Fire certification and inspection Ltd.

🇧🇬 Bulgaria · Sofia Suspended

www.firecert.eu

Designations

CPR Construction products · Regulation (EU) No 305/2011 Suspended

Designated since2021-11-17

Full scope text from the register

Product families

Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
Curtain wallings (1/1)
Structural timber products (1/3)
Structural timber products (2/3)
Wood-based panels (1/2)
Wood-based panels (2/2)
Masonry and related products (1/3)
Floorings (2/2)
Internal partition kits (1/5)
Internal and external wall and ceiling finishes (3/5)
Membranes (2/3)
Thermal insulating products (2/2)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)
Fire stopping, fire sealing and fire protection products (1/2)
Flat glass, profiled glass and glass-block products (1/6)
Flat glass, profiled glass and glass-block products (4/6)
Kits for exterior wall claddings (2/2)
Power, control and communication cables (1/3)
Roof coverings, rooflights, roof windows and ancillary products (2/6)
Roof coverings, rooflights, roof windows and ancillary products (2/6)

Functions

Product Certification Body
FPC Certification Body

Intended use

for structural elements in internal or external applications
in walls, columns and partitions
fire/smoke compartmentation and on escape routes
for uses subject to reaction to fire requirements
bridges, railtracks and buildings
for non structural elements in internal or external applications
for bridges and buildings
for uses subject to regulations on reaction to fire
for structural elements in internal or external application
for use in a glazed assembly intended specifically to provide fire resistance
for use as anti-bullet, or anti-explosion glazing
as internal or external finishes in walls or ceilings subject to reaction to fire regulations
for internal uses
for fire compartmentation and/or fire protection or fire performance
as internal or external finishes in ceilings subject to reaction to fire regulations
as external finishes in walls or ceilings subject to reaction to fire regulations
as external walls subject to reaction to fire requirements
fire safety
for internal uses including enclosed public transport premises
for uses subject to reaction to fire regulations
as internal finishes in walls or ceilings subject to reaction to fire regulations

