SZUTEST Ltd

🇧🇬 Bulgaria · Sofia Suspended

www.szutest.com

Designations

CPR Construction products · Regulation (EU) No 305/2011 Suspended

Designated since2018-05-03

Full scope text from the register

Product families

Chimneys, flues and specific products (1/1)
Structural bearings (1/1)
Chimneys, flues and specific products (1/2)
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
Circulation fixtures (1/2)
Geotextiles (1/2)
Structural timber products (1/3)
Wood-based panels (1/2)
Cements, building limes and other hydraulic binders
Masonry and related products (1/3)
Floorings (2/2)
Structural metallic products and ancillaries (1/4)
Structural metallic products and ancillaries (2/4)
Structural metallic products and ancillaries (3/4)
Structural metallic products and ancillaries (4/4)
Aggregates for uses with high safety requirements (2/2)
Road construction products (1/2)
Membranes (1/3)
Membranes (2/3)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Products related to concrete, mortar and grout (1/2)
Products related to concrete, mortar and grout (2/2)
Pipes, tanks and ancillaries not in contact with water intended for human consumption (3/5)
Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5)
Sealants for non-structural use in joints in buildings and pedestrian walkways (2/2)

Functions

Product Certification Body
FPC Certification Body

Intended use

for hydraulic structures and other civil engineering works
for uses in structural metallic works
to be used in metal structures or in composite metal and concrete structures
for roads and other civil engineering works
preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products
in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal
for railway works
for internal uses
for circulation areas
in installations in areas subject to reaction to fire regulations, used for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building
bridges, railtracks and buildings
in buildings
in installations in areas subject to resistance to fire regulations, used for the transport/distribution/storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building
for other uses in buildings and civil engineering works
in buildings and civil engineering works where requirements on individual bearings are critical
fire safety
in buildings, roads and other civil engineering work
for structural elements in internal or external application
fire/smoke compartmentation and on escape routes
in installations in areas subject to reaction to fire regulations, used for the transport/disposal/storage of water not intended for human consumption
for uses subject to reaction to fire regulations
chimneys
for uses in work's frames and foundations
for structural elements in internal or external applications
for concrete, mortar and grout
in walls, columns and partitions
for uses subject to regulations on reaction to fire
for internal uses including enclosed public transport premises
for road construction and surface treatment of roads
in installations in areas subject to reaction to fire regulations, used for the transport/ distribution/storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building

