Institutul National de Cercetare - Dezvoltare in Constructii, Urbanism si Dezvoltare Teritoriala Durabila - URBAN-INCERC

🇷🇴 Romania · BUCHAREST Withdrawn

www.incd.ro

Designations

CPR Construction products · Regulation (EU) No 305/2011 Withdrawn

Designated since2007-01-26

Full scope text from the register

Product families

Structural timber products (2/3)
Cements, building limes and other hydraulic binders
Floorings (2/2)
Roof coverings, rooflights, roof windows and ancillary products (1/6)
Roof coverings, rooflights, roof windows and ancillary products (2/6)
Internal and external wall and ceiling finishes (3/5)
Internal and external wall and ceiling finishes (4/5)
Gypsum products (1/4)
Gypsum products (2/4)
Gypsum products (3/4)
Membranes (1/3)
Membranes (2/3)
Membranes (3/3)
Thermal insulating products (1/2)
Thermal insulating products (2/2)
Products related to concrete, mortar and grout (1/2)
Products related to concrete, mortar and grout (2/2)
Construction adhesives (1/2)
Construction adhesives (2/2)
Space heating appliances (1/2)
Space heating appliances (2/2)
Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5)
Pipes, tanks and ancillaries not in contact with water intended for human consumption (5/5)
Flat glass, profiled glass and glass-block products (1/6)
Flat glass, profiled glass and glass-block products (2/6)
Flat glass, profiled glass and glass-block products (3/6)
Flat glass, profiled glass and glass-block products (4/6)
Flat glass, profiled glass and glass-block products (5/6)

Functions

Testing Laboratory

Intended use

for uses subject to resistance to fire regulations (e.g. fire compartmentation)
for use as anti-bullet, or anti-explosion glazing
for bridges and buildings
as external finishes in walls or ceilings subject to reaction to fire regulations
in installations subject to regulations on energy conservation, used for the transport/ disposal/ storage of water not intended for human consumption, and for heating systems
in buildings
preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products
for concrete, mortar and grout
for stiffening timber-framed windload bearing walls or timber roof struss structures
in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings
in walls, partitions or ceilings (or lining thereof) subject to reaction to fire requirements
as internal or external finishes in ceilings subject to reaction to fire regulations
as internal or external finishes in walls or ceilings, as relevant, subject to regulations on dangerous substances
as internal or external finishes in walls or ceilings subject to regulations on dangerous substances
in installations in areas subject to reaction to fire regulations, used for the transport/disposal/storage of water not intended for human consumption
as internal finishes in walls or ceilings subject to reaction to fire regulations
for uses subject to reaction to fire regulations
for use in a glazed assembly intended specifically to provide fire resistance
for internal and external uses in buildings and other civil engineering works
any
for uses subject to regulations on reaction to fire
for uses relating to energy conservation and/or noise reduction
as internal or external finishes in walls or ceilings subject to reaction to fire regulations
for other uses liable to present "safety-in-use" risks and subject to such regulations
for uses subject to external fire performance regulations
for internal uses

