Finder EU notified body intelligence
1922

“Dedal – Attestation and Certification” Ltd.

🇧🇬 Bulgaria · Burgas Active

www.dedal-bg.net

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active
Designated since2007-11-27
Full scope text from the register
Product families
  • Flat glass, profiled glass and glass-block products (1/6)
  • Flat glass, profiled glass and glass-block products (4/6)
  • Cements, building limes and other hydraulic binders
  • Aggregates for uses with high safety requirements (2/2)
  • Products related to concrete, mortar and grout (1/2)
  • Precast normal/lightweight/autoclaved aerated concrete products (1/1)
  • Masonry and related products (1/3)
  • Structural metallic products and ancillaries (1/4)
  • Structural timber products (1/3)
  • Structural timber products (2/3)
  • Structural sealant glazing kits of types (curtain walling)
  • Membranes (1/3)
  • Systems of mechanically fastened flexible roof waterproofing membranes (1/1)
  • External thermal insulation composite systems/kits with rendering (ETICS)(1/1)
  • Circulation fixtures (1/2)
  • Geotextiles (1/2)
  • Chimneys, flues and specific products (1/1)
  • Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1)
  • Prefabricated stair kits (1/2)
  • Metal anchors for use in concrete for fixing lightweight systems (1/1)
  • Plastic anchors for use in concrete and masonry (1/1)
  • Road construction products (1/2)
Functions
  • FPC Certification Body
  • Inspection Body
  • Product Certification Body
Intended use
  • for external walls and roofs
  • for bridges and buildings
  • for the construction of external and internal walls subject to fire regulations, in buildings
  • chimneys
  • for railway works
  • for concrete, mortar and grout
  • in walls, columns and partitions
  • in external wall not subject to fire regulations
  • for structural use
  • for dwellings and other buildings
  • to be used in metal structures or in composite metal and concrete structures
  • for the construction of external and internal walls not subject to fire regulations, in buildings
  • for use in systems, such as facade systems, for fixing or supporting elements which contribute to the stability of the systems
  • preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products
  • for use in a glazed assembly intended specifically to provide fire resistance
  • in buildings, roads and other civil engineering work
  • for hydraulic structures and other civil engineering works
  • in buildings
  • in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal
  • for use as anti-bullet, or anti-explosion glazing
  • for roof waterproofing
  • for other uses in buildings and civil engineering works
  • for use in reduntant systems for fixing and/or supporting to concrete elements such as lightweight suspended ceilings, as well as installations
  • in external wall subject to fire regulations
  • for circulation areas
  • for road construction and surface treatment of roads
  • bridges, railtracks and buildings
  • for roads and other civil engineering works
Standards
  • A2:2005 - Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
  • Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
  • Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
  • Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling
  • Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling
  • Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
  • Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
  • Aggregates for concrete
  • Aggregates for mortar
  • Aggregates for railway ballast
  • Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
  • Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
  • Armourstone - Part 1: Specification
  • Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete
  • Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers
  • Bituminous mixtures - Material specifications - Part 3: Soft Asphalt
  • Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
  • Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
  • Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt
  • Bituminous mixtures - Material specifications - Part 7: Porous Asphalt
  • Building lime - Part 1: Definitions, specifications and conformity criteria
  • Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods
  • Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods
  • Chimneys - Clay/ceramic flue liners - Requirements and test methods
  • Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
  • Chimneys - Components - Concrete flue blocks
  • Chimneys - Components - Concrete flue liners
  • Chimneys - Components - Concrete outer wall elements
  • Chimneys - Requirements for metal chimneys - Part 1: System chimney products
  • Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes
  • Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance
  • Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions
  • Chimneys - System chimneys with plastic flue liners - Requirements and test methods
  • Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
  • EN 10025-1:2004
  • EN 10210-1:2006
  • EN 10219-1:2006
  • EN 1096-4:2004
  • EN 1168:2005
  • EN 12150-2:2004
  • EN 12337-2:2004
  • EN 12446:2003
  • EN 12620:2002
  • EN 1279-5:2005
  • EN 12794:2005
  • EN 12843:2004
  • EN 12878:2005
  • EN 12878:2005/AC:2006
  • EN 12878:2005/AC:2006 Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
  • EN 13024-2:2004
  • EN 13043:2002
  • EN 13043:2002/AC:2004
  • EN 13043:2002/AC:2004 - Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
  • EN 13055-1:2002
  • EN 13055-2:2004
  • EN 13063-1:2005
  • EN 13063-2:2005
  • EN 13069:2005
  • EN 13084-5:2005
  • EN 13084-5:2005/AC:2006
  • EN 13084-5:2005/AC:2006 Free-standing chimneys - Part 5: Material for brick liners - Product specifications
  • EN 13084-7:2005
  • EN 13108-1:2006
  • EN 13108-2:2006
  • EN 13108-3:2006
  • EN 13108-4:2006
  • EN 13108-5:2006
  • EN 13108-6:2006
  • EN 13108-7:2006
  • EN 13139:2002
  • EN 13224:2004
  • EN 13224:2004/AC:2005
  • EN 13225:2004
  • EN 13242:2002
  • EN 13242:2002/AC:2004
  • EN 13242:2002/AC:2004 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
  • EN 13249:2000
  • EN 13249:2000/A1:2005
  • EN 13250:2000
  • EN 13250:2000/A1:2005
  • EN 13250:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
  • EN 13251:2000
  • EN 13251:2000/A1:2005
  • EN 13251:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
  • EN 13252:2000
  • EN 13252:2000/A1:2005
  • EN 13252:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
  • EN 13253:2000
  • EN 13253:2000/A1:2005
  • EN 13253:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
  • EN 13254:2000
  • EN 13254:2000/A1:2005
  • EN 13254:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
  • EN 13254:2000/AC:2003
  • EN 13254:2000/AC:2003 Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
  • EN 13255:2000
  • EN 13255:2000/A1:2005
  • EN 13255:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
  • EN 13255:2000/AC:2003
  • EN 13255:2000/AC:2003 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
  • EN 13256:2000
  • EN 13256:2000/A1:2005
  • EN 13256:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
  • EN 13256:2000/AC:2003
  • EN 13256:2000/AC:2003 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
  • EN 13257:2000
  • EN 13257:2000/A1:2005
  • EN 13257:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
  • EN 13257:2000/AC:2003
  • EN 13257:2000/AC:2003 - Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
  • EN 13265:2000
  • EN 13265:2000/A1:2005
  • EN 13265:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
  • EN 13265:2000/AC:2003
  • EN 13265:2000/AC:2003 - Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
  • EN 13361:2004
  • EN 13361:2004/A1:2006
  • EN 13361:2004/A1:2006 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
  • EN 13362:2005
  • EN 13383-1:2002
  • EN 13450:2002
  • EN 13450:2002/AC:2004
  • EN 13450:2002/AC:2004 Aggregates for railway ballast
  • EN 13491:2004
  • EN 13491:2004/A1:2006
  • EN 13491:2004/A1:2006 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
  • EN 13492:2004
  • EN 13492:2004/A1:2006
  • EN 13492:2004/A1:2006 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
  • EN 13493:2005
  • EN 13693:2004
  • EN 13707:2004
  • EN 13747:2005
  • EN 13956:2005
  • EN 13956:2005/AC:2006
  • EN 13956:2005/AC:2006 Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
  • EN 13967:2004
  • EN 13969:2004
  • EN 13978-1:2005
  • EN 14081-1:2005
  • EN 14178-2:2004
  • EN 14179-2:2005
  • EN 1423:1997/A1:2003
  • EN 14250:2004
  • EN 14321-2:2005
  • EN 14374:2004
  • EN 14449:2005
  • EN 14449:2005/AC:2005
  • EN 14449:2005/AC:2005 - Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
  • EN 14471:2005
  • EN 1457:1999/A1:2002
  • EN 1457:1999/AC:2006
  • EN 1463-1:1997/ A1:2003
  • EN 14844:2006
  • EN 1504-2:2004
  • EN 1504-3:2005
  • EN 1504-4:2004
  • EN 1504-5:2004
  • EN 1504-6:2006
  • EN 1504-7:2006
  • EN 15088:2005
  • EN 1520:2002
  • EN 1748-1-2:2004
  • EN 1748-2-2:2004
  • EN 1806:2006
  • EN 1856-1:2003
  • EN 1856-1:2003/A1:2006
  • EN 1856-1:2003/A1:2006 Chimneys - Requirements for metal chimneys - Part 1: System chimney products
  • EN 1856-2:2004
  • EN 1857:2003
  • EN 1857:2003/AC:2005
  • EN 1857:2003/AC:2005 Chimneys - Components - Concrete flue liners
  • EN 1858:2003
  • EN 1863-2:2004
  • EN 40-4:2005
  • EN 40-4:2005/AC:2006
  • EN 40-4:2005/AC:2006 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
  • EN 40-5:2002
  • EN 40-6:2002
  • EN 40-7:2002
  • EN 459-1:2001
  • EN 572-9:2004
  • EN 771-1:2003
  • EN 771-1:2003/A1:2005
  • EN 771-2:2003
  • EN 771-2:2003/A1:2005
  • EN 771-3:2003
  • EN 771-3:2003/A1:2005
  • EN 771-4:2003
  • EN 771-4:2003/A1:2005
  • EN 771-5:2003
  • EN 771-5:2003/A1:2005
  • EN 771-6:2005
  • EN 934-2:2001
  • EN 934-2:2001/A1:2004
  • EN 934-2:2001/A2:2005
  • EN 934-3:2003
  • EN 934-3:2003/AC:2005
  • EN 934-4:2001
  • EN 998-2:2003
  • Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
  • Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
  • Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
  • Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
  • Free-standing chimneys - Part 5: Material for brick liners - Product specifications
  • Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
  • Geosynthetic Barriers - Characteristics required for use in the construction of canals
  • Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
  • Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
  • Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
  • Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
  • Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
  • Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
  • Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
  • Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
  • Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
  • Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
  • Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
  • Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
  • Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
  • Geotextiles and geotextile-related products -Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion )
  • Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
  • Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
  • Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
  • Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
  • Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
  • Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
  • Glass in building - Insulating glass units - Part 5: Evaluation of conformity
  • Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
  • Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
  • Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard
  • Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
  • Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
  • Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
  • Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
  • Hot rolled products of structural steels - Part 1: General technical delivery conditions
  • Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
  • Lighting columns - Part 5: Requirements for steel lighting columns
  • Lighting columns - Part 6: Requirements for aluminium lighting columns
  • Lighting columns -Part 7: Requirements for fibre reinforced polymer composite lighting columns
  • Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
  • Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
  • Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
  • Precast concrete products - Box culverts
  • Precast concrete products - Floor plates for floor systems
  • Precast concrete products - Foundation piles
  • Precast concrete products - Hollow core slabs
  • Precast concrete products - Linear structural elements
  • Precast concrete products - Masts and poles
  • Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
  • Precast concrete products - Ribbed floor elements
  • Precast concrete products - Ribbed floor elements
  • Precast concrete products - Special roof elements
  • Prefabricated reinforced components of lightweight aggregate concrete with open structure
  • Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
  • Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
  • Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
  • Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
  • Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar
  • Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
  • Required characteristics for geotextiles and geotextile-related products used in the construction of railways
  • Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two
  • Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
  • Specification for masonry units - Part 1: Clay masonry units
  • Specification for masonry units - Part 1: Clay masonry units
  • Specification for masonry units - Part 1: Clay masonry units
  • Specification for masonry units - Part 2: Calcium silicate masonry units
  • Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
  • Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
  • Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
  • Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
  • Specification for masonry units - Part 5: Manufactured stone masonry units
  • Specification for masonry units - Part 5: Manufactured stone masonry units
  • Specification for masonry units - Part 6: Natural stone masonry units
  • Specification for mortar for masonry - Part 2: Masonry mortar
  • Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
  • Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
  • Timber structures - Structural laminated veneer lumber - Requirements
Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=1922

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.