Közlekedéstudományi és Építésügyi Minőségellenőrző Intézet

🇭🇺 Hungary · Budapest Active

Designations

CPR Construction products · Regulation (EU) No 305/2011 Active

Designated since2026-06-22

Full scope text from the register

Product families

External thermal insulation composite systems/kits with rendering (ETICS)(1/1)
Fasteners for structural timber products (1/1)
Floorings (2/2)
Structural timber products (1/3)
Structural timber products (2/3)
Plastic anchors for use in concrete and masonry (1/1)
Waste water engineering products outside buildings (2/3)
Cements, building limes and other hydraulic binders
Internal partition kits (1/5)
Masonry and related products (1/3)
Masonry and related products (2/3)
Structural metallic products and ancillaries (1/4)
Structural metallic products and ancillaries (2/4)
Flat glass, profiled glass and glass-block products (1/6)
Flat glass, profiled glass and glass-block products (2/6)
Flat glass, profiled glass and glass-block products (3/6)
Flat glass, profiled glass and glass-block products (4/6)
Flat glass, profiled glass and glass-block products (5/6)
Precast normal/lightweight/autoclaved aerated concrete products (1/1)
Timber frame and log prefabricated building kits (1/1)
Products related to concrete, mortar and grout (1/2)
Products related to concrete, mortar and grout (2/2)
Construction adhesives (1/2)
Construction adhesives (2/2)
Roof coverings, rooflights, roof windows and ancillary products (1/6)
Roof coverings, rooflights, roof windows and ancillary products (2/6)
Roof coverings, rooflights, roof windows and ancillary products (3/6)
Roof coverings, rooflights, roof windows and ancillary products (6/6)
Aggregates for uses with high safety requirements (2/2)
Road construction products (1/2)
Prefabricated stair kits (1/2)
Thermal insulating products (1/2)
Thermal insulating products (2/2)
Geotextiles (1/2)
Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (1/6)
Kits for exterior wall claddings (1/2)
Power, control and communication cables (1/3)
Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1)
Membranes (1/3)
Membranes (2/3)
Circulation fixtures (1/2)
Circulation fixtures (2/2)
Curtain wallings (1/1)
Chimneys, flues and specific products (1/1)
Gypsum products (3/4)
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
Doors, windows, shutters, blinds, gates and related building hardware (1/1)

Functions

Product Certification Body
FPC Certification Body
Testing Laboratory

Intended use

as external walls subject to reaction to fire requirements
fire safety
in buildings, roads and other civil engineering work
any
for internal uses
for uses subject to resistance to fire regulations (e.g. fire compartmentation)
for uses subject to external fire performance regulations
chimneys
in walls and partitions
to be used in metal structures or in composite metal and concrete structures
as external walls not subject to reaction to fire requirements
for structural timber products
fire/smoke compartmentation and on escape routes
for structural use
for uses subject to reaction to fire requirements
for the construction of external and internal walls not subject to fire regulations, in buildings
for uses other than those specified in families (1/6), (2/6), (3/6), (4/6), (5/6)
in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal
for external walls or external finishes of walls
for other uses liable to present "safety-in-use" risks and subject to such regulations
for uses contributing to the load-bearing capacity of the structure
for other uses in buildings and civil engineering works
for uses in work's frames and foundations
for the construction of external and internal walls subject to fire regulations, in buildings
in buildings
for use in systems, such as facade systems, for fixing or supporting elements which contribute to the stability of the systems
for uses relating to energy conservation and/or noise reduction
for dwellings and other buildings
for stiffening timber-framed windload bearing walls or timber roof struss structures
in external wall not subject to fire regulations
for use in a glazed assembly intended specifically to provide fire resistance
for use as anti-bullet, or anti-explosion glazing
any other
other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use (i.e. NOT for fire/smoke compartmentation, NOT for escape routes)
in external wall subject to fire regulations
for internal uses including enclosed public transport premises
for concrete, mortar and grout
in building works
for bridges and buildings
for circulation areas
for road construction and surface treatment of roads
for internal and external uses in buildings and other civil engineering works
for uses subject to regulations on reaction to fire
bridges, railtracks and buildings
for uses subject to reaction to fire regulations
in walls, columns and partitions
preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products
to be used outside buildings, for waste water from buildings and civil engineering works including roads

