1857
OTC Ltd.
Designations
Conformity assessment annexesAnnex VI Art.8, 2(c), 2nd indent, Annex VI Art.8, 2(c), 1st indent, Annex VI Art.8, 2(b) and 2c, 3rd indent
Designated since2007-08-31
Full scope text from the register
Annexes
- Annex VI Art.8, 2(c), 2nd indent, Annex VI Art.8, 2(c), 1st indent, Annex VI Art.8, 2(b) and 2c, 3rd indent
Procedures
- EC type-examination, Receipt of technical file, Certification of adequacy for the technical file
Products
- Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV)
- sawing machines with movable tool during operation, with a mechanical feed device and manual loading and/or unloading
- Band-saws with a fixed or mobile bed and band-saws with a mobile carriage, with manual loading and/or unloading, for working with wood and analogous materials or for working with meat and analogous materials (section A4 of annex IV)
- Circular saws (single or multiblade) for working with wood and analogous materials : (part of section A1 of annex IV)
- sawing machines with fixed tool during operation, having a manually operated reciprocating saw-bench or carriage
- Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s. (section A9 of annex IV)
- Vehicles servicing lifts (section A15 of annex IV)
- Portable chainsaws for woodworking (section A8 of annex IV)
- Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A14 of annex IV)
- Injection or compression plastics-moulding machines with manual loading or unloading (section A10 of annex IV)
- sawing machines with fixed tool during operation, having a fixed bed with manual feed of the workpiece or with a demountable power feed
- Circular saws (single or multi-blade) for working with meat and analogous materials : (part of section A1 of annex IV)
- Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV)
- sawing machines with fixed tool during operation, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading
- Hand-fed surface planing machines for woodworking (section A2 of annex IV)
- Combined machines of the types referred to in 1 to 4 and 7 for working with wood and analogous materials (section A5 of annex IV)
- Injection or compression rubber-moulding machines with manual loading or unloading (section A11 of annex IV)
- Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV)
Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=1857
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=1857
This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.