1842
AIMPLAS.INSTITUTO TECNOLOGICO DEL PLASTICO
Designations
Designated since2018-01-31
Full scope text from the register
Product families
- Waste water engineering products outside buildings (1/3)
- Pipes, tanks and ancillaries not in contact with water intended for human consumption (1/5)
- Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5)
- Pipes, tanks and ancillaries not in contact with water intended for human consumption (5/5)
Functions
- Testing Laboratory
Intended use
- in installations for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building
- in installations in areas subject to reaction to fire regulations, used for the transport/disposal/storage of water not intended for human consumption
- in installations subject to regulations on energy conservation, used for the transport/ disposal/ storage of water not intended for human consumption, and for heating systems
- to be used outside buildings, for rain water, faecal and organic effluents
Standards
- EN 12566-1:2000/A1:2003
- EN 12566-3:2005
- EN 12566-3:2005+A1:2009
- EN 12566-3:2005+A1:2009 Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants
- EN 12566-3:2005+A2:2013
- EN 13341:2005
- EN 13341:2005+A1:2011
- EN 13341:2005+A1:2011 Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks - Requirements and test methods
- Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks
- Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants
- Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/site assembled domestic wastewater treatment plants
- Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks - Requirements and test methods
Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=1842
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=1842
This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.