN 14190:2005
EN 14195:2005
EN 14209:2005
EN 14321-2:2005
EN 1433:2002
EN 14342:2005
EN 14374:2004
EN 14449:2005
EN 14496:2005
EN 1469:2004
EN 14716:2004
EN 1504-2:2004
EN 1504-3:2005
EN 1504-4:2004
EN 1748-1-2:2004
EN 1748-2-2:2004
EN 179:1997/A1:2001
EN 1863-2:2004
EN 1873:2005
EN 1935:2002
EN 438-7:2005
EN 442-1:1995/ A1:2003
EN 490:2004
EN 492:2004
EN 492:2004/A1:2005
EN 494:2004
EN 494:2004/A1:2005
EN 520:2004
EN 544:2005
EN 572-9:2004
EN 845-2:2003
Fibre-cement profiled sheets and fittings - Product specification and test methods
Fibre-cement profiled sheets and fittings - Product specification and test methods
Fibre-cement slates and fittings - Product specification and test methods
Fibre-cement slates and fittings - Product specification and test methods
Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Insulating glass units - Part 5: Evaluation of conformity
Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards - Definitions, requirements and test methods
Gypsum binders and gypsum plasters - Part 1: Definitions and requirements
Gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum plasterboard products from reprocessing - Definitions, requirements and test methods
Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods
Gypsum plasterboards - Definitions, requirements and test methods
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
Metal framing components for gypsum plasterboard systems - Definitions, requirements and test methods
Natural stone products - Modular tiles - Requirements
Natural stone products - Slabs for cladding - Requirements
Natural stone products - Slabs for floors and stairs - Requirements
Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods
Preformed plasterboard cornices - Definitions, requirements and test methods
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
Radiators and convectors - Part 1: Technical specifications and requirements
Resilient, textile and laminate floor coverings - Essential characteristics
Screed material and floor screeds - Screed materials - Properties and requirements
Specification for ancillary components for masonry - Part 2: Lintels
Steps for underground man entry chambers - Reguirements, marking, testing and evaluation of conformity
Stretched ceilings - Requirements and test methods
Suspended ceilings - Requirements and test methods
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Timber structures - Glued laminated timber - Requirements
Timber structures - Structural laminated veneer lumber - Requirements
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4 : Non-return valves for faecal-free wastewater and wastewater containing faecal matter
Wastewater lifting plants for buildings and sites- Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter
Wood flooring - Characteristics, evaluation of conformity and marking
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=1575

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.