2144
University of Architecture, Civil Engineering and Geodesy, Research and Scientific Center
Designations
Designated since2009-03-06
Full scope text from the register
Product families
- Aggregates for uses with high safety requirements (2/2)
- Products related to concrete, mortar and grout (1/2)
- Precast normal/lightweight/autoclaved aerated concrete products (1/1)
- Masonry and related products (1/3)
- Membranes (1/3)
- Construction adhesives (1/2)
- Road construction products (1/2)
- Geotextiles (1/2)
- Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1)
Functions
- Inspection Body
- FPC Certification Body
- Testing Laboratory
Intended use
- for road construction and surface treatment of roads
- in buildings, roads and other civil engineering work
- for the construction of external and internal walls not subject to fire regulations, in buildings
- in buildings
- for concrete, mortar and grout
- for railway works
- in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal
- for structural use
- in walls, columns and partitions
- for the construction of external and internal walls subject to fire regulations, in buildings
- for other uses in buildings and civil engineering works
- for hydraulic structures and other civil engineering works
- for roads and other civil engineering works
- for internal and external uses in buildings and other civil engineering works
Standards
- Aggregates for concrete
- Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
- Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
- Aggregates for mortar
- Aggregates for railway ballast
- Armourstone - Part 1: Specification
- Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete
- Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers
- Bituminous mixtures - Material specifications - Part 3: Soft Asphalt
- Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
- Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
- Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt
- Bituminous mixtures - Material specifications - Part 7: Porous Asphalt
- EN 1168:2005+A2:2009
- EN 1168:2005+A2:2009 Precast concrete products - Hollow core slabs
- EN 1168:2005+A3:2011
- EN 1168:2005+A3:2011 Precast concrete products - Hollow core slabs
- EN 12004:2007
- EN 12004:2007 - Adhesives for tiles - Requirements, evaluation of conformity, classification and designation
- EN 12620:2002+A1:2008
- EN 12794:2005+A1:2007
- EN 12794:2005+A1:2007 - Precast concrete products - Foundation piles
- EN 12794:2005+A1:2007/AC:2008
- EN 12794:2005+A1:2007/AC:2008 Precast concrete products - Foundation piles
- EN 12843:2004
- EN 13043:2002
- EN 13043:2002/AC:2004
- EN 13043:2002/AC:2004 - Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
- EN 13055-1:2002
- EN 13055-1:2002/AC:2004
- EN 13055-1:2002/AC:2004 Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
- EN 13055-2:2004
- EN 13108-1:2006
- EN 13108-1:2006/AC:2008
- EN 13108-1:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete
- EN 13108-2:2006
- EN 13108-2:2006/AC:2008
- EN 13108-2:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers
- EN 13108-3:2006
- EN 13108-3:2006/AC:2008
- EN 13108-3:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 3: Soft Asphalt
- EN 13108-4:2006
- EN 13108-4:2006/AC:2008
- EN 13108-4:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
- EN 13108-5:2006
- EN 13108-5:2006/AC:2008
- EN 13108-5:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
- EN 13108-6:2006
- EN 13108-6:2006/AC:2008
- EN 13108-6:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt
- EN 13108-7:2006
- EN 13108-7:2006/AC:2008
- EN 13108-7:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 7: Porous Asphalt
- EN 13139:2002
- EN 13139:2002/AC:2004
- EN 13139:2002/AC:2004 Aggregates for mortar
- EN 13224:2004+A1:2007
- EN 13224:2004+A1:2007- Precast concrete products - Ribbed floor elements
- EN 13224:2011
- EN 13224:2011 Precast concrete products - Ribbed floor elements
- EN 13225:2004
- EN 13225:2004/AC:2006
- EN 13225:2004/AC:2006 Precast concrete products - Linear structural elements
- EN 13242:2002+A1:2007
- EN 13249:2000
- EN 13249:2000/A1:2005
- EN 13250:2000
- EN 13250:2000/A1:2005
- EN 13250:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
- EN 13251:2000
- EN 13251:2000/A1:2005
- EN 13251:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
- EN 13252:2000
- EN 13252:2000/A1:2005
- EN 13252:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
- EN 13253:2000
- EN 13253:2000/A1:2005
- EN 13253:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
- EN 13254:2000
- EN 13254:2000/A1:2005
- EN 13254:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
- EN 13254:2000/AC:2003
- EN 13254:2000/AC:2003 Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
- EN 13255:2000
- EN 13255:2000/A1:2005
- EN 13255:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
- EN 13255:2000/AC:2003
- EN 13255:2000/AC:2003 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
- EN 13256:2000
- EN 13256:2000/A1:2005