Standards

Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling
Aggregates for concrete
Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
Aggregates for mortar
Aggregates for railway ballast
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
Armourstone - Part 1: Specification
CRM (Composite Reinforced Mortar) Systems for strengthening concrete and masonry structures
Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods
Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances
Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances
Chimneys - System chimneys with plastic flue liners- Requirements and test methods
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
Curtain walling - Product standard
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
EAD 040016-01-0404
EAD 040083-00-0404
EAD 040287-00-0404
EAD 090034-00-0404
EAD 130090-00-0303
EAD 130186-00-0603
EAD 140022-00-0304
EAD 170010-00-0305
EAD 210005-00-0505
EAD 230328-00-0108
EAD 260026-00-0301
EAD 330965-00-0601
EAD 340006-00-0506
EAD 340308-00-0203
EAD 340309-00-0305
EAD 340309-00-0305-v01
EAD 340392-00-0104
EN 10025-1:2004
EN 10088-4:2009
EN 10088-5:2009
EN 10210-1:2006
EN 10219-1:2006
EN 10340:2007
EN 10340:2007/AC:2008
EN 10340:2007/AC:2008 Steel casting for structural uses
EN 10343:2009
EN 1090-1:2009+A1:2011
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
EN 1168:2005+A3:2011
EN 1168:2005+A3:2011 Precast concrete products - Hollow core slabs
EN 12004:2007+A1:2012
EN 12004:2007+A1:2012 Adhesives for tiles - Requirements, evaluation of conformity, classification and designation
EN 12057:2004
EN 12058:2004
EN 12094-1:2003
EN 12094-3:2003
EN 12094-9:2003
EN 12101-10:2005
EN 12101-10:2005/AC:2007
EN 12101-10:2005/AC:2007 Smoke and heat control systems - Part 10: Power supplies
EN 12101-3:2002
EN 12101-3:2002/AC:2005
EN 12101-7:2011
EN 12150-2:2004
EN 12446:2011
EN 12446:2011 Chimneys - Components - Concrete outer wall elements
EN 12602:2016
EN 12620:2002+A1:2008
EN 12737:2004+A1:2007
EN 1279-5:2018
EN 12794:2005+A1:2007
EN 12794:2005+A1:2007 - Precast concrete products - Foundation piles
EN 12794:2005+A1:2007/AC:2008
EN 12794:2005+A1:2007/AC:2008 Precast concrete products - Foundation piles
EN 12843:2004
EN 13043:2002
EN 13043:2002/AC:2004
EN 13043:2002/AC:2004 - Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
EN 13055-1:2002
EN 13055-1:2002/AC:2004
EN 13055-1:2002/AC:2004 Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
EN 13055-2:2004
EN 13063-1:2005+A1:2007
EN 13063-1:2005+A1:2007 - Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance
EN 13063-2:2005+A1:2007
EN 13063-2:2005+A1:2007 - Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions
EN 13063-3:2007
EN 13063-3:2007 - Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys
EN 13069:2005
EN 13084-5:2005
EN 13084-5:2005/AC:2006
EN 13084-5:2005/AC:2006 Free-standing chimneys - Part 5: Material for brick liners - Product specifications
EN 13084-7:2012
EN 13084-7:2012 Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
EN 13139:2002
EN 13139:2002/AC:2004
EN 13139:2002/AC:2004 Aggregates for mortar
EN 13162:2012+A1:2015
EN 13163:2012+A1:2015
EN 13164:2012+A1:2015
EN 13165:2012+A2:2016
EN 13166:2012+A2:2016
EN 13167:2012+A1:2015
EN 13168:2012+A1:2015
EN 13169:2012+A1:2015
EN 13170:2012+A1:2015
EN 13171:2012+A1:2015
EN 13224:2011
EN 13224:2011 Precast concrete products - Ribbed floor elements
EN 13225:2013
EN 13241:2003+A2:2016
EN 13242:2002+A1:2007
EN 13249:2016
EN 13250:2016
EN 13251:2016
EN 13252:2016
EN 13253:2016
EN 13254:2016
EN 13255:2016
EN 13256:2016
EN 13257:2016
EN 13265:2016
EN 13361:2004
EN 13361:2004/A1:2006
EN 13361:2004/A1:2006 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
EN 13362:2005
EN 13383-1:2002
EN 13383-1:2002/AC:2004
EN 13383-1:2002/AC:2004 Armourstone - Part 1: Specification
EN 13450:2002
EN 13450:2002/AC:2004
EN 13450:2002/AC:2004 Aggregates for railway ballast
EN 13491:2004
EN 13491:2004/A1:2006
EN 13491:2004/A1:2006 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
EN 13492:2004
EN 13492:2004/A1:2006
EN 13492:2004/A1:2006 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
EN 13493:2005
EN 13693:2004+A1:2009
EN 13693:2004+A1:2009 Precast concrete products - Special roof elements
EN 13707:2004+A2:2009
EN 13707:2004+A2:2009 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
EN 13747:2005+A2:2010
EN 13813:2002
EN 13830:2003