Standards

Adhesives for tiles - Definitions and specifications
Adhesives for tiles - Definitions and specifications
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements
Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods
Calcium aluminate cement - Composition, specifications and conformity criteria
Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 1: Technical specifications and requirements
Cement - Composition, specifications and conformity criteria for very low heat special cements
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements
Clay roofing tiles and fittings - Product definitions and specifications
Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
EN 1096-4:2004
EN 12004:2001/A1:2002
EN 12004:2001/A1:2002/AC:2002
EN 12057:2004
EN 12150-2:2004
EN 12326-1:2014
EN 12337-2:2004
EN 1279-5:2005
EN 12809:2001
EN 12809:2001/A1:2004
EN 12809:2001/AC:2006
EN 12809:2001/AC:2006 - Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
EN 12815:2001
EN 12815:2001/A1:2004
EN 12815:2001/A1:2004 Residential cookers fired by solid fuel - Requirements and test methods
EN 12815:2001/AC:2006
EN 12815:2001/AC:2006 - Residential cookers fired by solid fuel - Requirements and test methods
EN 12859:2001
EN 12859:2001/A1:2004
EN 12860:2001
EN 13024-2:2004
EN 1304:2005
EN 13162:2001
EN 13162:2001/AC:2005
EN 13162:2001/AC:2005 - Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
EN 13163:2001
EN 13163:2001/AC:2005
EN 13163:2001/AC:2005 - Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
EN 13164:2001
EN 13164:2001/ A1:2004
EN 13164:2001/AC:2005
EN 13164:2001/AC:2005 - Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
EN 13165:2001
EN 13165:2001/ A1:2004
EN 13165:2001/A2:2004
EN 13165:2001/AC:2005
EN 13165:2001/AC:2005 - Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
EN 13166:2001
EN 13166:2001/ A1:2004
EN 13166:2001/AC:2005
EN 13166:2001/AC:2005 - Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
EN 13167:2001
EN 13167:2001/ A1:2004
EN 13167:2001/AC:2005
EN 13167:2001/AC:2005 - Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
EN 13168:2001
EN 13168:2001/ A1:2004
EN 13168:2001/AC:2005
EN 13168:2001/AC:2005 - Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
EN 13169:2001
EN 13169:2001/ A1:2004
EN 13169:2001/AC:2005
EN 13169:2001/AC:2005 - Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
EN 13170:2001
EN 13170:2001/AC:2005
EN 13170:2001/AC:2005 - Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
EN 13171:2001
EN 13171:2001/ A1:2004
EN 13171:2001/AC:2005
EN 13171:2001/AC:2005 - Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
EN 13229:2001
EN 13229:2001/A1:2003
EN 13229:2001/A1:2003 - Inset appliances including open fires fired by solid fuels - Requirements and test methods
EN 13229:2001/A2:2004
EN 13229:2001/A2:2004 Inset appliances including open fires fired by solid fuels - Requirements and test methods
EN 13229:2001/AC:2006
EN 13229:2001/AC:2006 Inset appliances including open fires fired by solid fuels - Requirements and test methods
EN 13240:2001
EN 13240:2001/A2:2004
EN 13240:2001/A2:2004 Room heaters fired by solid fuel - Requirements and test methods
EN 13240:2001/AC:2006
EN 13240:2001/AC:2006 - Room heaters fired by solid fuel - Requirements and test methods
EN 13263-1:2005
EN 13279-1:2005
EN 13454-1:2004
EN 13616:2004
EN 13616:2004/AC:2006
EN 13616:2004/AC:2006 - Overfill prevention devices for static tanks for liquid petroleum fuels
EN 13707:2004
EN 13813:2002
EN 13859-1:2005
EN 13859-2:2004
EN 13950:2005
EN 13956:2005
EN 13964:2004
EN 13967:2004
EN 13969:2004
EN 13970:2004
EN 13984:2004
EN 14037-1:2003
EN 14041:2004
EN 14041:2004/AC:2006
EN 14063-1:2004
EN 14080:2005
EN 14178-2:2004
EN 14179-2:2005
EN 14190:2005
EN 14195:2005
EN 14209:2005
EN 14216:2004
EN 14316-1:2004
EN 14317-1:2004
EN 14321-2:2005
EN 14374:2004
EN 14449:2005
EN 14449:2005/AC:2005
EN 14449:2005/AC:2005 - Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
EN 14496:2005
EN 14647:2005
EN 1469:2004
EN 14716:2004
EN 1504-2:2004
EN 1504-3:2005
EN 1504-4:2004
EN 1504-5:2004
EN 1748-1-2:2004
EN 1748-2-2:2004
EN 1863-2:2004
EN 1873:2005
EN 197-1:2000
EN 197-1:2000/ A1:2004
EN 197-4:2004
EN 413-1:2004
EN 438-7:2005
EN 442-1:1995/ A1:2003
EN 490:2004
EN 492:2004
EN 492:2004/A1:2005
EN 494:2004
EN 494:2004/A1:2005
EN 520:2004
EN 544:2005
EN 572-9:2004
Fibre-cement profiled sheets and fittings - Product specification and test methods
Fibre-cement profiled sheets and fittings - Product specification and test methods
Fibre-cement slates and fittings - Product specification and test methods
Fibre-cement slates and fittings - Product specification and test methods
Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Insulating glass units - Part 5: Evaluation of conformity
Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards - Definitions, requirements and test methods
Gypsum binders and gypsum plasters - Part 1: Definitions and requirements
Gypsum blocks - Definitions, requirements and test methods
Gypsum blocks - Definitions, requirements and test methods
Gypsum plasterboard products from reprocessing - Definitions, requirements and test methods
Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods
Gypsum plasterboards - Definitions, requirements and test methods
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
Inset appliances including open fires fired by solid fuels - Requirements and test methods
Masonry cement - Part 1: Composition, specifications and conformity criteria
Metal framing components for gypsum plasterboard systems - Definitions, requirements and test methods
Natural stone products - Modular tiles - Requirements
Natural stone products - Slabs for cladding - Requirements
Overfill prevention devices for static tanks for liquid petroleum fuels
Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods
Preformed plasterboard cornices - Definitions, requirements and test methods
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
Radiators and convectors - Part 1: Technical specifications and requirements
Residential cookers fired by solid fuel - Requirements and test methods
Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
Resilient, textile and laminate floor coverings - Essential characteristics
Resilient, textile and laminate floor coverings - Essential characteristics
Room heaters fired by solid fuel - Requirements and test methods
Screed material and floor screeds - Screed materials - Properties and requirements
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
Slate and stone products for discontinuous roofing and cladding - Part 1: Product specification
Stretched ceilings - Requirements and test methods
Suspended ceilings - Requirements and test methods
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made products pf phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation
Timber structures - Glued laminated timber - Requirements
Timber structures - Structural laminated veneer lumber - Requirements

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=1841

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.