BRE Global Limited incorporating BRE Testing

🇬🇧 United Kingdom · WD25 9XX Active

www.breglobal.co.uk

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active

Designated since2006-04-09

Full scope text from the register

Product families

Gypsum products (2/4)
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
Thermal insulating products (2/2)
Structural sealant glazing kits of types (curtain walling)
Wood-based panels (1/2)
Wood-based panels (2/2)
Waste water engineering products inside buildings (2/2)
Waste water engineering products outside buildings (1/3)
Waste water engineering products outside buildings (2/3)
External thermal insulation composite systems/kits with rendering (ETICS)(1/1)
Masonry and related products (2/3)
Floorings (2/2)
Internal partition kits (1/5)
Internal partition kits (2/5)
Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1)
Liquid applied roof waterproofing kits (2/3)
Liquid applied roof waterproofing kits (3/3)
Self-supporting translucent roof kits (except glass-based kits) (2/3)
Self-supporting translucent roof kits (except glass-based kits) (3/3)
Prefabricated stair kits (1/2)
Prefabricated stair kits (2/2)
Light composite wood-based beams and columns (1/1)
Timber frame and log prefabricated building kits (1/1)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)

Functions

Testing Laboratory

Intended use

for the construction of external and internal walls subject to fire regulations, in buildings
in buildings
in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings
for the construction of external and internal walls not subject to fire regulations, in buildings
for uses subject to reaction to fire requirements
fire safety
for external walls and roofs
in walls and partitions
to be used outside buildings, for rain water, faecal and organic effluents
for internal uses
to be used outside buildings, for waste water from buildings and civil engineering works including roads
for non structural elements in internal or external applications
for structural elements in internal or external application
in external wall subject to fire regulations
for external uses
in building works
for structural elements in internal or external applications
for uses subject to external fire performance regulations
for dwellings and other buildings
for use inside building
for uses subject to reaction to fire regulations
for uses subject to regulations on reaction to fire
other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use (i.e. NOT for fire/smoke compartmentation, NOT for escape routes)
for fire compartmentation

Standards

Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
EN 12050-1:2001
EN 12050-2:2000
EN 12050-3:2000
EN 12050-4:2000
EN 12094-10:2003
EN 12094-13:2001
EN 12094-4:2004
EN 12094-5:2000
EN 12094-7:2000
EN 12259-1:1999 + A1:2001
EN 12859:2001
EN 12860:2001
EN 13101:2002
EN 13162:2001
EN 13163:2001
EN 13164:2001
EN 13165:2001
EN 13166:2001
EN 13167:2001
EN 13168:2001
EN 13169:2001
EN 13170:2001
EN 13171:2001
EN 13241-1:2003
EN 13813:2002
EN 13986:2002
EN 1433:2002
EN 54-12:2002
EN 54-3:2001/A1:2002
EN 54-4:1997/A1:2002
EN 54-5:2000/A1:2002
EN 54-7:2000/A1:2002
EN 845-2:2003
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors - Line detectors using an optical beam
Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 5: Heat detectors - Point detectors
Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization
Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches
Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves
Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators
Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems
Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO2 systems
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics
Screed material and floor screeds - Screed materials - Properties and requirements
Specification for ancillary components for masonry - Part 2: Lintels
Steps for underground man entry chambers - Reguirements, marking, testing and evaluation of conformity
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4 : Non-return valves for faecal-free wastewater and wastewater containing faecal matter
Wastewater lifting plants for buildings and sites- Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=1576

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.