EN 13859-1:2010
EN 13859-1:2010 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
EN 13859-2:2010
EN 13859-2:2010 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
EN 13956:2012
EN 13956:2012 Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
EN 13967:2012
EN 13967:2012 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
EN 13969:2004
EN 13969:2004/A1:2006
EN 13969:2004/A1:2006 Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
EN 13970:2004
EN 13970:2004/A1:2006
EN 13970:2004/A1:2006 Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
EN 13978-1:2005
EN 13984:2013
EN 13984:2013 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
EN 14041:2004
EN 14041:2004/AC:2006
EN 14063-1:2004
EN 14063-1:2004/AC:2006
EN 14063-1:2004/AC:2006 Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation
EN 14080:2013
EN 14081-1:2005+A1:2011
EN 14081-1:2005+A1:2011 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
EN 14250:2010
EN 14303:2009+A1:2013
EN 14303:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification
EN 14316-1:2004
EN 14317-1:2004
EN 1433:2002
EN 1433:2002/A1:2005
EN 14342:2013
EN 14351-1:2006+A2:2016
EN 14374:2004
EN 14388:2005
EN 14388:2005/AC:2008
EN 14388:2005/AC:2008 - Road traffic noise reducing devices - Specifications
EN 14449:2005
EN 14449:2005/AC:2005
EN 14449:2005/AC:2005 - Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
EN 14471:2013+A1:2015
EN 14509:2013
EN 14545:2008
EN 1457-1:2012
EN 1457-1:2012 Chimneys - Clay/Ceramic Flue Liners – Part 1: Flue liners operating under dry conditions - Requirements and test methods
EN 1457-2:2012
EN 1457-2:2012 Chimneys - Clay/Ceramic Flue Liners - Part 2: Flue liners operating under wet conditions -Requirements and test methods
EN 14604:2005
EN 14604:2005/AC:2008
EN 14604:2005/AC:2008 Smoke alarm devices
EN 14843:2007
EN 14843:2007 - Precast concrete products - Stairs
EN 14844:2006+A2:2011
EN 14844:2006+A2:2011 Precast concrete products - Box culverts
EN 14891:2012
EN 14891:2012/AC:2012
EN 14891:2012/AC:2012 Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation
EN 14904:2006
EN 14989-1:2007
EN 14989-2:2007
EN 14991:2007
EN 14992:2007+A1:2012
EN 14992:2007+A1:2012 Precast concrete products - Wall elements
EN 15037-1:2008
EN 15037-2:2009+A1:2011
EN 15037-3:2009+A1:2011
EN 15037-4:2010+A1:2013
EN 1504-2:2004
EN 1504-3:2005
EN 1504-4:2004
EN 1504-5:2004
EN 1504-6:2006
EN 1504-7:2006
EN 15050:2007+A1:2012
EN 15050:2007+A1:2012 Precast concrete products - Bridge elements
EN 15088:2005
EN 1520:2011
EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
EN 15258:2008
EN 16034:2014
EN 1806:2006
EN 1856-1:2009
EN 1856-1:2009 Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 1856-2:2009
EN 1856-2:2009 Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes
EN 1857:2010
EN 1857:2010 Chimneys - Components - Concrete flue liners
EN 1858:2008+A1:2011
EN 1858:2008+A1:2011 Chimneys - Components - Concrete flue blocks
EN 40-5:2002
EN 40-6:2002
EN 459-1:2010
EN 459-1:2010 Building lime - Part 1: Definitions, specifications and conformity criteria
EN 50575:2014/A1:2016
EN 520:2004+A1:2009
EN 520:2004+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods
EN 54-10:2002
EN 54-10:2002/A1:2005
EN 54-10:2002/A1:2005 - Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors
EN 54-11:2001
EN 54-11:2001/A1:2005
EN 54-11:2001/A1:2005 - Fire detection and fire alarm systems - Part 11: Manual call points
EN 54-12:2015
EN 54-16:2008
EN 54-17:2005
EN 54-17:2005/AC:2007
EN 54-17:2005/AC:2007 - Fire detection and fire alarm systems - Part 17: Short-circuit isolators
EN 54-18:2005
EN 54-18:2005/AC:2007
EN 54-18:2005/AC:2007 - Fire detection and fire alarm systems - Part 18: Input/output devices
EN 54-20:2006
EN 54-20:2006/AC:2008
EN 54-20:2006/AC:2008 Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
EN 54-21:2006
EN 54-23:2010
EN 54-25: 2008/AC:2012 Fire detection and fire alarm systems - Part 25: Components using radio links
EN 54-25:2008
EN 54-25:2008/AC:2012
EN 54-2:1997
EN 54-2:1997/A1:2006
EN 54-2:1997/A1:2006 - Fire detection and fire alarm systems - Part 2: Control and indicating equipment
EN 54-2:1997/AC:1999
EN 54-2:1997/AC:1999 - Fire detection and fire alarm systems - Part 2: Control and indicating equipment
EN 54-3:2001
EN 54-3:2001/A1:2002
EN 54-3:2001/A2:2006
EN 54-4:1997
EN 54-4:1997/A1:2002
EN 54-4:1997/A2:2006