Standards

Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling
Agglomerated stone - Modular tiles for flooring and stairs (internal and external)
Aggregates for concrete
Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
Aggregates for mortar
Aggregates for railway ballast
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
Anti-seismic devices
Armourstone - Part 1: Specification
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements
Bitumen and bituminous binders - Specifications for hard paving grade bitumens
Bitumen and bituminous binders - Specifications for paving grade bitumen
Bitumen and bituminous binders — Framework for specifying cationic bituminous emulsions
Bitumen and bituminous binders — Framework for specifying cut-back and fluxed bituminous binders
Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete
Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers
Bituminous mixtures - Material specifications - Part 3: Soft Asphalt
Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt
Bituminous mixtures - Material specifications - Part 7: Porous Asphalt
Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
Building hardware - Single-axis hinges - Requirements and tests methods
Calcium aluminate cement - Composition, specifications and conformity criteria
Cement - Composition, specifications and conformity criteria for very low heat special cements
Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances
Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances
Chimneys - System chimneys with plastic flue liners- Requirements and test methods
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 10025-1:2004
EN 10210-1:2006
EN 10219-1:2006
EN 1057:2006+A1:2010
EN 1090-1:2009+A1:2011
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
EN 1125:2008
EN 12101-10:2005
EN 12101-10:2005/AC:2007
EN 12101-10:2005/AC:2007 Smoke and heat control systems - Part 10: Power supplies
EN 12101-1:2005
EN 12101-1:2005/A1:2006
EN 12101-1:2005/A1:2006 - Smoke and heat control systems - Part 1: Specification for smoke barriers
EN 12101-2:2003
EN 12101-3:2015
EN 12101-6:2005
EN 12101-6:2005/AC:2006
EN 12101-6:2005/AC:2006 Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits
EN 12101-7:2011
EN 12101-8:2011
EN 12209:2003
EN 12209:2003/AC:2005
EN 12209:2003/AC:2005 Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
EN 12285-2:2005
EN 12591:2009
EN 12620:2002+A1:2008
EN 12878:2005
EN 12878:2005/AC:2006
EN 12878:2005/AC:2006 Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
EN 12899-1:2007
EN 12899-2:2007
EN 13043:2002
EN 13043:2002/AC:2004
EN 13043:2002/AC:2004 - Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
EN 13055-1:2002
EN 13055-1:2002/AC:2004
EN 13055-1:2002/AC:2004 Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
EN 13055-2:2004
EN 13084-5:2005
EN 13084-5:2005/AC:2006
EN 13084-5:2005/AC:2006 Free-standing chimneys - Part 5: Material for brick liners - Product specifications
EN 13084-7:2012
EN 13084-7:2012 Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
EN 13108-1:2006
EN 13108-1:2006/AC:2008
EN 13108-1:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete
EN 13108-2:2006
EN 13108-2:2006/AC:2008
EN 13108-2:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers
EN 13108-3:2006
EN 13108-3:2006/AC:2008
EN 13108-3:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 3: Soft Asphalt
EN 13108-4:2006
EN 13108-4:2006/AC:2008
EN 13108-4:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
EN 13108-5:2006
EN 13108-5:2006/AC:2008
EN 13108-5:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
EN 13108-6:2006
EN 13108-6:2006/AC:2008
EN 13108-6:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt
EN 13108-7:2006
EN 13108-7:2006/AC:2008
EN 13108-7:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 7: Porous Asphalt
EN 13139:2002
EN 13139:2002/AC:2004
EN 13139:2002/AC:2004 Aggregates for mortar
EN 1317-5:2007+A2:2012
EN 1317-5:2007+A2:2012 Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
EN 1317-5:2007+A2:2012/AC:2012
EN 1317-5:2007+A2:2012/AC:2012 Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
EN 13242:2002+A1:2007
EN 13249:2016
EN 13250:2016
EN 13251:2016
EN 13252:2016
EN 13253:2016
EN 13254:2016
EN 13255:2016
EN 13256:2016
EN 13257:2016
EN 13263-1:2005+A1:2009
EN 13263-1:2005+A1:2009 Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
EN 13265:2016
EN 13361:2004
EN 13361:2004/A1:2006
EN 13361:2004/A1:2006 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
EN 13362:2005
EN 13383-1:2002
EN 13383-1:2002/AC:2004
EN 13383-1:2002/AC:2004 Armourstone - Part 1: Specification
EN 13450:2002
EN 13450:2002/AC:2004
EN 13450:2002/AC:2004 Aggregates for railway ballast
EN 13454-1:2004
EN 13479:2004
EN 13491:2004
EN 13491:2004/A1:2006
