2003

SRAC CERT SRL

🇷🇴 Romania · Bucuresti Withdrawn

www.srac.ro

Designations

CPR Construction products · Regulation (EU) No 305/2011 Withdrawn

Designated since2008-02-04

Full scope text from the register

Product families

Chimneys, flues and specific products (1/1)
Geotextiles (1/2)
Structural timber products (1/3)
Cements, building limes and other hydraulic binders
Masonry and related products (1/3)
Structural metallic products and ancillaries (1/4)
Structural metallic products and ancillaries (3/4)
Structural metallic products and ancillaries (4/4)
Aggregates for uses with high safety requirements (2/2)
Road construction products (1/2)
Products related to concrete, mortar and grout (1/2)
Membranes (1/3)
Precast normal/lightweight/autoclaved aerated concrete products (1/1)

Functions

FPC Certification Body

Intended use

for roads and other civil engineering works
for concrete, mortar and grout
in buildings, roads and other civil engineering work
preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products
chimneys
for other uses in buildings and civil engineering works
for structural use
for railway works
for hydraulic structures and other civil engineering works
in buildings
for road construction and surface treatment of roads
bridges, railtracks and buildings
in walls, columns and partitions
in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal
for uses in structural metallic works
to be used in metal structures or in composite metal and concrete structures