- EN 13256:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
- EN 13256:2000/AC:2003
- EN 13256:2000/AC:2003 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
- EN 13257:2000
- EN 13257:2000/A1:2005
- EN 13257:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
- EN 13257:2000/AC:2003
- EN 13257:2000/AC:2003 - Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
- EN 13265:2000
- EN 13265:2000/A1:2005
- EN 13265:2000/A1:2005 - Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
- EN 13265:2000/AC:2003
- EN 13265:2000/AC:2003 - Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
- EN 13361:2004
- EN 13361:2004/A1:2006
- EN 13361:2004/A1:2006 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
- EN 13362:2005
- EN 13383-1:2002
- EN 13383-1:2002/AC:2004
- EN 13383-1:2002/AC:2004 Armourstone - Part 1: Specification
- EN 13450:2002
- EN 13450:2002/AC:2004
- EN 13450:2002/AC:2004 Aggregates for railway ballast
- EN 13491:2004
- EN 13491:2004/A1:2006
- EN 13491:2004/A1:2006 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
- EN 13492:2004
- EN 13492:2004/A1:2006
- EN 13492:2004/A1:2006 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
- EN 13493:2005
- EN 13693:2004+A1:2009
- EN 13693:2004+A1:2009 Precast concrete products - Special roof elements
- EN 13707:2004+A2:2009
- EN 13707:2004+A2:2009 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
- EN 13747:2005+A2:2010
- EN 13956:2005
- EN 13956:2005/AC:2006
- EN 13956:2005/AC:2006 Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
- EN 13956:2012
- EN 13956:2012 Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
- EN 13967:2004
- EN 13967:2004/A1:2006
- EN 13967:2004/A1:2006 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
- EN 13969:2004
- EN 13969:2004/A1:2006
- EN 13969:2004/A1:2006 Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
- EN 13978-1:2005
- EN 1504-2:2004
- EN 1504-3:2005
- EN 1504-4:2004
- EN 1504-5:2004
- EN 1504-6:2006
- EN 1504-7:2006
- EN 1520:2011
- EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
- EN 771-1:2011
- EN 771-1:2011 Specification for masonry units - Part 1: Clay masonry units
- EN 771-2:2011
- EN 771-2:2011 Specification for masonry units - Part 2: Calcium silicate masonry units
- EN 771-3:2011
- EN 771-3:2011 Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
- EN 771-4:2011
- EN 771-4:2011 Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
- EN 771-5:2011
- EN 771-5:2011 Specification for masonry units - Part 5: Manufactured stone masonry units
- EN 771-6:2011
- EN 771-6:2011 Specification for masonry units - Part 6: Natural stone masonry units
- EN 934-2:2009
- EN 934-2:2009 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
- EN 934-3:2009
- EN 934-3:2009 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling
- EN 934-4:2009
- EN 934-4:2009 Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
- EN 998-2:2010
- EN 998-2:2010 Specification for mortar for masonry – Part 2: Masonry mortar
- Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
- Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
- Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
- Geosynthetic Barriers - Characteristics required for use in the construction of canals
- Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
- Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
- Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
- Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
- Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
- Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
- Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
- Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
- Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
- Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
- Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
- Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
- Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
- Geotextiles and geotextile-related products -Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion )
- Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
- Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
- Precast concrete products - Floor plates for floor systems
- Precast concrete products - Linear structural elements
- Precast concrete products - Masts and poles
- Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
- Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
- Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
- Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
- Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
- Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar
- Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
- Required characteristics for geotextiles and geotextile-related products used in the construction of railways
Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=2144
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=2144
This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.