EN 13491:2004/A1:2006 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
EN 13492:2004
EN 13492:2004/A1:2006
EN 13492:2004/A1:2006 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
EN 13493:2005
EN 13707:2004+A2:2009
EN 13707:2004+A2:2009 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
EN 13808:2013
EN 13813:2002
EN 13859-1:2010
EN 13859-1:2010 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
EN 13859-2:2010
EN 13859-2:2010 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
EN 13924:2006
EN 13924:2006/AC:2006
EN 13924:2006/AC:2006 Bitumen and bituminous binders - Specifications for hard paving grade bitumens
EN 13956:2012
EN 13956:2012 Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
EN 13967:2012
EN 13967:2012 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
EN 13969:2004
EN 13969:2004/A1:2006
EN 13969:2004/A1:2006 Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
EN 13970:2004
EN 13970:2004/A1:2006
EN 13970:2004/A1:2006 Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
EN 13984:2013
EN 13984:2013 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
EN 13986:2004+A1:2015
EN 14023:2010
EN 14023:2010 Bitumen and bituminous binders - Specification framework for polymer modified bitumens
EN 14081-1:2005+A1:2011
EN 14081-1:2005+A1:2011 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
EN 14216:2015
EN 14250:2010
EN 14399-1:2015
EN 14471:2013+A1:2015
EN 14647:2005
EN 14647:2005/AC:2006
EN 14647:2005/AC:2006 Calcium aluminate cement - Composition, specifications and conformity criteria
EN 14800:2007
EN 14800:2007 - Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
EN 14909:2012
EN 14909:2012 Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
EN 14989-1:2007
EN 14989-2:2007
EN 1504-2:2004
EN 1504-3:2005
EN 1504-4:2004
EN 1504-5:2004
EN 1504-6:2006
EN 1504-7:2006
EN 15048-1:2007
EN 15069:2008
EN 15088:2005
EN 15129:2009
EN 15167-1:2006
EN 15285:2008
EN 15285:2008/AC:2008
EN 15285:2008/AC:2008 - Agglomerated stone - Modular tiles for flooring and stairs (internal and external)
EN 15322:2013
EN 15651-1:2012
EN 15651-2:2012
EN 15651-3:2012
EN 15651-4:2012
EN 15814:2011+A2:2014
EN 179:2008
EN 1856-1:2009
EN 1856-1:2009 Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 1935:2002
EN 1935:2002/AC:2003
EN 1935:2002/AC:2003 Building hardware - Single-axis hinges - Requirements and test methods
EN 197-1:2011
EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 295-1:2013
EN 295-5:2013
EN 295-7:2013
EN 331:1998
EN 331:1998/A1:2010
EN 331:1998/A1:2010 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
EN 40-4:2005
EN 40-4:2005/AC:2006
EN 40-4:2005/AC:2006 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
EN 40-5:2002
EN 40-6:2002
EN 40-7:2002
EN 413-1:2011
EN 413-1:2011 Masonry cement - Part 1: Composition, specifications and conformity criteria
EN 450-1:2012
EN 450-1:2012 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
EN 459-1:2010
EN 459-1:2010 Building lime - Part 1: Definitions, specifications and conformity criteria
EN 54-10:2002
EN 54-10:2002/A1:2005
EN 54-10:2002/A1:2005 - Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors
EN 54-11:2001
EN 54-11:2001/A1:2005
EN 54-11:2001/A1:2005 - Fire detection and fire alarm systems - Part 11: Manual call points
EN 54-12:2002
EN 54-12:2015
EN 54-16:2008
EN 54-17:2005
EN 54-17:2005/AC:2007
EN 54-17:2005/AC:2007 - Fire detection and fire alarm systems - Part 17: Short-circuit isolators
EN 54-18:2005
EN 54-18:2005/AC:2007
EN 54-18:2005/AC:2007 - Fire detection and fire alarm systems - Part 18: Input/output devices
EN 54-20:2006
EN 54-20:2006/AC:2008
EN 54-20:2006/AC:2008 Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
EN 54-21:2006
EN 54-23:2010
EN 54-24:2008
EN 54-25: 2008/AC:2012 Fire detection and fire alarm systems - Part 25: Components using radio links
EN 54-25:2008
EN 54-25:2008/AC:2012
EN 54-2:1997
EN 54-2:1997/A1:2006
EN 54-2:1997/A1:2006 - Fire detection and fire alarm systems - Part 2: Control and indicating equipment
EN 54-2:1997/AC:1999
EN 54-2:1997/AC:1999 - Fire detection and fire alarm systems - Part 2: Control and indicating equipment
EN 54-3:2001/A1:2002
EN 54-3:2001/A2:2006
EN 54-4:1997
EN 54-4:1997/A1:2002
EN 54-4:1997/A2:2006
EN 54-4:1997/A2:2006 Fire detection and fire alarm systems - Part 4: Power supply equipment
EN 54-4:1997/AC:1999
EN 54-5:2000/A1:2002
EN 54-7:2000/A1:2002
EN 54-7:2000/A2:2006
EN 54-7:2000/A2:2006 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization
EN 671-1:2012
EN 671-1:2012 Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
EN 671-2:2012
EN 671-2:2012 Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
EN 771-1:2011+A1:2015
EN 771-2:2011+A1:2015
EN 771-3:2011+A1:2015
EN 771-4:2011+A1:2015
EN 771-5:2011+A1:2015
EN 771-6:2011+A1:2015
EN 934-2:2009+A1:2012
EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
EN 934-3:2009+A1:2012
EN 934-3:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
EN 934-4:2009
EN 934-4:2009 Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
EN 934-5:2007
EN 998-2:2016
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors
Fire detection and fire alarm systems - Part 11: Manual call points
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors - Line detectors using an optical beam
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam
Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
Fire detection and fire alarm systems - Part 17: Short-circuit isolators
Fire detection and fire alarm systems - Part 18: Input/output devices
Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment
Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices
Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers
Fire detection and fire alarm systems - Part 25: Components using radio links
Fire detection and fire alarm systems - Part 2: Control and indicating equipment
Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders
Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders.
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 5: Heat detectors - Point detectors
Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization
Fixed, vertical road traffic signs - Part 1: Fixed signs
Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
Free-standing chimneys - Part 5: Material for brick liners - Product specifications
Geosynthetic Barriers - Characteristics required for use in the construction of canals
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion).
Geotextiles and geotextile-related products — Characteristics required for the use in the construction of reservoirs and dams
Geotextiles and geotextile-related products — Characteristics required for use in drainage systems
Geotextiles and geotextile-related products — Characteristics required for use in earthworks, foundations and retaining structures
Geotextiles and geotextile-related products — Characteristics required for use in erosion control works (coastal protection, bank revetments)
Geotextiles and geotextile-related products — Characteristics required for use in liquid waste containment projects
Geotextiles and geotextile-related products — Characteristics required for use in solid waste disposals
Geotextiles and geotextile-related products — Characteristics required for use in the construction of canals
Geotextiles and geotextile-related products — Characteristics required for use in the construction of railways
Geotextiles and geotextile-related products — Characteristics required for use in the construction of tunnels and underground structures
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
High-strength structural bolting assemblies for preloading - Part 1: General requirements
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
Hot rolled products of structural steels - Part 1: General technical delivery conditions
Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
Lighting columns - Part 5: Requirements for steel lighting columns
Lighting columns - Part 6: Requirements for aluminium lighting columns
Lighting columns -Part 7: Requirements for fibre reinforced polymer composite lighting columns
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
Non-preloaded structural bolting assemblies - Part 1: General requirements
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
Polymer modified bituminous thick coatings for waterproofing-Definitions and requirements
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
Screed material and floor screeds - Screed materials - Properties and requirements
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkway
Smoke and heat control systems - Part 10: Power supplies
Smoke and heat control systems - Part 1: Specification for smoke barriers
Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators
Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits
Smoke and heat control systems - Part 7: Smoke duct sections
Smoke and heat control systems - Part 8: Smoke control dampers
Specification for masonry units - Part 6: Natural stone masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 2: Calcium silicate masonry units
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 5: Manufactured stonemasonry units
Specification for mortar for masonry - Part 2: Masonry mortar
Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints
Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for perforated pipes and fittings
Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
Wood-based panels for use in construction- Characteristics, evaluation of conformity and marking
Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids

