Efectis Era Avrasya Test ve Belgelendirme A.Ş.

Türkiye · Turkey Suspended

www.efectis.com

Designations

CPR Construction products · Regulation (EU) No 305/2011 Suspended

Designated since2011-02-05

Full scope text from the register

Product families

Membranes (2/3)
Thermal insulating products (2/2)
Products related to concrete, mortar and grout (2/2)
Gypsum products (1/4)
Gypsum products (2/4)
Curtain wallings (1/1)
Wood-based panels (2/2)
Roof coverings, rooflights, roof windows and ancillary products (2/6)
Internal and external wall and ceiling finishes (3/5)
Flat glass, profiled glass and glass-block products (2/6)
Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5)
Construction adhesives (2/2)
Masonry and related products (3/3)

Functions

Testing Laboratory

Intended use

as external walls not subject to reaction to fire requirements
for uses subject to reaction to fire regulations
as internal or external finishes in ceilings subject to reaction to fire regulations
as internal finishes in walls or ceilings subject to reaction to fire regulations
for non structural elements in internal or external applications
in walls and partitions subject to reaction to fire regulations
for uses subject to regulations on reaction to fire
in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings
in installations in areas subject to reaction to fire regulations, used for the transport/disposal/storage of water not intended for human consumption
as external finishes in walls or ceilings subject to reaction to fire regulations
as internal or external finishes in walls or ceilings subject to reaction to fire regulations
in walls, partitions or ceilings (or lining thereof) subject to reaction to fire requirements