EN 54-4:1997/A2:2006 Fire detection and fire alarm systems - Part 4: Power supply equipment
EN 54-4:1997/AC:1999
EN 54-5:2017+A1:2018
EN 54-7:2018
EN 771-1:2011+A1:2015
EN 771-2:2011+A1:2015
EN 771-3:2011+A1:2015
EN 771-4:2011+A1:2015
EN 771-5:2011+A1:2015
EN 771-6:2011+A1:2015
EN 845-2:2013+A1:2016
EN 934-2:2009+A1:2012
EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
EN 934-3:2009+A1:2012
EN 934-3:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
EN 934-4:2009
EN 934-4:2009 Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
EN 934-5:2007
EN 998-2:2016
External Thermal Insulation Composite Systems (ETICS) with renderings (superseding technical specification “ETAG 004”)
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors
Fire detection and fire alarm systems - Part 11: Manual call points
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam
Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
Fire detection and fire alarm systems - Part 17: Short-circuit isolators
Fire detection and fire alarm systems - Part 18: Input/output devices
Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment
Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices
Fire detection and fire alarm systems - Part 25: Components using radio links
Fire detection and fire alarm systems - Part 2: Control and indicating equipment
Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders
Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders.
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 4: Power supply equipment
Fire detection and fire alarm systems - Part 5: Heat detectors - point heat detectors
Fire detection and fire alarm systems - part 7: Smoke detectors - Point smoke detectors that operate using scattered light, transmitted light or ionization
Fire detection and fire alarm systems — Part 3: Fire alarm devices — Sounders
Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
Free-standing chimneys - Part 5: Material for brick liners - Product specifications
Geosynthetic Barriers - Characteristics required for use in the construction of canals
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion).
Geotextiles and geotextile-related products — Characteristics required for the use in the construction of reservoirs and dams
Geotextiles and geotextile-related products — Characteristics required for use in drainage systems
Geotextiles and geotextile-related products — Characteristics required for use in earthworks, foundations and retaining structures
Geotextiles and geotextile-related products — Characteristics required for use in erosion control works (coastal protection, bank revetments)
Geotextiles and geotextile-related products — Characteristics required for use in liquid waste containment projects
Geotextiles and geotextile-related products — Characteristics required for use in solid waste disposals
Geotextiles and geotextile-related products — Characteristics required for use in the construction of canals
Geotextiles and geotextile-related products — Characteristics required for use in the construction of railways
Geotextiles and geotextile-related products — Characteristics required for use in the construction of tunnels and underground structures
Glass fibre mesh for reinforcement of cementitious or cement-based renderings
Glass in building - Insulating glass units - Part 5: Product standard
Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
Hot rolled products of structural steels - Part 1: General technical delivery conditions
Industrial, commercial, garage doors and gates - Product standard, performance characteristics
Internal partition kits for use as non-loadbearing walls (superseding technical specification “ETAG 003”)
Kit composed by subframe and fixings for fastening cladding and external wall elements
Kits for external thermal insulation composite system (ETICS) with panels as thermal insulation product and discontinuous claddings as exterior skin
Lighting columns - Part 5: Requirements for steel lighting columns
Lighting columns - Part 6: Requirements for aluminium lighting columns
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation
Natural stone products - Modular tiles - Requirements
Natural stone products - Slabs for floors and stairs - Requirements
Non load-bearing permanent shuttering kits/systems based on hollow blocks or panels of insulating materials and sometimes concrete (superseding technical specification ‘ETAG 009’)
Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
Polystyrene concrete masonry units and wall kits made from the units
Powder actuated fastener for the fixing of ETICS in concrete
Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire requirements
Precast concrete products - Floor slats for livestock
Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks
Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks
Precast concrete products - Beam-and-block floor systems - Part 1: Beams
Precast concrete products - Floor plates for floor systems
Precast concrete products - Foundation elements
Precast concrete products - Masts and poles
Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
Precast concrete products - Retaining wall elements
Precast concrete products — Beam-and-block floor systems — Part 4: Expanded polystyrene blocks
Precast concrete products — Linear structural elements
Prefabricated reinforced components of autoclaved aerated concrete.
Prefabricated stair kits
Prefabricated wood-based loadbearing stressed skin panels (superseding technical specification “ETAG 019”)
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
Resilient, textile and laminate floor coverings - Essential characteristics
Resilient, textile and laminate floor coverings - Essential characteristics
Road traffic noise reducing devices - Specifications
Rubber modified bitumen binders
Screed material and floor screeds - Screed materials - Properties and requirements
Self-supporting double skin metal faced insulating panels — Factory made products — Specifications
Smoke alarm devices
Smoke and heat control systems - Part 10: Power supplies
Smoke and heat control systems - Part 3 : Specification for powered smoke and heat exhaust ventilators
Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators
Smoke and heat control systems - Part 7: Smoke duct sections
Specification for ancillary components for masonry - Part 2: Lintels
Specification for masonry units - Part 6: Natural stone masonry units
Specification for masonry units - Part 1: Clay masonry units
Specification for masonry units - Part 2: Calcium silicate masonry units
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Specification for masonry units - Part 5: Manufactured stonemasonry units
Specification for mortar for masonry - Part 2: Masonry mortar
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
Steel casting for structural uses
Steels for quenching and tempering for construction purposes - Technical delivery conditions
Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specifications
Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specifications
Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specifications
Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products specifications
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specifications
Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification
Thermal insulation products for buildings - Factory made products of expanded cork (ICB)- Specifications
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specifications
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specifications
Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation
Three dimensional nailing plates
Timber building kits (superseding technical specification “ETAG 007”)
Timber structures - Connectors - Requirements
Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
Timber structures - Structural laminated veneer lumber - Requirements
Timber structures — Glued laminated timber and glued solid timber — Requirements
Variant: Non-load-bearing permanent shuttering kits or systems based on hollow blocks or panels of insulating materials and sometimes concrete: hollow blocks resistant to seismic actions
Waterproofing admixture for concrete
Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
Wood flooring and parquet — Characteristics, evaluation of conformity and marking
Wood-concrete composite slab with dowel-type fasteners

Source: EU Single Market Compliance Space (SMCS), retrieved 2026-06-23.
https://webgate.ec.europa.eu/single-market-compliance-space/notified-bodies/free-search?text=3205

This page is an informational mirror of the official register. It is not affiliated with the European Commission. Always verify the current designation and scope against the official SMCS record before relying on it.