Standards

Agglomerated stone - Modular tiles for flooring and stairs (internal and external)
Agglomerated stone — Slabs and tiles for wall finishes (internal and external)
Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
Building hardware - Controlled door closing devices - Requirement and test methods
Building hardware - Door coordinator devices - Requirements and test methods
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods
Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
Building hardware - Single-axis hinges - Requirements and tests methods
Coated metal water stop sheet for construction and controlled crack joints in waterproof concrete
Curtain walling - Product standard
EAD 020011-00-0405
EAD 020029-00-1102
EAD 030218-00-0402
EAD 090001-00-0404
EAD 210005-00-0505
EAD 320002-02-0605
EAD 350003-00-1109
EAD 350005-00-1104
EAD 350022-01-1107
EAD 350140-00-1106
EAD 350141-00-1106
EAD 350142-00-1106
EAD 350402-00-1106
EAD 350454-00-1104
EN 1013:2012+A1:2014
EN 1036-2:2008
EN 1096-4:2018
EN 1125:2008
EN 1154:1996/A1:2002
EN 1154:1996/A1:2002/AC:2006
EN 1154:1996/A1:2002/AC:2006 Building hardware - Controlled door closing devices - Requirements and test methods
EN 1155:1996/A1:2002/AC:2006
EN 1155:1996/A1:2002/AC:2006 Building hardware - Electrically powered hold-open devices for swin doors - Requirements and test methods
EN 1155:1997/A1:2002
EN 1158:1997/A1:2002
EN 1158:1997/A1:2002/AC:2006
EN 1158:1997/A1:2002/AC:2006 - Building hardware - Door coordinator devices - Requirements and test methods
EN 12094-10:2003
EN 12094-11:2003
EN 12094-12:2003
EN 12094-13:2001
EN 12094-13:2001/AC:2002
EN 12094-13:2001/AC:2002 Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves
EN 12094-1:2003
EN 12094-2:2003
EN 12094-3:2003
EN 12094-4:2004
EN 12094-5:2006
EN 12094-5:2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems
EN 12094-6:2006
EN 12094-6:2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices for CO2 systems
EN 12094-7:2000
EN 12094-7:2000/A1:2005
EN 12094-8:2006
EN 12094-9:2003
EN 12101-10:2005
EN 12101-10:2005/AC:2007
EN 12101-10:2005/AC:2007 Smoke and heat control systems - Part 10: Power supplies
EN 12101-1:2005
EN 12101-1:2005/A1:2006
EN 12101-1:2005/A1:2006 - Smoke and heat control systems - Part 1: Specification for smoke barriers
EN 12101-2:2003
EN 12101-3:2002
EN 12101-3:2002/AC:2005
EN 12101-3:2015
EN 12101-6:2005
EN 12101-6:2005/AC:2006
EN 12101-6:2005/AC:2006 Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits
EN 12101-7:2011
EN 12101-8:2011
EN 12150-2:2004
EN 12209:2003
EN 12209:2003/AC:2005
EN 12209:2003/AC:2005 Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
EN 12259-1:1999 + A1:2001
EN 12259-1:1999 + A1:2001/A3:2006 - Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers
EN 12259-1:1999+A1:01/A2:04
EN 12259-1:1999+A1:01/A3:06
EN 12259-2:1999/A1:2001
EN 12259-2:1999/A2:2005
EN 12259-2:1999/A2:2005 - Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies
EN 12259-2:1999/AC:2002
EN 12259-3:2000/A1:2001
EN 12259-3:2000/A2:2005
EN 12259-3:2000/A2:2005 - Fixed firefighting systems - Components for automatic sprinkler and water spray systems - Part 3: Dry alarm valve assemblies
EN 12259-4:2000/A1:2001
EN 12259-5:2002
EN 12337-2:2004
EN 12467:2012+A2:2018
EN 1279-5:2018
EN 13024-2:2004
EN 13162:2012+A1:2015
EN 13163:2012+A1:2015
EN 13164:2012+A1:2015
EN 13165:2012+A2:2016
EN 13166:2012+A2:2016
EN 13167:2012+A1:2015
EN 13168:2012+A1:2015
EN 13169:2012+A1:2015
EN 13170:2012+A1:2015
EN 13171:2012+A1:2015
EN 13241:2003+A2:2016
EN 13245-2:2008
EN 13245-2:2008/AC:2009
EN 13245-2:2008/AC:2009 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
EN 13707:2004+A2:2009
EN 13707:2004+A2:2009 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
EN 13830:2003
EN 13859-1:2010
EN 13859-1:2010 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
EN 13859-2:2010
EN 13859-2:2010 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
EN 13964:2014
EN 13970:2004
EN 13970:2004/A1:2006
EN 13970:2004/A1:2006 Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
EN 13984:2013
EN 13984:2013 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
EN 13986:2004+A1:2015
EN 14041:2004
EN 14041:2004/AC:2006
EN 14063-1:2004
EN 14063-1:2004/AC:2006
EN 14063-1:2004/AC:2006 Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation
EN 14064-1:2010
EN 14080:2013
EN 14081-1:2005+A1:2011
EN 14081-1:2005+A1:2011 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
EN 14178-2:2004
EN 14179-2:2005
EN 14250:2010
EN 14303:2009+A1:2013
EN 14303:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification
EN 14304:2009+A1:2013
EN 14304:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification
EN 14305:2009+A1:2013
EN 14305:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification
EN 14306:2009+A1:2013
EN 14306:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification
EN 14307:2009+A1:2013
EN 14307:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification
EN 14308:2009+A1:2013
EN 14308:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification
EN 14309:2009+A1:2013
EN 14309:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification
EN 14313:2009+A1:2013