Standards

A2:2005 - Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling
Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
Aggregates for concrete
Aggregates for mortar
Aggregates for railway ballast
Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
Armourstone - Part 1: Specification
Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete
Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers
Bituminous mixtures - Material specifications - Part 3: Soft Asphalt
Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt
Bituminous mixtures - Material specifications - Part 7: Porous Asphalt
Building lime - Part 1: Definitions, specifications and conformity criteria
Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods
Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods
Chimneys - Clay/ceramic flue liners - Requirements and test methods
Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
Chimneys - Components - Concrete flue blocks
Chimneys - Components - Concrete flue liners
Chimneys - Components - Concrete outer wall elements
Chimneys - Requirements for metal chimneys - Part 1: System chimney products
Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes
Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance
Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions
Chimneys - System chimneys with plastic flue liners - Requirements and test methods
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10025-1:2004
EN 10210-1:2006
EN 10219-1:2006
EN 1168:2005
EN 12446:2003
EN 12620:2002
EN 12794:2005
EN 12794:2005+A1:2007
EN 12794:2005+A1:2007 - Precast concrete products - Foundation piles
EN 12839:2001
EN 12843:2004
EN 12878:2005
EN 12878:2005/AC:2006
EN 12878:2005/AC:2006 Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
EN 13043:2002
EN 13043:2002/AC:2004
EN 13043:2002/AC:2004 - Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
EN 13055-1:2002
EN 13055-2:2004
EN 13063-1:2005
EN 13063-2:2005
EN 13063-3:2007
EN 13063-3:2007 - Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys
EN 13069:2005
EN 13084-5:2005
EN 13084-5:2005/AC:2006
EN 13084-5:2005/AC:2006 Free-standing chimneys - Part 5: Material for brick liners - Product specifications
EN 13084-7:2005
EN 13108-1:2006
EN 13108-2:2006
EN 13108-3:2006
EN 13108-4:2006
EN 13108-5:2006
EN 13108-6:2006
EN 13108-7:2006
EN 13139:2002
EN 13224:2004
EN 13224:2004+A1:2007
EN 13224:2004+A1:2007- Precast concrete products - Ribbed floor elements
EN 13224:2004/AC:2005
EN 13225:2004
EN 13242:2002
EN 13242:2002/AC:2004
EN 13242:2002/AC:2004 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
EN 13249:2000
EN 13249:2000/A1:2005
EN 13250:2000
EN 13250:2000/A1:2005
EN 13250:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
EN 13251:2000
EN 13251:2000/A1:2005
EN 13251:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
EN 13252:2000
EN 13252:2000/A1:2005
EN 13252:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
EN 13253:2000
EN 13253:2000/A1:2005
EN 13253:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
EN 13254:2000
EN 13254:2000/A1:2005
EN 13254:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
EN 13254:2000/AC:2003
EN 13254:2000/AC:2003 Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
EN 13255:2000
EN 13255:2000/A1:2005
EN 13255:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
EN 13255:2000/AC:2003
EN 13255:2000/AC:2003 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
EN 13256:2000
EN 13256:2000/A1:2005
EN 13256:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
EN 13256:2000/AC:2003
EN 13256:2000/AC:2003 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
EN 13257:2000
EN 13257:2000/A1:2005
EN 13257:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
EN 13257:2000/AC:2003
EN 13257:2000/AC:2003 - Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
EN 13265:2000
EN 13265:2000/A1:2005
EN 13265:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
EN 13265:2000/AC:2003
EN 13265:2000/AC:2003 - Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
EN 13361:2004
EN 13361:2004/A1:2006
EN 13361:2004/A1:2006 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
EN 13362:2005
EN 13383-1:2002
EN 13450:2002
EN 13450:2002/AC:2004
EN 13450:2002/AC:2004 Aggregates for railway ballast
EN 13479:2004
EN 13491:2004
EN 13491:2004/A1:2006
EN 13491:2004/A1:2006 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
EN 13492:2004
EN 13492:2004/A1:2006
EN 13492:2004/A1:2006 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
EN 13493:2005
EN 13693:2004
EN 13707:2004
EN 13747:2005
EN 13956:2005
EN 13956:2005/AC:2006
EN 13956:2005/AC:2006 Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
EN 13967:2004
EN 13969:2004
EN 13978-1:2005
EN 14081-1:2005
EN 14250:2004
EN 14399-1:2005
EN 14471:2005
EN 1457:1999/A1:2002
EN 1457:1999/A1:2002/AC:2007
EN 1457:1999/AC:2006
EN 14844:2006
EN 1504-2:2004
EN 1504-3:2005
EN 1504-4:2004
EN 1504-5:2004
EN 1504-6:2006
EN 1504-7:2006
EN 15088:2005
EN 1520:2002
EN 1806:2006
EN 1856-1:2003
EN 1856-1:2003/A1:2006
EN 1856-1:2003/A1:2006 Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 1856-2:2004
EN 1857:2003
EN 1857:2003/AC:2005
EN 1857:2003/AC:2005 Chimneys - Components - Concrete flue liners
EN 1857:2003/AC:2007
EN 1858:2003
EN 459-1:2001
EN 771-1:2003
EN 771-1:2003/A1:2005
EN 771-2:2003
EN 771-2:2003/A1:2005
EN 771-3:2003
EN 771-3:2003/A1:2005
EN 771-4:2003
EN 771-4:2003/A1:2005
EN 771-5:2003
EN 771-5:2003/A1:2005
EN 771-6:2005
EN 934-2:2001
EN 934-2:2001/A1:2004
EN 934-2:2001/A2:2005
EN 934-3:2003
EN 934-3:2003/AC:2005
EN 934-4:2001
EN 998-2:2003
Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
Free-standing chimneys - Part 5: Material for brick liners - Product specifications
Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
Geosynthetic Barriers - Characteristics required for use in the construction of canals
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
Geotextiles and geotextile-related products -Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion )
High-strength structural bolting assemblies for preloading - Part 1: General requirements
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
Hot rolled products of structural steels - Part 1: General technical delivery conditions
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
Precast concrete products - Box culverts
Precast concrete products - Elements for fences
Precast concrete products - Floor plates for floor systems
Precast concrete products - Foundation piles
Precast concrete products - Hollow core slabs
Precast concrete products - Linear structural elements
Precast concrete products - Masts and poles
Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
Precast concrete products - Ribbed floor elements
Precast concrete products - Ribbed floor elements
Precast concrete products - Special roof elements
Prefabricated reinforced components of lightweight aggregate concrete with open structure
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
Required characteristics for geotextiles and geotextile-related products used in the construction of railways
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 2: Calcium silicate masonry units
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 5: Manufactured stone masonry units
Specification for masonry units - Part 5: Manufactured stone masonry units
Specification for masonry units - Part 6: Natural stone masonry units
Specification for mortar for masonry - Part 2: Masonry mortar
Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=2003

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.