CPR Construction products · Regulation (EU) No 305/2011 Suspended

Designated since2020-08-27

Full scope text from the register

Product families

Circulation fixtures (1/2)
Geotextiles (1/2)
Structural timber products (1/3)
Wood-based panels (1/2)
Cements, building limes and other hydraulic binders
Masonry and related products (1/3)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Products related to concrete, mortar and grout (1/2)
Products related to concrete, mortar and grout (2/2)
Pipes, tanks and ancillaries not in contact with water intended for human consumption (3/5)
Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5)
Sealants for non-structural use in joints in buildings and pedestrian walkways (2/2)
Floorings (2/2)
Structural metallic products and ancillaries (1/4)
Structural metallic products and ancillaries (2/4)
Structural metallic products and ancillaries (4/4)
Aggregates for uses with high safety requirements (2/2)
Road construction products (1/2)
Membranes (1/3)
Membranes (2/3)
Chimneys, flues and specific products (1/1)
Structural bearings (1/1)
Chimneys, flues and specific products (1/2)
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
Precast normal/lightweight/autoclaved aerated concrete products (1/1)
Power, control and communication cables (1/3)

Functions

Product Certification Body
FPC Certification Body

Intended use

in buildings, roads and other civil engineering work
for railway works
for uses in structural metallic works
for structural elements in internal or external applications
in buildings
in installations in areas subject to resistance to fire regulations, used for the transport/distribution/storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building
for uses subject to regulations on reaction to fire
preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products
chimneys
in buildings and civil engineering works where requirements on individual bearings are critical
for hydraulic structures and other civil engineering works
for structural elements in internal or external application
for other uses in buildings and civil engineering works
for uses in work's frames and foundations
for uses subject to reaction to fire regulations
for bridge decks
fire safety
for circulation areas
fire/smoke compartmentation and on escape routes
for structural use
for road construction and surface treatment of roads
for concrete, mortar and grout
bridges, railtracks and buildings
in installations in areas subject to reaction to fire regulations, used for the transport/disposal/storage of water not intended for human consumption
in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal
in installations in areas subject to reaction to fire regulations, used for the transport/ distribution/storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building
to be used in metal structures or in composite metal and concrete structures
for roads and other civil engineering works
for structural uses in concrete, mortar and grout
for internal uses
for internal uses including enclosed public transport premises
in installations in areas subject to reaction to fire regulations, used for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building
in walls, columns and partitions