Standards

Corrugated bitumen sheets - Product specification and test methods
Curtain walling - Product standard
EN 12004:2007
EN 12004:2007 - Adhesives for tiles - Requirements, evaluation of conformity, classification and designation
EN 12057:2004
EN 12467:2004
EN 12467:2004/A1:2005
EN 12467:2004/A2:2006
EN 12467:2004/A2:2006 Fibre-cement flat sheets - Product specification and test methods
EN 1279-5:2005+A2:2010
EN 1279-5:2005+A2:2010 Glass in building - Insulating glass units - Part 5: Evaluation of conformity
EN 13162:2008
EN 13162:2008 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
EN 13163:2008
EN 13163:2008 Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
EN 13164:2008
EN 13164:2008 Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
EN 13165:2008
EN 13165:2008 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
EN 13166:2008
EN 13166:2008 Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
EN 13167:2008
EN 13167:2008 Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
EN 13168:2008
EN 13168:2008 Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
EN 13169:2008
EN 13169:2008 Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
EN 13170:2008
EN 13170:2008 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
EN 13171:2008
EN 13171:2008 Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
EN 13245-2:2008
EN 13245-2:2008/AC:2009
EN 13245-2:2008/AC:2009 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
EN 13279-1:2008
EN 13341:2005+A1:2011
EN 13341:2005+A1:2011 Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks - Requirements and test methods
EN 13658-1:2005
EN 13658-2:2005
EN 13707:2004+A2:2009
EN 13707:2004+A2:2009 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
EN 13815:2006
EN 13830:2003
EN 13859-1:2010
EN 13859-1:2010 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
EN 13859-2:2010
EN 13859-2:2010 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
EN 13915:2007
EN 13915:2007 - Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
EN 13950:2005
EN 13956:2005
EN 13956:2005/AC:2006
EN 13956:2005/AC:2006 Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
EN 13956:2012
EN 13956:2012 Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
EN 13963:2005
EN 13963:2005/AC:2006
EN 13963:2005/AC:2006 Jointing materials for gypsum plasterboards - Definitions, requirements and test methods
EN 13964:2004
EN 13964:2004/A1:2006
EN 13964:2004/A1:2006 Suspended ceilings - Requirements and test methods
EN 13967:2004
EN 13967:2004/A1:2006
EN 13967:2004/A1:2006 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
EN 13969:2004
EN 13969:2004/A1:2006
EN 13969:2004/A1:2006 Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
EN 13970:2004
EN 13970:2004/A1:2006
EN 13970:2004/A1:2006 Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
EN 13984:2004
EN 13984:2004/A1:2006
EN 13984:2004/A1:2006 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
EN 13984:2013
EN 13984:2013 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
EN 13986:2004
EN 14064-1:2010
EN 14190:2005
EN 14209:2005
EN 14303:2009
EN 14303:2009+A1:2013
EN 14303:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification
EN 14304:2009
EN 14304:2009+A1:2013
EN 14304:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification
EN 14305:2009
EN 14305:2009+A1:2013
EN 14305:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification
EN 14306:2009
EN 14306:2009+A1:2013
EN 14306:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification
EN 14307:2009
EN 14307:2009+A1:2013
EN 14307:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification
EN 14308:2009
EN 14308:2009+A1:2013
EN 14308:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification
EN 14309:2009
EN 14309:2009+A1:2013
EN 14309:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification
EN 14313:2009
EN 14313:2009+A1:2013
EN 14313:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
EN 14314:2009
EN 14314:2009+A1:2013
EN 14314:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification
EN 14351-1:2006+A1:2010
EN 14449:2005
EN 14449:2005/AC:2005
EN 14449:2005/AC:2005 - Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
EN 14496:2005
EN 14509:2006
EN 14509:2006/AC:2008
EN 1469:2004
EN 14716:2004
EN 14782:2006
EN 14783:2006
EN 14909:2006
EN 14915:2006
EN 14915:2006/AC:2007
EN 14933:2007
EN 14933:2007 - Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification
EN 14934:2007
EN 14934:2007 - Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification
EN 14963:2006
EN 14967:2006
EN 1504-2:2004
EN 1504-3:2005
EN 1504-4:2004
EN 1504-6:2006
EN 15102:2007+A1:2011
EN 15102:2007+A1:2011 Decorative wall coverings - Roll and panel form
EN 15283-1:2008+A1:2009
EN 15283-1:2008+A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement
EN 15283-2:2008+A1:2009
EN 15283-2:2008+A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards
EN 15824:2009
EN 1873:2005
EN 438-7:2005
EN 490: 2011
EN 490:2004/A1:2006
EN 490:2004/A1:2006 - Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
EN 492:2004
EN 492:2004/A1:2005
EN 492:2004/A2:2006
EN 492:2004/A2:2006 Fibre-cement slates and fittings - Product specification and test methods
EN 494:2004+A3:2007
EN 494:2004+A3:2007 Fibre-cement profiled sheets and fittings - Product specification and test methods
EN 520:2004+A1:2009
EN 520:2004+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods
EN 534:2006+A1:2010
EN 544:2011
EN 544:2011 Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods
Fibre-cement flat sheets - Product specification and test methods
Fibre-cement flat sheets - Product specification and test methods
Fibre-cement slates and fittings - Product specification and test methods
Fibre-cement slates and fittings - Product specification and test methods
Fibrous gypsum plaster casts - Definitions, requirements and test methods
Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
Gypsum binders and gypsum plasters - Part 1: Definitions and requirements
Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards - Definitions, requirements and test methods
Gypsum plasterboard products from reprocessing - Definitions, requirements and test methods
Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
Jointing materials for gypsum plasterboards - Definitions, requirements and test methods
Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering
Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering
Natural stone products - Modular tiles - Requirements
Natural stone products - Slabs for cladding - Requirements
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods
Preformed plasterboard cornices - Definitions, requirements and test methods
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar
Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
Self-supporting double skin metal faced insulating panels - Factory made products - Specifications (AC)
Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking
Solid wood panelling and cladding — Characteristics, evaluation of conformity and marking (AC)
Specification for external renders and internal plasters based on organic binders
Stretched ceilings - Requirements and test methods
Suspended ceilings - Requirements and test methods
Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification
Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification
Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation
Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=2184

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.