EN 14313:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
EN 14314:2009+A1:2013
EN 14314:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification
EN 14315-1:2013
EN 14318-1:2013
EN 14319-1:2013
EN 14320-1:2013
EN 14321-2:2005
EN 14339:2005
EN 14342:2013
EN 14351-1:2006+A2:2016
EN 14374:2004
EN 14384:2005
EN 14411:2012
EN 14411:2012 Ceramic tiles - Definitions, classification, characteristics, evaluation of conformity and marking
EN 14449:2005
EN 14449:2005/AC:2005
EN 14449:2005/AC:2005 - Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
EN 14509:2013
EN 14604:2005
EN 14604:2005/AC:2008
EN 14604:2005/AC:2008 Smoke alarm devices
EN 14716:2004
EN 14846:2008
EN 14904:2006
EN 14915:2013
EN 14933:2007
EN 14933:2007 - Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification
EN 14934:2007
EN 14934:2007 - Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification
EN 15102:2007+A1:2011
EN 15102:2007+A1:2011 Decorative wall coverings - Roll and panel form
EN 15285:2008
EN 15285:2008/AC:2008
EN 15285:2008/AC:2008 - Agglomerated stone - Modular tiles for flooring and stairs (internal and external)
EN 15286:2013
EN 15497:2014
EN 15650:2010
EN 15681-2:2017
EN 15682-2:2013
EN 15683-2:2013
EN 16034:2014
EN 16069:2012+A1:2015
EN 16153:2013+A1:2015
EN 1748-1-2:2004
EN 1748-2-2:2004
EN 179:2008
EN 1863-2:2004
EN 1935:2002
EN 1935:2002/AC:2003
EN 1935:2002/AC:2003 Building hardware - Single-axis hinges - Requirements and test methods
EN 438-7:2005
EN 490: 2011
EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
EN 492:2012+A2:2018
EN 494:2012+A1:2015
EN 50575:2014/A1:2016
EN 54-10:2002
EN 54-10:2002/A1:2005
EN 54-10:2002/A1:2005 - Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors
EN 54-11:2001
EN 54-11:2001/A1:2005
EN 54-11:2001/A1:2005 - Fire detection and fire alarm systems - Part 11: Manual call points
EN 54-12:2015
EN 54-16:2008
EN 54-17:2005
EN 54-17:2005/AC:2007
EN 54-17:2005/AC:2007 - Fire detection and fire alarm systems - Part 17: Short-circuit isolators
EN 54-18:2005
EN 54-18:2005/AC:2007
EN 54-18:2005/AC:2007 - Fire detection and fire alarm systems - Part 18: Input/output devices
EN 54-20:2006
EN 54-20:2006/AC:2008
EN 54-20:2006/AC:2008 Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
EN 54-21:2006
EN 54-23:2010
EN 54-24:2008
EN 54-25: 2008/AC:2012 Fire detection and fire alarm systems - Part 25: Components using radio links
EN 54-25:2008
EN 54-25:2008/AC:2012
EN 54-2:1997
EN 54-2:1997/A1:2006
EN 54-2:1997/A1:2006 - Fire detection and fire alarm systems - Part 2: Control and indicating equipment
EN 54-2:1997/AC:1999
EN 54-2:1997/AC:1999 - Fire detection and fire alarm systems - Part 2: Control and indicating equipment
EN 54-3:2001/A1:2002
EN 54-3:2001/A2:2006
EN 54-4:1997
EN 54-4:1997/A1:2002
EN 54-4:1997/A2:2006
EN 54-4:1997/A2:2006 Fire detection and fire alarm systems - Part 4: Power supply equipment
EN 54-4:1997/AC:1999
EN 54-5:2017+A1:2018
EN 54-7:2000/A1:2002
EN 54-7:2000/A2:2006
EN 54-7:2000/A2:2006 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization
EN 54-7:2018
EN 572-9:2004
EN 671-1:2012
EN 671-1:2012 Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
EN 671-2:2012
EN 671-2:2012 Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
EN 771-1:2011+A1:2015
EN 771-2:2011+A1:2015
EN 771-3:2011+A1:2015
EN 771-4:2011+A1:2015
EN 771-5:2011+A1:2015
EN 771-6:2011+A1:2015
EN 998-2:2016
Fibre-cement flat sheets - Product specification and test methods
Fibre-cement profiled sheets and fittings - Product specification and test methods
Fibre-cement slates and fittings - Product specification and test methods
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors
Fire detection and fire alarm systems - Part 11: Manual call points
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam
Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
Fire detection and fire alarm systems - Part 17: Short-circuit isolators
Fire detection and fire alarm systems - Part 18: Input/output devices
Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment
Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices
Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers
Fire detection and fire alarm systems - Part 25: Components using radio links
Fire detection and fire alarm systems - Part 2: Control and indicating equipment
Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders
Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders.
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 5: Heat detectors - point heat detectors
Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization
Fire detection and fire alarm systems - part 7: Smoke detectors - Point smoke detectors that operate using scattered light, transmitted light or ionization
Fire protective board, slab and mat products and kits
Fire stopping and fire sealing products - Penetration seals
Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches
Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves
Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators
Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO2 systems
Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO2 systems
Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors
Fixed firefighting systems components for sprinkler and waterspray systems - Part 1:Sprinklers
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
Glass in Building - Basic alumino silicate glass products - Part 2: Product standard
Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Insulating glass units - Part 5: Product standard
Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity
product standard
Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - coated glass - Part 4: Product standard
Glass in building — Heat soaked thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard
Glass in building — Thermally toughened soda lime silicate channel shaped safety glass — Part 2: Evaluation of conformity/Product standard
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
Industrial, commercial, garage doors and gates - Product standard, performance characteristics
Internal partition kits for use as non-loadbearing walls (superseding technical specification “ETAG 003”)
Internal pedestrian fire resisting and/or smoke control single or double leaf doorsets made of steel
Intumescent products for fire sealing and fire stopping purposes
Kit for closure system for conveyor systems
Kit for fire resistant service ducts consisting of pre-fabricated connection pieces (made of mechanically pre-coated steel sheet) and accessories
Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings- Requirements and test methods
Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings- Requirements and test methods
Linear joint and gap seals
Membrane for use as roof underlay
Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
Pillar fire hydrants
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire requirements
Pre-fabricated compressed mineral wool boards with organic or inorganic finish and with specified fastening system
Reactive coatings for fire protection of steel elements
Renderings and rendering kits intended for fire resistant applications
Resilient, textile and laminate floor coverings - Essential characteristics
Resilient, textile and laminate floor coverings - Essential characteristics
Roof, floor, wall and ceiling hatches providing access or for use as an emergency door / with or without fire resistance.
Self-supporting double skin metal faced insulating panels — Factory made products — Specifications
Smoke alarm devices
Smoke and heat control systems - Part 10: Power supplies
Smoke and heat control systems - Part 1: Specification for smoke barriers
Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators
Smoke and heat control systems - Part 3 : Specification for powered smoke and heat exhaust ventilators
Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators
Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits
Smoke and heat control systems - Part 7: Smoke duct sections
Smoke and heat control systems - Part 8: Smoke control dampers
Solid wood panelling and cladding — Characteristics, evaluation of conformity and marking
Specification for masonry units - Part 6: Natural stone masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 2: Calcium silicate masonry units
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 5: Manufactured stonemasonry units
Specification for mortar for masonry - Part 2: Masonry mortar
Stretched ceilings - Requirements and test methods
Structural finger jointed solid timber - Performance requirements and minimum production requirements
Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
Suspended ceilings - Requirements and test methods
Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam dispensed system before installation
Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam spray system before installation
Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation
Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam spray system before install
Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specifications
Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specifications
Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specifications
Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products specifications
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specifications
Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB)- Specifications
Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specifications
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specifications
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specifications
Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation
Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
Timber structures - Structural laminated veneer lumber - Requirements
Timber structures — Glued laminated timber and glued solid timber — Requirements
Underground fire hydrants
Ventilation for buildings - Fire dampers
Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
Wood flooring and parquet — Characteristics, evaluation of conformity and marking
Wood-based panels for use in construction- Characteristics, evaluation of conformity and marking

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=2918

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.