Standards

Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling
Agglomerated stone - Modular tiles for flooring and stairs (internal and external)
Aggregates for concrete
Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
Aggregates for mortar
Aggregates for railway ballast
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
Anti-seismic devices
Armourstone - Part 1: Specification
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements
Bitumen and bituminous binders - Specifications for hard paving grade bitumens
Bitumen and bituminous binders - Specifications for paving grade bitumen
Bitumen and bituminous binders — Framework for specifying cationic bituminous emulsions
Bitumen and bituminous binders — Framework for specifying cut-back and fluxed bituminous binders
Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete
Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers
Bituminous mixtures - Material specifications - Part 3: Soft Asphalt
Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt
Bituminous mixtures - Material specifications - Part 7: Porous Asphalt
Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
Building hardware - Single-axis hinges - Requirements and tests methods
Calcium aluminate cement - Composition, specifications and conformity criteria
Cement - Composition, specifications and conformity criteria for very low heat special cements
Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances
Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances
Chimneys - System chimneys with plastic flue liners- Requirements and test methods
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 10025-1:2004
EN 10088-4:2009
EN 10088-5:2009
EN 10210-1:2006
EN 10219-1:2006
EN 1057:2006+A1:2010 (art 46)
EN 1090-1:2009+A1:2011
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
EN 1125:2008 (art 46)
EN 12101-10:2005 (art 46)
EN 12101-10:2005/AC:2007 (art 46)
EN 12101-10:2005/AC:2007 Smoke and heat control systems - Part 10: Power supplies
EN 12101-1:2005 (art 46)
EN 12101-1:2005/A1:2006 (art 46)
EN 12101-1:2005/A1:2006 - Smoke and heat control systems - Part 1: Specification for smoke barriers
EN 12101-2:2003 (art 46)
EN 12101-3:2015 (art 46)
EN 12101-6:2005 (art 46)
EN 12101-6:2005/AC:2006 (art 46)
EN 12101-6:2005/AC:2006 Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits
EN 12101-7:2011 (art 46)
EN 12101-8:2011 (art 46)
EN 12209:2003 (art 46)
EN 12209:2003/AC:2005 Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
EN 12209:2003/AC:2005 (art 46)
EN 12285-2:2005 (art 46)
EN 12591:2009
EN 12602:2016
EN 12620:2002+A1:2008
EN 12843:2004
EN 12878:2005
EN 12878:2005/AC:2006
EN 12878:2005/AC:2006 Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
EN 12899-1:2007 (art 46)
EN 12899-2:2007 (art 46)
EN 13043:2002
EN 13043:2002/AC:2004
EN 13043:2002/AC:2004 - Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
EN 13055-1:2002
EN 13055-1:2002/AC:2004
EN 13055-1:2002/AC:2004 Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
EN 13055-2:2004
EN 13084-5:2005
EN 13084-5:2005/AC:2006
EN 13084-5:2005/AC:2006 Free-standing chimneys - Part 5: Material for brick liners - Product specifications
EN 13084-7:2012
EN 13084-7:2012 Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
EN 13108-1:2006
EN 13108-1:2006/AC:2008
EN 13108-1:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete
EN 13108-2:2006
EN 13108-2:2006/AC:2008
EN 13108-2:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers
EN 13108-3:2006
EN 13108-3:2006/AC:2008
EN 13108-3:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 3: Soft Asphalt
EN 13108-4:2006
EN 13108-4:2006/AC:2008
EN 13108-4:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
EN 13108-5:2006
EN 13108-5:2006/AC:2008
EN 13108-5:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
EN 13108-6:2006
EN 13108-6:2006/AC:2008
EN 13108-6:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt
EN 13108-7:2006
EN 13108-7:2006/AC:2008
EN 13108-7:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 7: Porous Asphalt
EN 13139:2002
EN 13139:2002/AC:2004
EN 13139:2002/AC:2004 Aggregates for mortar
EN 1317-5:2007+A2:2012 Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
EN 1317-5:2007+A2:2012 (art 46)
EN 1317-5:2007+A2:2012/AC:2012 (art 46)
EN 1317-5:2007+A2:2012/AC:2012 Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
EN 13224:2011
EN 13224:2011 Precast concrete products - Ribbed floor elements
EN 13225:2013
EN 13241:2003+A2:2016 (art 46)
EN 13242:2002+A1:2007
EN 13249:2016
EN 13250:2016
EN 13251:2016
EN 13252:2016
EN 13253:2016
EN 13254:2016
EN 13255:2016
EN 13256:2016
EN 13257:2016
EN 13263-1:2005+A1:2009 Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
EN 13263-1:2005+A1:2009 (art 46)
EN 13265:2016
EN 13361:2004
EN 13361:2004/A1:2006
EN 13361:2004/A1:2006 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
EN 13362:2005
EN 1337-3:2005 (art 46)
EN 1337-4:2004 (art 46)
EN 1337-4:2004/AC:2007
EN 1337-4:2004/AC:2007 (art 46)
EN 13383-1:2002
EN 13383-1:2002/AC:2004
EN 13383-1:2002/AC:2004 Armourstone - Part 1: Specification
EN 13450:2002
EN 13450:2002/AC:2004
EN 13450:2002/AC:2004 Aggregates for railway ballast
EN 13454-1:2004 (art 46)
EN 13491:2004
EN 13491:2004/A1:2006
EN 13491:2004/A1:2006 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
EN 13492:2004
EN 13492:2004/A1:2006
EN 13492:2004/A1:2006 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
EN 13493:2005
EN 13693:2004+A1:2009
EN 13693:2004+A1:2009 Precast concrete products - Special roof elements
EN 13707:2004+A2:2009
EN 13707:2004+A2:2009 (art 46)
EN 13707:2004+A2:2009 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
EN 13747:2005+A2:2010
EN 13808:2013
EN 13813:2002 (art 46)
EN 13859-1:2010 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
