2441
European Quality Assurance
Designations
Conformity assessment annexesAnnex IX - Art. 12 (3) (b) and (4) (a)
Designated since2013-03-05
Full scope text from the register
Annexes
- Annex IX - Art. 12 (3) (b) and (4) (a)
Procedures
- EC type-examination
Products
- 10. Injection or compression plastics-moulding machinery with manual loading or unloading
- 16. Vehicle servicing lifts
- 9. Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s
- 7. Hand-fed vertical spindle moulding machinery for working with wood and material with similar physical characteristics
- 5. Combined machinery of the types referred to in points 1 to 4 and in point 7 for working with wood and material with similar physical characteristics
- 6. Hand-fed tenoning machinery with several tool holders for woodworking
- 17. Devices for the lifting of persons or of persons and goods involving a hazard of falling from a vertical height of more than three metres
- 1.2. Circular saws (single- or multi-blade) - sawing machinery with fixed blade(s) during cutting, having a manually operated reciprocating saw-bench or carriage - for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics
- 4.2. Band-saws with manual loading and/or unloading - sawing machinery with blade(s) assembled on a carriage with reciprocating motion - for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics
- 3. Thicknessers for one-side dressing having a built-in mechanical feed device, with manual loading and/or unloading for woodworking
- 2. Hand-fed surface planing machinery for woodworking
- 4.1. Band-saws with manual loading and/or unloading - sawing machinery with fixed blade(s) during cutting, having a fixed or reciprocating-movement bed or support for the workpiece - for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics
- 11. Injection or compression rubber-moulding machinery with manual loading or unloading
- 1.3. Circular saws (single- or multi-blade) - sawing machinery with fixed blade(s) during cutting, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading - for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics
- 1.4. Circular saws (single- or multi-blade) - sawing machinery with movable blade(s) during cutting, having mechanical movement of the blade, with manual loading and/or unloading - for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics
- 1.1. Circular saws (single- or multi-blade) - sawing machinery with fixed blade(s) during cutting, having a fixed bed or support with manual feed of the workpiece or with a demountable power feed - for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics
Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=2441
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=2441
This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.