EN 13859-1:2010 (art 46)
EN 13859-2:2010 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
EN 13859-2:2010 (art 46)
EN 13924:2006
EN 13924:2006/AC:2006
EN 13924:2006/AC:2006 Bitumen and bituminous binders - Specifications for hard paving grade bitumens
EN 13956:2012
EN 13956:2012 Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
EN 13956:2012 (art 46)
EN 13967:2012
EN 13967:2012 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
EN 13967:2012 (art 46)
EN 13969:2004
EN 13969:2004 (art 46)
EN 13969:2004/A1:2006
EN 13969:2004/A1:2006 (art 46)
EN 13969:2004/A1:2006 Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
EN 13970:2004 (art 46)
EN 13970:2004/A1:2006 (art 46)
EN 13970:2004/A1:2006 Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
EN 13984:2013 (art 46)
EN 13984:2013 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
EN 13986:2004+A1:2015
EN 13986:2004+A1:2015 (art 46)
EN 14023:2010
EN 14023:2010 Bitumen and bituminous binders - Specification framework for polymer modified bitumens
EN 14041:2004 (art 46)
EN 14041:2004/AC:2006 (art 46)
EN 14081-1:2005+A1:2011
EN 14081-1:2005+A1:2011 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
EN 14216:2015 (art 46)
EN 14250:2010
EN 14351-1:2006+A2:2016 (art 46)
EN 14399-1:2015
EN 14471:2013+A1:2015
EN 14471:2013+A1:2015 (art 46)
EN 14647:2005 (art 46)
EN 14647:2005/AC:2006 (art 46)
EN 14647:2005/AC:2006 Calcium aluminate cement - Composition, specifications and conformity criteria
EN 14695:2010
EN 14800:2007 (art 46)
EN 14800:2007 - Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
EN 14844:2006+A2:2011
EN 14844:2006+A2:2011 Precast concrete products - Box culverts
EN 14889-1:2006 (art 46)
EN 14889-2:2006 (art 46)
EN 14909:2012 Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
EN 14909:2012 (art 46)
EN 14989-1:2007
EN 14989-2:2007
EN 14991:2007
EN 14992:2007+A1:2012
EN 14992:2007+A1:2012 Precast concrete products - Wall elements
EN 1504-2:2004
EN 1504-2:2004 (art 46)
EN 1504-3:2005
EN 1504-3:2005 (art 46)
EN 1504-4:2004
EN 1504-4:2004 (art 46)
EN 1504-5:2004
EN 1504-6:2006
EN 1504-6:2006 (art 46)
EN 1504-7:2006
EN 15048-1:2007
EN 15069:2008 (art 46)
EN 15088:2005
EN 15129:2009 (art 46)
EN 15167-1:2006 (art 46)
EN 15285:2008 (art 46)
EN 15285:2008/AC:2008 (art 46)
EN 15285:2008/AC:2008 - Agglomerated stone - Modular tiles for flooring and stairs (internal and external)
EN 15322:2013
EN 15650:2010 (art 46)
EN 15651-1:2012 (art 46)
EN 15651-2:2012 (art 46)
EN 15651-3:2012 (art 46)
EN 15651-4:2012 (art 46)
EN 15814:2011+A2:2014 (art 46)
EN 16034:2014 (art 46)
EN 179:2008 (art 46)
EN 1856-1:2009
EN 1856-1:2009 Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 1856-2:2009
EN 1856-2:2009 Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes
EN 1935:2002 (art 46)
EN 1935:2002/AC:2003 (art 46)
EN 1935:2002/AC:2003 Building hardware - Single-axis hinges - Requirements and test methods
EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 197-1:2011 (art 46)
EN 295-1:2013 (art 46)
EN 295-5:2013 (art 46)
EN 295-7:2013 (art 46)
EN 331:1998 (art 46)
EN 331:1998/A1:2010 (art 46)
EN 331:1998/A1:2010 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
EN 40-4:2005 (art 46)
EN 40-4:2005/AC:2006 (art 46)
EN 40-4:2005/AC:2006 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
EN 40-5:2002 (art 46)
EN 40-6:2002 (art 46)
EN 40-7:2002 (art 46)
EN 413-1:2011 Masonry cement - Part 1: Composition, specifications and conformity criteria
EN 413-1:2011 (art 46)
EN 450-1:2012 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
EN 450-1:2012 (art 46)
EN 459-1:2010
EN 459-1:2010 Building lime - Part 1: Definitions, specifications and conformity criteria
EN 50575:2014/A1:2016 (art 46)
EN 54-10:2002 (art 46)
EN 54-10:2002/A1:2005 (art 46)
EN 54-10:2002/A1:2005 - Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors
EN 54-11:2001 (art 46)
EN 54-11:2001/A1:2005 (art 46)
EN 54-11:2001/A1:2005 - Fire detection and fire alarm systems - Part 11: Manual call points
EN 54-12:2002 (art 46)
EN 54-12:2015 (art 46)
EN 54-16:2008 (art 46)
EN 54-17:2005 (art 46)
EN 54-17:2005/AC:2007 (art 46)
EN 54-17:2005/AC:2007 - Fire detection and fire alarm systems - Part 17: Short-circuit isolators
EN 54-18:2005 (art 46)
EN 54-18:2005/AC:2007 (art 46)
EN 54-18:2005/AC:2007 - Fire detection and fire alarm systems - Part 18: Input/output devices
EN 54-20:2006 (art 46)
EN 54-20:2006/AC:2008 (art 46)
EN 54-20:2006/AC:2008 Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
EN 54-21:2006 (art 46)
EN 54-23:2010 (art 46)
EN 54-24:2008 (art 46)
EN 54-25: 2008/AC:2012 Fire detection and fire alarm systems - Part 25: Components using radio links
EN 54-25:2008 (art 46)
EN 54-25:2008/AC:2012 (art 46)
EN 54-2:1997 (art 46)
EN 54-2:1997/A1:2006 (art 46)
EN 54-2:1997/A1:2006 - Fire detection and fire alarm systems - Part 2: Control and indicating equipment
EN 54-2:1997/AC:1999 (art 46)
EN 54-2:1997/AC:1999 - Fire detection and fire alarm systems - Part 2: Control and indicating equipment
EN 54-3:2001/A1:2002 (art 46)
EN 54-3:2001/A2:2006 (art 46)
EN 54-4:1997 (art 46)
EN 54-4:1997/A1:2002 (art 46)
EN 54-4:1997/A2:2006 (art 46)
EN 54-4:1997/A2:2006 Fire detection and fire alarm systems - Part 4: Power supply equipment
EN 54-4:1997/AC:1999 (art 46)
EN 54-5:2000/A1:2002 (art 46)
EN 54-7:2000/A1:2002 (art 46)
EN 54-7:2000/A2:2006 (art 46)
EN 54-7:2000/A2:2006 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization
EN 671-1:2012 Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
EN 671-1:2012 (art 46)
EN 671-2:2012 Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
EN 671-2:2012 (art 46)
EN 771-1:2011+A1:2015
EN 771-2:2011+A1:2015
EN 771-3:2011+A1:2015
EN 771-4:2011+A1:2015
EN 771-5:2011+A1:2015
EN 771-6:2011+A1:2015
EN 934-2:2009+A1:2012
EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
EN 934-3:2009+A1:2012
EN 934-3:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
EN 934-4:2009
EN 934-4:2009 Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
EN 934-5:2007
EN 998-2:2016
Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity
Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors
Fire detection and fire alarm systems - Part 11: Manual call points
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors - Line detectors using an optical beam
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam
Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
Fire detection and fire alarm systems - Part 17: Short-circuit isolators
Fire detection and fire alarm systems - Part 18: Input/output devices
Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment
Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices
Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers
Fire detection and fire alarm systems - Part 25: Components using radio links
Fire detection and fire alarm systems - Part 2: Control and indicating equipment
Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders
Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders.
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 5: Heat detectors - Point detectors
Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization
Fixed, vertical road traffic signs - Part 1: Fixed signs
Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics
Free-standing chimneys - Part 5: Material for brick liners - Product specifications
Geosynthetic Barriers - Characteristics required for use in the construction of canals
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion).
Geotextiles and geotextile-related products — Characteristics required for the use in the construction of reservoirs and dams
Geotextiles and geotextile-related products — Characteristics required for use in drainage systems
Geotextiles and geotextile-related products — Characteristics required for use in earthworks, foundations and retaining structures
Geotextiles and geotextile-related products — Characteristics required for use in erosion control works (coastal protection, bank revetments)
Geotextiles and geotextile-related products — Characteristics required for use in liquid waste containment projects
Geotextiles and geotextile-related products — Characteristics required for use in solid waste disposals
Geotextiles and geotextile-related products — Characteristics required for use in the construction of canals
Geotextiles and geotextile-related products — Characteristics required for use in the construction of railways
Geotextiles and geotextile-related products — Characteristics required for use in the construction of tunnels and underground structures
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
High-strength structural bolting assemblies for preloading - Part 1: General requirements
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
Hot rolled products of structural steels - Part 1: General technical delivery conditions
Industrial, commercial, garage doors and gates - Product standard, performance characteristics
Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
Lighting columns - Part 5: Requirements for steel lighting columns
Lighting columns - Part 6: Requirements for aluminium lighting columns
Lighting columns -Part 7: Requirements for fibre reinforced polymer composite lighting columns
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
Non-preloaded structural bolting assemblies - Part 1: General requirements
Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
Polymer modified bituminous thick coatings for waterproofing-Definitions and requirements
Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire requirements
Precast concrete products - Floor plates for floor systems
Precast concrete products - Foundation elements
Precast concrete products - Masts and poles
Precast concrete products — Linear structural elements
Prefabricated reinforced components of autoclaved aerated concrete.
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
Resilient, textile and laminate floor coverings - Essential characteristics
Resilient, textile and laminate floor coverings - Essential characteristics
Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
Screed material and floor screeds - Screed materials - Properties and requirements
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkway
Smoke and heat control systems - Part 10: Power supplies
Smoke and heat control systems - Part 1: Specification for smoke barriers
Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators
Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits
Smoke and heat control systems - Part 7: Smoke duct sections
Smoke and heat control systems - Part 8: Smoke control dampers
Specification for masonry units - Part 6: Natural stone masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 2: Calcium silicate masonry units
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 5: Manufactured stonemasonry units
Specification for mortar for masonry - Part 2: Masonry mortar
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
Structural bearings - Part 3: Elastomeric bearings
Structural bearings - Part 4: Roller bearings
Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
Ventilation for buildings - Fire dampers
Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints
Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for perforated pipes and fittings
Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
Wood-based panels for use in construction- Characteristics, evaluation of conformity and marking
Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=2765

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.